Take Off My Aviation Era

　　 I did what I said, so I rummaged in various file cabinets immediately. Not to mention, he really found out a lot of technical information about the high-power turbofan engine surveying and mapping that year.

Although these materials are no longer complete, they still have a strong sense of reference. For example, a turbine mapping paper found from a pile of tooling drawings describes the turbine situation of the modified turbofan engine in quite detail; The analysis data found in some material materials clearly express the alloy composition of the engine.

There are a lot of similar materials. Zhuang Jianye searched for two days with unrestrained blood, and collected a lot of them. But after sorting them out, they found that these materials are not systematic at all. They are completely the same as plasters. .

There is no way. The systematic data has been sent to City H ten years ago. What can be left is either the scrapped manuscripts at the time, or the initial data of the experiment. It is obviously impossible to use these things to build engines, but they can be pieced together. At the time, Yonghong Plant surveyed and mapped the preliminary context of turbofan engines.

　　Zhuang Jianye is not so proud to build an engine. That is something the factory director and secretary have to consider. He just wants to restore the history of the Yonghong factory.

　　 It's just that this thing is just like organizing the J-6 fighter files. The data is scary. Even if it's just fragmented initial test data, it can't be done overnight.

　　 So the blood that Zhuang Jianye burned up so hard was burned for two days and it was consumed. He began to change from a single-minded specialization to a still-minded one.

　　 Anyway, the work of organizing files is still long. Some are time to organize. The key now is to organize the main information properly so that it can be checked.

　　 When it comes to inspections, Zhuang Jianye has a headache. The new regulations of the ministries and commissions are extremely strict, requiring every file to be described in detail and indicating the source.

If this is not a problem after more than 20 years, even if it is not an electronic file of a computer, there are rules to follow in paper materials. However, the Yonghong factory has been making a lot of trouble in special times, and many technical materials are incomplete. The requirements of the ministries are obviously impossible.

For this reason, Zhuang Jianye went to Director Yan to report the situation. Director Yan took the notice issued by the ministries and commissions to look at it, and said something very wicked: "Look at what is missing, draw a gourd and fill it up by yourself. Can the comrades of the ministries and commissions go and read page by page?

　　 Zhuang Jianye wanted to do this a long time ago, and now listening to the leadership also means that, he naturally nodded his head like pounding garlic, and went back to do it.

　　 But the problem is that you have to have a gourd to draw a gourd. If you don’t have a gourd, which one should you paint?

　　Zhuang Jianye's headache is this kind of information. There is no fake template. People want to destroy these materials when they read it. At this moment, Zhuang Jianye's thoughts are going out.

There is such a document in the new technology application file of the J-6 fighter. It is said that Yonghong Factory has improved the wing forming process and introduced shot peening technology to process the wing of the J-6 fighter. It has been theoretically proved that whether it is Both the strength and the structure are several times stronger than the wing panel manufactured by traditional technology.

Based on this, the creators of the process conceived a shot peening machine, believing that the shot peening machine is the key equipment for wing forming in the future, and used a series of theoretical data to prove that this idea is quite correct. As for how the data came from, How the theory is done and what the machine is like, the first half of the data is not written.

If this is a separate document, Zhuang Jianye will not hesitate to take it out and throw it into the trash can. The problem is that many of the tooling drawings are determined based on this idea. If this document is not available, it will be in case the leader makes a ghost. What should I do when I see the tooling drawings behind, I can’t say that I fabricated it out of thin air.

　　 So this pit has to be filled in anyway. The problem is that there is nothing to learn from this innovative new process application. What should I do? Zhuang Jianye was helpless, mad, pulling his hair.

　　 I knew this a long time ago. Why did you devote yourself to the copper-aluminum tube process in the test department? How good would it be to spend some time on the wing shot peening process?

　　 Wait... The wing shot peening of the three major research topics of the Experimental Department is not just to fill this hole!

Zhuang Jianye thought more and more reasonable, and then he began to swear. What was thought of by the old technical backbone of Yonghong factory eight years ago is still a research topic for the experimental department. With this snail speed, I am not afraid of the old technical backbone. Does the factory make a face?

　　 "How to say it is also the core craft of wing manufacturing!"

　　Zhuang Jianye looked at the stubborn technical information in his hand and licked his teeth. He was uneasy when he was picked a peach a few days ago. He was immediately defeated by the inefficiency in front of him.

There is no way, I can only bite the bullet and do it myself. Who wants to make this stall? Fortunately, this is not really a new machine, new technology, just to explain in text, Zhuang Jianye feels that it is a bit of a cost Spirit can still do.

So I bit my pen and thought about the shot blasting machine I've seen in my previous life. I kept on hand and started to draw random sketches on the blank drawing paper~www.ltnovel.com~ and compared the data out of thin air. After making changes over and over again, I don’t know how long it took. Zhuang Jianye finally breathed a sigh of relief and nodded in satisfaction: "Well~~ This should be almost the same."

　　 After speaking, he wrote a series of parameters on the drawing paper that he drew in a mess.

In the next few days, according to this set of parameters, Zhuang Jianye abruptly helped the predecessors to build the shot blasting machine that he thought about in the plain text, and then looked at the technical materials he fabricated, proud He smiled and began to organize into a book, write a catalog, and prepare to be classified into files.

　　 While Zhuang Jianye was busy working alone, the door of the archives room was knocked suddenly. Zhuang Jianye turned around and saw that it was Shi Jun who had not seen him for many days.

Today’s Shi Jun, like Zhuang Jianye, is a man of the Yonghong factory. It’s just that compared to Zhuang Jianye’s negatives, Shi Jun is in a mess. In less than six months, he published two papers for the key equipment of the four branch factories. In addition to technical transformation, it also solved the problem of falling off the vertical tail rivets of the J-6 fighter.

　　 In addition, Shi Jun also has unique insights on business management, and he took the initiative to write to the factory party committee to provide advice and suggestions. While being adopted by the factory party committee, it was also noticed by the factory director and secretary.

　　 From this, Shi Jun made a steady progress. Not only did he talk to Zhuang Jianye for the first batch of promotion, he was officially transferred to the first assembly workshop as the deputy director of the process room the next day, becoming the youngest technical cadre of the Yonghong factory since its establishment.

　　 That’s not even counted. I heard that the ministries and commissions visited the factory a few days ago and specifically listened to Shi Jun’s personnel report and made it clear that he would be included in the inspection list of the third-tier cadres of the ministries and commissions.

　　 That is the inspection list of the ministries and commissions. In contrast, the third echelon of Yonghong Factory is a scum.

　　 So Zhuang Jianye became a scum when he compared with others!