Synthesis of everything starting from models

Chapter 17 Replacing Parts (please vote for reading recommendations)
Chief Engineer Feng watched Brother A put it on the operating table, and then took off the model's magazine without saying a word.

The box of ammunition I received was opened, and seven real bullets were taken from it and pressed into the model magazine. The real bullets were pressed into the model magazine one by one. There was no obstruction at all, and it was extremely smooth.

"Ha, Xiao Wu, come here and take a look. It's exactly what I imagined. Your model magazine can probably be used as a real magazine!"

As he said this, Chief Engineer Feng had already inserted the magazine full of real ammunition into the real 1911.

With a click of the latch, the magazine was inserted and still in place.

"Sure enough it works! This magazine has been confirmed and is 100% as versatile as a real magazine!"

After Chief Engineer Feng inserted the model magazine, he began to pull the sleeve. A real bullet originally contained in the magazine was pushed into the chamber of the gun by the reset sleeve.

But instead of shooting, he pulled the sleeve open again. As the sleeve was pulled open again, the unfired bullet in the chamber was ejected from the gun.

With the first real bullet being ejected, the remaining six bullets in the subsequent magazines were quickly ejected one by one.

Bullets hit the operating table one by one, and Chief Engineer Feng looked at Brother A with a proud look on his face.

But Brother A is really not calm anymore. The simulation model he bought has a magazine that can actually be used on a real gun. Looking at Chief Engineer Feng's extremely smooth operation, he was already imagining Li Anchor being taken away. picture.

"Xiao Wu, come here and give it a try! I've had this shot before, feel the difference!"

As he spoke, Chief Engineer Feng placed the 1911 in his hand on the operating table and greeted Brother A who had been watching next to him.

Xiao Wu, who was called, walked to the operating table with some anxiety and followed Chief Engineer Feng's instructions and went through the operations that Chief Engineer Feng had just performed.

The magazine is in the real gun, and the various functions work well with the real gun, but this is the scariest thing.

The magazine of a model can actually be used as the magazine of the real thing. How can this not be scary!

"Mr. Feng, it's really versatile! There are no obstacles in between, and the journey is very smooth!"

Chief Engineer Feng nodded while continuing to operate. This time, he did not touch the real bullet. Instead, he pressed the mechanical bullet into the real magazine and inserted it into the real gun.

Chief Engineer Feng, who has already understood the principles of the model, knows that the operation of the model and the real gun are basically the same, and the firing of the bullet is also completed by the firing pin.

This basically confirms that mechanical bullets should be usable even if they are placed in real guns.

I saw Chief Engineer Feng insert the magazine full of mechanical bullets, pull the sleeve to load the mechanical bullets, turn off the safety and everything, and pull the trigger at the pistol target ten meters away.

As the hammer hits the tail of the firing pin, the firing pin is released and hits the tail of the mechanical bullet, and then the warhead of the mechanical bullet is ejected from the barrel of the gun.

But the action only ends here. After all, the real 1911 uses the automatic principle of a short-recoil barrel. There is no gunpowder in the mechanical bullet, and no chamber pressure is generated in the barrel.

Therefore, the sleeve will not be pushed away at all, and there will be no subsequent series of actions such as shell ejection and loading, and subsequent actions will not occur.

Chief Engineer Feng looked like he had expected it, and he pulled the sleeve again to manually throw out the cartridge case. Then the next mechanical bullet was pushed into the chamber, and when he was ready, he pulled the trigger again.

Just like the last action, there was no follow-up action after the warhead was pushed out. Chief Engineer Feng just pulled and fired one round to empty the magazine.Brother A, who was watching next to him, was stunned at this moment. He never thought that a model could be played like this. The mechanical bullets could actually be used in a real gun, although it only allowed the real gun to operate at half the stroke.

"Mr. Feng, this..."

"Xiao Wu, do you want to ask what's going on?
In fact, it doesn't matter. The design of your model is very clever. The firing principle of the bullet is basically the same as that of the real bullet. It is also fired by the firing pin.

What’s more, the caliber of the model bullet is the same as the caliber of the real bullet, so it’s like this!
But after all, this is a mechanical bullet, and there is no chamber pressure in the barrel, so the subsequent short recoil of the barrel cannot be completed, and the sleeve cannot be opened automatically.

This results in the situation of pulling and hitting. The model in your hand is not only ingenious in its main body design, but the mechanical bullet is also quite exquisitely designed. "

Chief Engineer Feng briefly explained the principle to Brother A, but the movements in his hands did not stop, obviously he wanted to do some other experiments.

Zhen 1911 was quickly dismantled by Chief Engineer Feng, and the parts were placed on the operating table. Then he took the model over again, and with the same action, the model was also dismantled. Scattered.

I saw Chief Engineer Feng put aside the firing pin and firing pin return spring that were removed from the real 1911, and then put the barrel together as well.

Then these three important parts were replaced with the plastic ones on the model, and they were quickly assembled together.

Soon, although Chief Engineer Feng was holding the model in his hand, it was much heavier than before, and it felt slightly pressed on the hand, and it became more and more like a real gun.

When he took the model with replaced metal parts in his hand, he remembered something, and then turned to look at Brother A standing aside.

"Uh, um, Xiao Wu, I have something to tell you.

I'm going to do a test on your model next, and it's very likely that the model will be damaged in the next test.

It’s just that the model is damaged. It’s okay. After you try it, I will give you money and you can buy one yourself! "

Brother A stood aside and could only nod. Chief Engineer Feng had already said so. How could he disagree? Besides, he was not given a chance to object.

Just like that, Chief Engineer Feng looked at Brother A who had already nodded, and put down the burden, and then pressed a real bullet into the model magazine again.

The magazine containing only one real bullet was inserted into the model gun with replaced parts by Chief Engineer Feng, and then he was seen pulling the model's slide.

Under the dumbfounded gaze of Brother A, the real bullet with the unique metallic luster of brass was pushed into the barrel of the gun like a farce.

"Mr. Feng, are you going to use this model for a live fire test?"

Seeing Chief Engineer Feng's operation, Brother A, who had roughly guessed something, felt that his liver was trembling. He asked Chief Engineer Feng nervously for confirmation.

"But, Xiao Wu, you actually figured out my intention! You're quite smart!"

Brother A is full of helplessness at this moment, and he is constantly complaining in his heart. You have done this so obviously. If I can't see it anymore, then I will be a pure fool.

(End of this chapter)