From University Lecturer to Chief Academician

The metal laboratory of Xijing Jiaotong University, whose full name is New Metal Material Technology Laboratory, is rated as a national key point, and its research direction focuses on rare metals.

In the direction of metal material manufacturing, that is to say, the method of adding rare elements makes the performance of metal materials more excellent.

Although the research direction of the laboratory is very high-end, most of the time it is limited by funding issues, and it is very difficult to do research in related fields.

Last year, the metal laboratory applied for the super-compressive alloy material project. It has been working on this project for a year and a half until now, and the funding it has applied for has also reached the peak of the material fund--

12 million.

The Department of Materials Science of the National Science Foundation controls the number of projects funded each year within 20, and the maximum budget for each project application is 15 million.

Most of the material projects that have been approved will not have more than 10 million funding.

Therefore, being able to apply for a funding of 12 million can be said to be the upper limit of national fund project funding.

But compared to similar projects, the 12 million funding can be described as pitiful, because material research is very expensive, especially metal materials, alloy materials, and the application of some rare metals. The cost of materials will be a staggering figure.

The Alloy Laboratory of Donggang University is the same project, which has received as much as 37 million yuan from the Aviation Group.

Therefore, most of the similar projects are horizontal cooperation with enterprises, or they are doing research and development within the enterprise, and it is very difficult for the materials laboratory of a university to apply for the project, and it is very difficult to achieve results.

Now the new metal materials laboratory has encountered a problem. Several consecutive experiments have not made progress, and due to funding constraints, they have no way to continue to do experiments.

The whole laboratory looks very idle, and many people feel that there is nothing to do.

At the same time, some people are also very busy. They hope to find the problem so that the experiment can be made more efficient, and strive for the next experiment to make the research and development progress instead of stagnant.

Wan Yiming and Shi Guifang are two of the busiest people. They are Ph.Ds in Computational Materials Science and both are researchers in the Metal Laboratory.

Wan Yiming is 45 years old and is also a professor at Xijing Jiaotong University. He mainly does experimental data analysis.

Shi Guifang is doing data calculations.

In terms of guiding the direction of the experiment, Wan Yiming is definitely the one with the most say, but at the same time, he is also the one with the least say, because the data analysis he has done is of little help to the experiment.

If you have the ability, you have the right to speak.

If the work that has been done does not contribute to the experiment, the work becomes meaningless.

Wan Yiming has been trying to change this situation, but the complicated data is in front of him. He has used many methods, but there is no way to draw a clear conclusion. He is scratching his head in the office.

Shi Guifang answered the phone, "Professor Peng? I see, I'm going now." She put down the phone and hurried out.

Wan Yiming immediately asked, "Is Professor Wang Hao here?"

"right."

"Wait for me, let's go together!"

Wan Yiming simply followed Shi Guifang out.

He didn't have a clue when studying the data in the office. At the same time, he also knew that Wang Hao was hired by Peng Hui for one hundred thousand yuan to help with data analysis. He also had a kind of curiosity and comparison in his heart.

Data analysis is his job.

Now that an 'outsider' is invited, it is tantamount to denying his job.

Although there has been no progress in the work, and it is impossible for 'outsiders' to affect his status in the laboratory, he still feels a little uncomfortable.

Wang Hao has already arrived at the school gate.

He didn't bother the lab to send someone to pick him up, so he found it himself, and only called when he arrived.

Wan Yiming saw Wang Hao at the school gate, and at the same time was surprised by his youth. He stretched out his hand and sighed, "Professor Wang Hao, you are so young."

"I've read a lot of your reports. It's amazing that you have achieved so many top results at your age!"

Wan Yiming was a little uncomfortable with Peng Hui asking outsiders to do data analysis work, but Wang Hao had no reason to show it.

"You're welcome."

Wang Hao exchanged a few words with Wan Yiming, and the other Shi Guifang had already met, so he followed the two to the metal laboratory, and on the way he also talked about his intentions.

"I studied the experimental data carefully, and the content inside is too complicated. I don't understand a few points."

"Also, I want to know the overall process of the experiment."

Wang Hao's straightforward statement made both Wan Yiming and Shi Guifang feel a little better.

Few people can directly admit their own shortcomings. The other party directly said that he did not understand the content, and even came to the metal laboratory. It is best to explain that he is serious about his work.

Shi Guifang treated Wang Hao more warmly than Wan Yiming.

The last time at Xia Guobin's home, Wang Hao left her with a negative impression. Later, after hearing Peng Hui's explanation on the plane, she knew that Wang Hao asked for 100,000 yuan. For him, it was just to find a reason to participate in the project At the same time, Wang Hao is also a "super high-paid person" in academia.

Shi Guifang's view is naturally different.

It's not that she worships money or anything else, but that Wang Hao obviously has a high income and does mathematics and computer research, but he still agrees to participate in their projects. It's hard work and not much rewarding. He must really want it. Do a good job of data analysis, hoping to help them solve problems.

To treat such a person, of course, you have to be more enthusiastic.

After arriving at the metal laboratory, Wang Hao also met Peng Hui and others, and several people took him to visit the laboratory together.

The new metal material laboratory is a national key laboratory, the scale is very large, the laboratory has a special data analysis office, and the lower part is divided into several small laboratories, the first floor to the second floor are everywhere The equipment room contains various research-related high-tech equipment.

At the same time, the laboratory is also equipped with a medium-sized operation room. Entering the operation room feels like entering a small factory, with high-pressure furnaces, pressing machines, condensation furnaces and other equipment inside.

Wang Hao turned around carefully, but his expression was very flat.

The environment here is similar to that of the alloy laboratory of Hong Kong University in the Middle East. Even in terms of high-end equipment, the alloy laboratory is better.

The advantage of the metal materials laboratory is that it is relatively large in scale, busy with people coming and going, and the research and development atmosphere seems to be very good.

After visiting the laboratory, Wang Hao directly explained the purpose of his visit. He didn't want to waste any more time, hoping to directly achieve his goal.

"I don't know much about the structure of the experimental data."

"There are a few places I don't understand, and I hope to know the whole process of manufacturing."

This involves scientific research secrets.

Because of this, Wang Hao came directly to the metal materials laboratory.

A group of people went to the data analysis office.

Wan Yiming opened the data content on the computer, and specially explained it to Wang Hao. He is in charge of this part of the content, and he can be said to be the person who knows the experimental data best.

Wang Hao asked questions one by one about the things he didn't understand.

Wan Yiming explained very carefully. Later, he found that Wang Hao seemed to be a little ignorant of the whole, so he gave a whole explanation just now, "In the initial part of the experiment, we used three methods, that is, three directions to explore sex studies."

"One is that it has been abandoned now, that is, the first part of the data, which is to study new titanium alloys and add new element ratios."

"But later it was found that there was insufficient funding, and it was impossible to complete the research, so I gave up."

"The second method is to increase the strength of the structure through texture hardening, especially to improve the strength, length and reliability of the multi-component structure."

"This part of the data is in the middle. You see, there are marks and instructions here."

Wan Yiming pointed to a place, then opened the second half of the first part of the data, and continued, "The third method is to improve the layered composite and physically reduce the defects on the metal surface to ensure the strength of the ultra-high structure. ..."

Wang Hao listened carefully to Wan Yiming's explanation, and when he encountered something he didn't understand, he asked, "The first part, the new element ratio, how did you decide?"

"This is very complicated. We have some basic research. In this direction, properly adjust the ratio of elements, apply the original materials, and do welding and compounding..."

Wan Yiming continued for a long time.

Wang Hao understood more details, so he expressed his own understanding, "That is to say, based on past experience, I hope to be able to multi-element alloying, right?"

"Diversification by adding incidental elements can improve the strength, toughness and other indexes of the alloy. Have you explored the addition of rare elements?"

"For example, vanadium, this metal can improve the uniformity of the internal structure. In addition, in terms of process, it can also be strengthened by heat treatment..."

"Balabara~~"

Wang Hao talked a lot in a row, but he didn't have any cutting-edge suggestions, only some questions about the experimental process.

For the research of ultra-high pressure alloys, he has participated in the project experience, there are many contents in his memory, and he also has a certain understanding.

While explaining, Wan Yiming also discussed with Wang Hao.

The discussion between the two attracted other people to come and watch, because some new ideas were involved, which might also help the experiment.

When more people participated in the discussion, Wang Hao felt a steady stream of inspiration in his mind, and all the puzzles seemed to be cleared up.

He had a sudden feeling, "So it's like this..."

"This part is the data of heat treatment. I have never understood why there is such a large index difference, so it is."

"As soon as you say that, I understand, but, Professor Wan, look at this part, why not add a step of rapid cooling and quenching after smelting?"

"I think adding a rapid cooling and quenching after smelting may have a better effect, and it may be helpful for the final strength improvement."

"The temperature control is definitely different, this needs to be explored, but this step, I think it will be very critical..."

"Theoretically speaking, there will be a special effect between the elements inside the alloy due to rapid cooling..."

"in the case of……"

Wang Hao began to speak carefully about one question, and then jumped to another question after a while.

In the process of talking, more people gathered around, including Peng Hui who was "not interested", two other researchers, and some associate researchers and doctoral students passing by.

Wang Hao suddenly felt more inspired.

He found a very important problem, because what the system feedbacks is correct understanding. When it comes to the manufacturing process, it can smoothly sort out the best process in the "theoretical sense" based on the feedback content.

This discovery made him feel very excited, because the manufacturing process of similar materials is very critical. Knowing the optimal process in the theoretical sense means that the direction is definitely right.

Of course, the details of the manufacturing process are more important.

Every manufacturing process will involve the control of temperature, speed, stretching force, etc. The detailed control needs to be explored through experiments and data analysis.

Wang Hao talked continuously for more than forty minutes. His condition was getting better and better, and he even used a teaching coin subconsciously. A group of people next to him had become students. They listened and nodded thinkingly. Some people even took out a pen and paper to take notes.

The performances of Peng Hui and Wan Yiming were the same.

After listening to Wang Hao's explanation, they all found that they had gained a lot, and they all planned to try it according to the content.

When Wang Hao stopped to take a sip of water, many people around him felt that something was wrong, "Wang Hao... didn't he come to learn and understand? Why does he seem to be here to guide the work?"

"He is here to guide the work. We can't find the direction of the experiment. He said a few words and there is a direction..."

"He is so professional!"

"Didn't the Internet say that Professor Wang Hao doesn't understand materials research? Why does he seem to understand it very well? It feels like he knows more than me."

"That's what Donggang University said, it must be a lie, fake news!"

"..."

Peng Hui felt weird. He also wanted to let Wang Hao feel the professionalism of the metal laboratory, but he didn't expect that the laboratory would be guided in reverse.

Wang Hao looks much more professional than them!

"Is this called not understanding material science?"

"If there is such a person in the laboratory, why worry about research without direction?"

"I really don't understand... Chen Jianlin, why would he be so stupid to let such a genius in alloy research take the blame for the mistakes in the laboratory?"

"The investigation team of Donggang University actually said that such a person does not understand materials science... What a joke!"

finally.

After Wang Hao finished talking about the suggestions on the manufacturing process, he still felt a little unfinished, but he thought that he was here to ask questions, and it was enough to give some personal suggestions.

Data analysis work is the most important.

Seeing that the time was about the same, and he had enough understanding of the experiment and data, he got up and prepared to have dinner.

Shi Guifang was in charge of entertaining Wang Hao, so she stood up and wanted to go out with him.

Wang Hao quickly waved his hand and said, "No need, I have an appointment with another friend, Professor Ruan Hailong from the School of Computer Science, you don't have to worry about me."

He left after speaking.

When Wang Hao disappeared at the stairs, the data analysis office was really quiet for a while, and everyone seemed to be calm, digesting what Wang Hao said just now.

Peng Hui stood up suddenly, and asked with a loud voice, "Did you remember everything Professor Wang Hao said just now?"

You look at me and I look at you, and you are not sure if you remember it completely.

Ma Yiming said immediately, "Professor Peng, don't worry, there are surveillance records."

"good!"

With a wave of his hand, Peng Hui began to direct the work, "Hurry up! Adjust the monitoring records, and review what Professor Wang Hao said, and we will design a new experiment!"

"As long as the step of rapid cooling and quenching after high-temperature melting is added, I have a hunch..."

"It will definitely increase the strength of the finished product!"

He said that the whole person cheered up.

Pumpkin understands the urgency of reading, but don't worry too much, I have really worked hard, and I haven't gone out for more than half a month. I have 8 or 9 thousand words a day. Although it is not tens of thousands, it is almost the same. I have to think about the plot of the chapter for a long time, and I have to check a lot of information. The main thing is to hope that the writing will be better, not just the number of updated words~~~