industrial overlord

Chapter 481

The situation is the same as Lin Zhenhua imagined.At the opening ceremony, Deputy Chief Tang delivered an important speech, reiterating his previous evaluation of China's machine tool industry: weak independent innovation capability, high foreign dependence, unreasonable industrial structure, and weak international competitiveness.His speech was not long, and he left after speaking, followed by speeches by leaders of other departments and representatives attending the meeting.Everyone's speeches are naturally closely related to the spirit of Deputy Chief Tang's speech, and they are all about strengthening independent innovation and participating in international competition.

"Our Hannan Machine Tool Company is determined to take the spirit of Deputy Chief Tang's speech as a guide, and under the guidance of the State Planning Commission, the State Machinery Commission, and our provincial and municipal leaders, we will aim high, work hard, lay a solid foundation, and deepen reforms , be realistic and innovative, seize opportunities, and achieve a step in two years. By the end of this century, Hannan Machine Tool Co., Ltd. will enter the top 100 in the world's machine tool industry."

On the podium, a middle-aged man waved his giant hand, expressing his determination impassionedly.The audience sitting in the front row frowned, calmly holding up the portfolios handed out at the meeting to block the spittle that fell like flying flowers and jade.Damn, you really deserve to be someone from a machine tool company who sprays coolant even when you give a speech.

"Manager Mao, this is an internal seminar in the industry. Regarding the issue of understanding the spirit of the leaders' speeches, you can be brief. The key point is to talk about your specific plans." Li Mozi, an official from the Machinery Committee who presided over the meeting, couldn't help but reminded.

This man was Mao Shuihong, the general manager of Hannan Machine Tool Company. Hearing Li Mozi's reminder, he nodded quickly, turned over three pages of his speech, and picked a place to continue reading: "In the next six years, , we plan to develop 6 to 15 new machine tool products through the combination of introduction, digestion, absorption and independent innovation. Among them, the CNC high-speed vertical machine with a spindle speed of 20 revolutions per minute and a table moving at a speed of 15000 meters per minute Horizontal machining center, the positioning accuracy is less than 50 microns, and the repeat positioning accuracy is less than 5 microns, reaching the world-class level.”

"Well, very good!" Li Mozi said in an appreciative tone, "High-speed and high-precision machining centers are a big gap in our country's machine tool industry. If you can fill this gap, you will have made a major contribution to the country. "

"Our Hannan Machine Tool Co., Ltd. is a key enterprise built during the first five-year plan of the country. All our employees have always taken the revitalization of the national machine tool industry as our duty. We are determined to carry forward the spirit of hard work and fearlessness of the old Hannan people, and we are willing to die. I vow to die to conquer the problem of high-speed and high-precision machining centers.” After being praised by Li Mozi, Mao Shuihong’s speech addiction broke out again.

"Manager Mao, as far as I know, your Hannan Machine Tool Company has just reached the level of foreign countries in the early 60s in terms of traditional milling machine manufacturing, and the CNC technology is basically blank. You plan to use 6 years to complete the process. The road of 40 years... Well, even if it is the road of 30 years, by 2000, it will reach the level of the early 90s abroad. Do you have any specific measures? Can you tell us so that our colleagues can learn from it? one time?"

Finally, someone in the audience couldn't help standing up and making trouble.Everyone turned their heads to look, and they couldn't help discussing in low voices.In this circle, there are quite a few people who know this speaker. He is Lin Zhenhua, chairman of China Hanhua Heavy Industry Group, a legendary young man.

Lin Zhenhua originally didn't intend to be so public. In fact, he has always been a relatively low-key person.But for a while, he couldn't bear it anymore. The people who spoke in front of them were more unreliable than the other. If they continue to talk like this, it is estimated that some people will dare to say that the Star Destroyer will be developed before 2000.

"Specific measures..." Of course, Mao Shuihong could hear that Lin Zhenhua was attacking him. He was a little annoyed, but it was obviously inappropriate for him to be furious when he was sitting on the rostrum.He knew Lin Zhenhua well, and knew that Hanhua Machine Tool Company was the strongest in the country in terms of CNC machine tools, so he boasted too much, and he really couldn't hide it from a knowledgeable person.

"Our specific measures include, first, firmly establish the concept of self-improvement, guide all employees in the factory with correct world outlook, outlook on life, and values, correct their thinking, and unite as one..."

"Why do I think this measure is also suitable for guiding pig farms?" He Lan murmured to her colleagues in a low voice. Way to demolish Mao Shuihong's platform.

"...Fifth, we have formulated a feasible high-speed, high-precision machining center development plan. In the next three years, we plan to invest 500 million yuan per year in technology development to overcome high-speed servo motors, ball scales, and precision lead screws. Wait for more than 20 technical problems, and strive to come up with the first prototype before April 1998." After Mao Shuihong said countless nonsense, he finally had a little dry stuff.

"How do you plan to implement the funding issue?" Li Mozi asked softly.

Mao Shuihong's face turned red all of a sudden, and his voice was an octave lower. He said in a low voice, "In terms of funds, we plan to raise part of it ourselves. However, the Machinery Committee also knows that our benefits are not very good. The year before last There was a small loss compared to last year, and the situation in the first few months of this year is not optimistic, so the funds are relatively tight. We hope that the Machinery Committee can help us to coordinate and strive for... more than 300 million yuan of technical transformation funds for us every year, to help We have accomplished this mission.”

This is the real purpose of Mao Shuihong's rhetoric before. Before that, he planned to apply for an annual fund of 500 million from the Machinery Committee, but after being held back by Lin Zhenhua, he felt that all the funds should be borne by the Machinery Committee. It was too embarrassing to face, so he resentfully reduced it by 200 million.In his heart, he had already greeted all of Lin Zhenhua's family, young and old.

"Three years, with an investment of 500 million a year, you can jump from the level in the early 60s to the international level in the early 90s. Can you tell me how you did it? Forgive my ignorance, I really can't see it." What is the feasibility of this plan?" Now that Lin Zhenhua had stood up, he didn't bother to hide his head and tail, and he directly pointed out the crux of the problem.

All of a sudden there was a commotion in the venue. Everyone was in the machinery business, and they were no strangers to scientific research, technological innovation, and the like.China's machine tool industry is not very big, especially the old-fashioned enterprises like Hannan Machine Tool Company. Everyone knows the technical level. Although it is not as clear as Lin Zhenhua's understanding, it is not too far behind.With the current level of Hanhua Machine Tool Company, a total of 1500 million yuan has been invested in three years. It is really a bit of a dream to make the technology reach the level of reborn.

In fact, everyone also understands that this practice of Hannan Machine Tool Company is not uncommon in the industry.First draw a big pie, and then ask the national lion for money. When the time comes, the things are not produced, so just make up a reason and deal with it.The state's money is invested in state-owned enterprises, and the meat is rotten in the pot. Can you still chase after it and get it back?
However, this Lin Zhenhua is a heretic. He actually pierced the window paper in public. How can this make everyone feel embarrassed?
The last one to come to Taiwan is naturally Mao Shuihong.He didn't care about his reserve anymore, he patted the table directly, and asked with raised eyebrows: "Chairman Lin, I want to know what you mean! I know that your Hanhua Machine Tool Company has a good record, but our Hannan Machine Tool Company has also done well." It's not trash. We are all in the same industry, so it's interesting for you to gossip like this!"

Li Mozi had no choice but to get up to smooth things over: "Manager Mao, don't get excited. Manager Lin's side, I think, is just for discussion. Our meeting itself is a seminar, and free debate is allowed, whether it is reasonable or not. Manager Lin, since you have some disagreements with Manager Mao's point of view, can you also come to the stage and share your thoughts with everyone, so we can discuss it together, okay?"

"Hmph, well, let me hear what Chairman Linda has to say." Mao Shuihong angrily moved the microphone in front of him to the side, giving up the right to speak.However, he didn't intend to get up and step down to return to his position, because if he stepped down, it would mean that he was really pushed down by Lin Zhenhua.He had to sit on the stage, waiting to point out Lin Zhenhua's mistakes and save some face.

Lin Zhenhua knew that this was not the time to be polite. He just messed up Mao Shuihong's situation. If he refused to come on stage to express his views, it would be a disturbance, and everyone would look down on him.He strode up the steps beside the rostrum and came to the position where the guests were speaking.In front of everyone, he nodded to Mao Shuihong first, and said, "Manager Mao, I'm sorry, I interrupted your speech just now."

"Hmph, it's nothing. Didn't Director Li say it? I don't know why. I'm just waiting here to hear what Manager Lin has to say." Mao Shuihong said coldly.

Lin Zhenhua took the microphone that Mao Shuihong had just removed, and said to everyone: "Okay, leaders, experts, colleagues, I will simply state my point of view. I am a person, and many colleagues here may know Yes, my name is Lin Zhenhua, and I am the chairman of China Hanhua Heavy Industry Group Co., Ltd. in Jiangnan Province. Hanhua Machine Tool Company is a subsidiary of our group, so I can be regarded as one of the practitioners in the machine tool industry.

Just now, I hastily interrupted Manager Mao's speech. This is very impolite behavior. I would like to express my apology to Manager Mao.However, I think that at this meeting, we said too many high-sounding words. Manager Mao's speech was nothing more than repeating these words, so I don't want to listen to it anymore.

What I want to tell you is that we don't have time to talk about these fancy words. China's machine tool industry is facing a situation surrounded by wolves.The wolves have come, if we are still doing this kind of ostentation here, in the end we will all be eaten to the bone! "

(End of this chapter)