Start with a blacksmith shop

The second machining center was running smoothly. On the third day, a workpiece was processed smoothly by the machine tool to the limit of accuracy. All the eyes of the many workers standing aside were staring at the transparent protective shield. workpiece inside the cover.

This process lasted for more than an hour. They hardly missed a second. They kept watching the machine tool running. When the tools in the machining center were put back into the tool magazine by the robotic arm, the whole machine slowly slowed down. came down and then stopped functioning.

Li Zhenhua also took these four assistants and opened the transparent protective cover. The five people entered the machining center and unloaded the processed workpieces from the fixture. Then several people carefully moved the workpieces out and placed them in a On the monitoring platform.

In fact, Li Zhenhua already knew the machining accuracy of this workpiece, but the workers around him did not know. He could not tell these people that the machining center fully met the accuracy standards because it had passed the analysis with his eyes.

So at his order, a worker turned around and went to the professional precision measurement equipment. The electronic precision tester was moved to the workpiece, and then began to measure the workpiece.

After this measurement, they all became very excited. Such a large machining center can actually control the accuracy so well. It really meets the original design standards. It is really an ultra-high-precision machine. Giant machining center.

After the accuracy test, all the workers' eyes lit up, and they were already thinking about how important their next work would be.

This is equipment that can greatly improve the machining accuracy of Kyushu, and it is such a huge equipment. Although they did not manufacture it, they are indeed the specific users of this machining center in the future, which makes all the workers feel extremely happy.

Because Li Zhenhua, as the designer of his equipment, will not stay here for a long time, the specific users are still them, and they are also looking forward to their future work and life.

When the manager of the engineering department saw that the machining accuracy of this workpiece was completely in line with the previously set standards, he felt excited. He felt that at this time, he could report to the superiors. The project was considered a success.

This is not just one machine, but a second machine has been manufactured. After this machining center is manufactured, there will be a third machine, a fourth machine... all the way to the tenth machine.

In other words, they will eventually have ten such ultra-high-precision giant machining centers. I believe that in the future, they will be able to make their own reputation in the field of high-precision workpiece processing.

Thinking of this, the managers of the Ministry of Works silently retreated from the factory. When they came outside the workshop, they took out their mobile phones and called their immediate boss. He reported the results achieved by the company in detail. .

After he reported the work here, the smile on his face never stopped, and he kept the smile on his face all the time, especially after just talking to the leader on the phone.

The senior leader of the Ministry of Industry in the Peking Government Affairs Council almost jumped out of his chair with joy after receiving the call just now.

Because this project did not pay much attention to safety issues at the beginning, their work department was not without trouble, but everything they did was in compliance with the procedures, and the vice president did not blame them, but only warned them.

But in the current situation, sufficient results have been achieved, and after all, they were achieved under their leadership. The leaders of the Ministry of Industry recorded all the situations they had just learned on a piece of paper.

Then he took the paper in his hand and came out of his office, walked towards the vice dean's office, came to the door of the vice dean's office, reported to the leader's secretary, and then waited for a long time.

After a long wait, the leader of the Ministry of Industry finally met the vice president and reported the news he received to the vice president in detail.

This report took a long time, and the vice president understood the entire project in detail from the Ministry of Industry.

After the leader of the Ministry of Works left the vice president, he made several calls to people in the office. By the time he finished making the calls, many elders who were on business trips across Kyushu also knew that there was someone on the island. What happened in the city.

After all the elders finished what they were doing, they began to take transportation back to Peiping. This matter had a huge impact, so they wanted to meet and talk and make new plans for Kyushu.

The leaders are controlling the direction of the Jiuzhou ship, while everyone on Li Zhenhua's side has returned to their previous working state after experiencing the excitement.

But what happened in the factory has little to do with Li Zhenhua. Now he just wants to go as fast as he can, finish the things here, and then go home as soon as possible to enjoy the life of his wife and children.

After having two machining centers, the workers' processing progress has improved again, but the overall progress has improved somewhat. After all, Li Zhenhua only has one, but all machining centers with this precision are basically made by hand. It was drawn out, so the overall progress is still at the original speed.

The third machining center has started work, and the workers in the factory here are indeed divided into two groups at this moment. One group of people are still doing their original work, which is to finely process the workpieces of the machine tools.

Another group of people started a new job. They took Li Zhenhua's drawings of their next-level precision machining center and started manufacturing the next-level machining center using some ordinary raw materials.

Between the two groups of people, neither group occupies an ultra-high-precision machining center. After such hands-on manufacturing, many workers have become more and more comfortable with the machining centers they use.

At their pace, Li Zhenhua slowly assembled the third machining center. At this time, two months had passed since he arrived here.

In the past two months, he went home once in total. He only stayed at home for a short two days before returning to the Daocheng factory to continue his work.

At this time, while Li Zhenhua was at work, he also began to think of the previous invitations from Wang Yuesheng and other leaders. He also immediately searched for information about Nantianmen and Luanniao projects on the Internet.

Of course, the information found on the Internet is definitely not real information. These are the imaginations of netizens who compiled it through simple information and then added it to many netizens.

But for Li Zhenhua, these fantasies are exactly what he needs. He doesn't know what the real Nantianmen Plan and Luannia Plan look like, but these have been processed by the minds of the vast number of netizens in Jiuzhou, and they are even more... of science fiction.

As for the overall project, although this kind of plan that has been processed by netizens seems unreliable, in reality it is very consistent with my direction for these projects.

So after he collected all the information on the Nantianmen Project and the Luanniao Project on the Internet, he took advantage of his evening break to simulate the project direction he understood in the virtual laboratory.

And whenever he encounters a difficult or unclear problem in the virtual laboratory, he will write down the relevant things first, and wait until the next day to call the dean of the Kyushu Academy of Sciences and obtain it from the Kyushu Academy of Sciences. Books on some aspects.

After the books he needs arrive, he will use the different flow rates of time in the virtual laboratory to learn quickly, that is, he will learn whatever knowledge he encounters.

What he did was actually so that he would not know anything about the real project in the future. In addition, it was actually a preview of the Nantianmen and Luanniao plans.

During Li Zhenhua's busy and fulfilling days, he also manufactured the machining centers one after another.

Time was like pressing the fast forward button, and another four months passed in a hurry. At this time, the huge factory building of Daocheng New Company is no longer as empty as before. Now the factory building is filled with ten huge five-axis linkage high-precision giant gantry machining centers.

The factory is no longer as deserted as before. All the workers have come to the factory to perform various tasks. Everyone in the factory is busy in front of their respective processing centers.

The place with the fewest people inside is where Li Zhenhua is, because he doesn't need more people here, and his four assistants are enough. No matter how many people there are, they won't be of much help.

When he installed the last workpiece that had been finely ground in his hands on the machining center in front of him, he felt as if he had let go of something and felt so relaxed.

After he installed this workpiece, it meant that his work here was nearing completion, and he could go home without having to come back again. When he thought that he would be able to spend some time with Li Yun and his daughter, he felt happy.

Thinking of these, a smile appeared on the corner of his mouth unconsciously, but then he hid the smile, and then he began to test the last machining center in front of him. As long as this last machining center passed his test, then You can pack your things at night and head home the next day.

As he pulled out a mobile hard disk workstation and connected it to the control computer of the machining center, he began to install the control program of the machining center.

As the progress bar on the screen in front of him increased little by little, he stood aside and watched, but he didn't know what he was feeling in his heart. If you want to say pride, there must be some. In addition to pride, there are also negative emotions such as fatigue and boredom. .

This project is the most boring and tedious one he has ever done so far, but it is also the most significant and basic one.

Other projects do not have the foundation of this machining center, but none of them have as huge an impact as it does. Whether it is a space suit or the J-36, those are all at this level, but the significance of the machining center is The entire surface.

When the progress bar reached the end and the screen in front of him went dark, Li Zhenhua disconnected the mobile hard disk workstation from the machining center, and then pressed the power button of the machining center.

As soon as the power button was pressed, the screen in front of him lit up again and the startup process of entering the program began. He also took advantage of this opportunity to put away his workstation.

When the screen dimmed and lit again, the machining center numbered 10 made a buzzing sound, which was the sound of the entire machining center's power system starting to operate.

As the buzzing sound continued, the machining center was performing a program self-check. Everything inside was under the control of the program and was reset to zero. When the machining center became quiet and the sound became smaller, Li Zhenhua knew that this It shows that the entire machining center is ready.

Now that the machining center has been prepared, the following monitoring procedures are still essential. There happens to be a second-level machining center currently manufacturing in the factory, so these workpieces can be manufactured using the tenth machining center.

Then he called the leader of the worker team who was working on the project and explained the matter clearly. As for the next work, he was left to complete it, while Li Zhenhua got away from it and only watched from the side. That’s it.

Then several workers use tools to push the blank of the workpiece over, then open the protective cover, lock the workpiece on the machining center, and then import the written control program into the system. The moment the start button is pressed, the entire processing The center started functioning.

Li Zhenhua stood beside the protective cover of the machining center and looked at the machinery running inside. He seemed to be in a trance, but in fact he was staring at the machining accuracy of the workpiece with his eyes.

Since he designed the workpiece, he knew all the parameters very well, and under the supervision of his analytical eye, he could see any error in the machine tool.

However, at the end of the workpiece processing, the machining center manufactured the workpiece perfectly without any errors, and it also achieved the highest precision in its design.

There is no difference in accuracy from the previous nine, and Li Zhenhua feels that the operation of this last one may be the most stable among the ten machining centers.

The first one is relatively the most variable. This is because it is the first one, the first one born under his hands, so all the production processes are not so familiar, which is why it gives him this feeling. .

The successful processing of a workpiece does not mean anything, so under his instruction, the testing work continued, and one workpiece after another was finally processed by this machining center.

After the machining center had been running for ten hours, the results were still as stable as before, which proved that the machining center had fully met his design standards, and in Li Zhenhua's mind, the acceptance was completed.

After all ten machining centers were manufactured, he started to pack up and pay homage that night. He also told Ning Wei and others about his preparations to go home the next day, and he would not be back soon after returning home this time. .