Synthesis of everything starting from models

Chapter 18 Synthesis continues (please vote for reading recommendations)
Despite this, Brother A weakly asked Mr. Feng again: "Mr. Feng, is there something wrong with this? This should explode!"

"Of course it will explode. Didn't I just tell you that the model will be damaged? But it shouldn't be a big problem. There will be no problems with the three parts I just replaced. Don't worry!"

After answering without any concern, Chief Engineer Feng immediately brought up a special fixture from under the operating table.

This particular mounting bracket is none other than the one they used here to initially test the pistol.

Soon after Chief Engineer Feng's skillful operation, the model was fixed on the fixture in a grand manner. Then he took out a nylon tie and tied the household registration insurance.

And tied a drawstring to the trigger. After finishing these things, Chief Engineer Feng carefully turned off the trigger safety, and then quickly pulled Brother A, who was still dazed aside, and retreated behind a transparent explosion-proof wall. .

Chief Engineer Feng now looks like a child who has found a fun toy, and he can't contain the excitement on his face.

"Xiao Wu, are you ready? What is about to happen is definitely a scene you have never seen in your life!

You have to look carefully and nod when you are ready, I am going to pull the rope! "

When Xiao Wu heard this, he also locked his sight on the model at the shooting position, but he was unusually obedient and his eyes did not move at all.

Looking at Xiao Wu who was watching carefully next to him, Chief Engineer Feng also lowered his gaze directly in front of him. At this moment, the drawstring in his hand was already tightened.

"3, 2, 1; let go!"

As Chief Engineer Feng finished speaking, he pulled the tight rope hard, and then a flash of fire appeared at the shooting position directly in front of the two people.

Along with the fire, there was a bang, and then there was a crisp sound of a bullet hitting a metal target 15 meters away from them.

At this time, the two of them looked at the clamp again. The model that had been clamped on the clamp just now had only a handle left. As for the upper body such as the sleeve, it had been blown away long ago.

This includes the replaced barrel, firing pin, and firing pin return spring.

Just now, the model was like a goddess. The upper part was blown up and splattered everywhere, and some of the parts that were blown away were still burning.

When Chief Engineer Feng saw that the model had been blown up, he looked so happy, just like a child who had to put a basin on top when ordering firecrackers. He just wanted to see the basin blown up. No, it should be the scene of the model being blown up.

"Xiao Wu, my idea is really right. Did you see what just happened? I think our country's laws and regulations on firearms need to be revised!

Let me just say, can this thing that is interchangeable with real gun parts really be called a model?
I think it's more appropriate to call him a gun. Although this thing exploded, I think it should really be a gun. "

Brother A was really speechless at this time, and he couldn't help complaining to Li Anchor. This thing that can be interchanged with real gun parts, can it be called a model?Your model is so lifelike that it could be regarded as a real gun.

Compared with the ongoing tests in Hanyang, Li Ao did not go to the live broadcast that day. Instead, he ran to the factory early in the morning.

The order production site matter has now been resolved, and the factory building has also been partitioned with aluminum alloy doors and windows. The finished products, raw materials, production, office and other areas are all divided reasonably.

Li Ao didn't do anything else here today. He just wanted to prepare the venue, so of course the machine couldn't lag behind.His current workload is still quite heavy. He has been used to using synthesized printers these days. If he is asked to use an unsynthesized printer, he is obviously not used to it. After all, it is easy to go from frugality to luxury, but it is difficult to go from luxury to frugality. .

Li Ao came to the factory alone and did nothing else. The first thing he did was to draw the curtains on all the windows tightly so that no scene in the factory could be seen.

This means that the matching rolling shutter doors on the windows he customized have not yet been completed. Otherwise, it would be much better than just using curtains, but it is enough for now.

The curtains were drawn and the door locked. In broad daylight, with the help of the workshop's headlights, Li Anchor began to take action on the batch of printers that had arrived.

After removing all the outer packaging and placing the printers in front of him one by one, Li Anchor began to dismantle the brand-new, never-used light-curing 3D printer.

Li Ao also had an idea why he chose to start with light curing. The fused deposition type has been synthesized and the final effect is already known.

However, a light-curing printer has not been synthesized yet. He now wants to know what kind of incredible effect the light-curing printer he synthesized will ultimately have.

As for why we didn’t start with the laser sintering printer, of course it’s because these two are the most expensive, so it’s better to be more prudent and finish synthesizing all the others first, and then finally start with the laser sintering printer.

Li Anchor was already at work, and soon the light-curing printer was dismantled by Li Anchor, and the same parts on the two printers were put together.

After all the disassembly was completed, Li Ao began to use his plug-in and began to synthesize the two identical parts.

One by one, the parts of the light-curing printer were synthesized by Li Ao from two into one, and the synthesized parts have changed a lot compared to before.

Not only have they become larger, but the parts have also become more refined due to synthesis. The workmanship after synthesis is as if it is natural, and there is no scientific reason at all.

Anyway, it is so unreasonable to combine all the parts.

Li Ao looked at the parts that had finally been synthesized through his unremitting efforts, and then started to assemble them.

After all, it was synthesized and upgraded from a prototype light-curing printer, so there were traces to follow in the assembly. During the process of assembling the printer, Li Anchor did not encounter any problems that he could not solve.

The printer was quickly assembled by Li Anchor's hands. The reassembled light-curing printer was much enlarged compared to the prototype standing next to it.

Not to mention how many times the fuselage has been enlarged, the area of ​​the printing platform alone is 64 times the original size. This still does not take into account the printing height.

原来的尺寸只是125*125*165mm大小，总共的体积也就只有2.5升多的样子，然而现在却成了1*1*1.6m的大小，这可是足有1600升。

The volume is 640 times that of the original. Just in terms of size, this printer has made a qualitative leap compared to the original.

When Li Anchor assembled the printer, he immediately had the urge to try something out.

(End of this chapter)