There is a Garbage Recycling Station In My Mind

"There is a garbage recycling station in my mind (!

The time soon came to the end of May. During this period, the last recruited personnel came to Lantian Intelligent to report one after another. The factory is getting bustling day by day.

In the past, the owner of Zhongcheng Electric set aside almost half of the area on the top floor of the factory building for the staff dormitory. Luo Jiu went and took a look. The layout was similar to the dormitory he lived in when he was in high school.

There are four canopy beds in one room, two floors above and below. However, unlike the school, where people sleep on both floors, the dormitory in the factory is used to make beds on the first floor where things are placed.

The conditions of such a dormitory are naturally too bad.

So after Luo Jiu took over Zhongcheng Electric's factory and temporarily planned to start construction here, Luo Jiu asked someone to renovate these dormitories.

The new dormitory is planned as a rental apartment. There are one person or two people. Each room is equipped with a separate bathroom.

At the same time, it is equipped with a water heater, air conditioner, wardrobe, desk, wife and so on. Although it can't compare with hotels and homes, the conditions of the new dormitory are still much better than those of most factories.

However, due to time constraints, those who had just arrived still stayed in the hotel for a month and did not move into the hurriedly renovated dormitory until the end of May.

Because of the hurry, the renovation engineering team started almost at 6 o'clock in the morning, and kept working until 10 o'clock in the evening, before it was considered as decorating the dormitory within a month.

However, seeing those students who just came out of school look happy to live in the new dormitory, Luo Jiu feels that the 20% more project money given to the decoration team is also worthwhile.

Because it will be put into use as soon as the decoration is finished, all the boards used to decorate the dormitory are the kind of pollution-free and zero-volatile purchased. Although it cannot be said to be the most expensive, it is not cheap at all.

During the month of decorating the dormitory, the work in the factory did not stop at all. Everyone performed their duties and worked hard to do their own work.

Because of the technical data of the county seat, the first batch of technical drawings of the smart trash can came out very quickly, and soon, several drawings of parts can be produced a day.

However, when looking for manufacturers to prepare samples for these parts, I encountered a lot of trouble.

The first design based on the data is the shell of the smart trash can. Without castration of the basic functions, the standard capacity of this trash can is 32 liters, and the volume of the entire trash can reaches 52 liters.

In this way, there is a huge space of 20 liters for the components of the smart trash can except for the trash module.

Motors, sensors, integrated circuits, power modules, etc., all take up a lot of space. In the limited space, the space for installing these components should be compressed as much as possible, leaving a larger space for accommodating various garbage. Space is what these technicians in the factory need to work hard on.

So even if you have a full set of technical data, after the preliminary technical drawings are out, everyone is still repeating the simulation assembly and continuous modification. Obviously, it is not something that can be completed in a day or two.

However, the drawings of some parts have been determined temporarily, and whether they can meet the requirements will be known until the final product is made.

Therefore, for these confirmed parts, you must first find the manufacturer to make samples.

After determining the general data of the shell specifications of the smart trash can, the technicians modified several drawings with similar appearances, and simulated the real objects on the computer.

In the end, Luo Jiu chose a design that was closest to the sample presented by the system, and decided to make this shell first.

In the design of the technicians, although the appearance of the smart trash can is similar, there are only two materials used to make the shell, a stainless steel shell and a plastic shell.

Because it is only in the sample preparation stage, it is still unclear what the final modification will look like, so a lower-cost plastic case was selected when sampling.

In the past, Zhongcheng Electric had a dozen injection molding machines of different sizes, and three of the injection molding machines with the largest specifications could be used to make the shell of the smart trash can.

Although the appearance looks simple and square, but the inside can be described as nine bends and eighteen bends. Dozens or hundreds of large and small parts should be placed in this bucket, and enough should be left. It can be said that there is no space in the place to contain the garbage, which is useless.

Although there is an injection molding machine that can produce shells, it is not just an injection molding machine to make the shell of a smart trash can.

The most important injection mold is not there yet, but now there is a drawing of the shell. Just find the manufacturer who makes the mold and make the mold.

Luo Jiu asked Li Zhi. In the past, the injection molds of Zhongcheng Electrical Appliances were all made by the previous boss according to the product parameters in the coast, and then the molds were delivered to the factory and installed by the in-house master. Production of plastic parts required.

But now because the products are still in the design stage, in a large factory of Blue Sky Intelligent, except for a few aunts in the canteen, a sweeping aunt and two old guards, everything else is used as an office. In the workshop, there is one. No one.

As for the technicians in the office, there is no problem asking them to type on the computer to draw pictures, but it might be a bit difficult for them to open the injection molding machine.

In the past, the master of Zhongcheng Electric who usually maintained several injection molding machines had found a new job long ago, and he had no intention of coming back. Luo Jiu couldn't find a good way at once, so he said to Xie Zhengdong: " First, find the mold manufacturer to make the mold first. If there is no one at that time, the mold manufacturer will send someone to install and debug it.

During this period of time, those technicians who are not easy to recruit in the production workshop can be recruited if there are suitable ones, instead of not having them when they are needed. "

During this period of time ~www.readwn.com~ the technical department based on the existing equipment in the factory and the equipment planned to purchase, the parts of the entire smart trash can account for about a quarter of the parts that can be produced in the factory. They are all parts that do not require very high technology and equipment.

As for the other parts, even if the technical requirements of the drawings are finalized, we can only find a suitable manufacturer and send it out to others for production.

Finally, all the parts are collected in Blue Sky Intelligent, and then personnel are organized for the final assembly, and they are made into trash cans one by one.

At that time, how to improve the efficiency of assembly and increase the pass rate of the final product is where Lantian Smart needs to work hard.

There is a new chapter address of the garbage recycling station in my mind: https://

There is a garbage recycling station in my mind to read the full text address: https://

There is a trash recycle bin txt download address in my mind: https://

There is a garbage recycling station in my mind. Mobile reading: https://

In order to facilitate the next reading, you can click "Favorites" below to record the reading record of this time (Chapter 121 Product Sampling), and you can see it next time you open the bookshelf!

Like "There is a garbage recycling station in my mind", please recommend this book to your friends (QQ, blog, WeChat, etc.), thank you for your support! ! ()