Start with a blacksmith shop

Under the huge sun screen in the open space, there is a huge metal block, and a human figure is busy on the metal block.

Before he moved on the piece of metal, he first asked him to surround the metal piece with a big hammer and hit it at specific points. The internal stress of the metal piece that originally took many years to be released, was smashed together by him. Next, all were released.

The release of internal stress prevents these metal blocks from deforming again when they are made into machine tool parts, thereby affecting the accuracy of the machine tool.

Wearing Chi You's power armor, he was busy beside the giant metal block. The soldier held the gun when he was wearing Chi You's power armor, but he was holding a bench tool scraper when he was wearing it.

The scraper made of special metal played a huge role in his hands. He scraped off strips of iron filings from the metal block. The shape of the iron filings was so regular.

Don't think that he is holding a scraper in his hand and is only processing the workpiece finely. In fact, it is not the case. Now he is making a rough blank, and he is using the scraper in a bold and aggressive manner. It feels like he is chopping wood with a big ax.

As for why he would do it himself from beginning to end instead of using machine tools and other tools to make rough blanks first, it was not only because there was no suitable machine tool, but also because he had to monitor it from the beginning to the end, and try his best to His greatest ability guarantees its precision quality.

That's why he was so willing to take the trouble to make it from a raw blank to a rough blank, all for the sake of precision.

A machine tool uses many, many parts, so it also has many parts to manufacture.

He scraped the metal blocks from cubes of various sizes into rough workpieces of various shapes. The work he completed here was only the rough workpiece, but he could not make the rough workpiece into a complete workpiece. Those tasks would have to wait until It will not be carried out until final assembly.

The final assembly location is not at Kyushu Divine Beast, but at the factory area of ​​the new company in Daocheng, which is where the machine tools will be located in the future. While the machine tools are being assembled, the rough blanks are finely processed into high-precision workpieces.

The manufacturing of the entire machine tool is extremely troublesome. There are also various wires and shielded signal wires interspersed in the middle, and electronic system hardware installed by yourself in various parts.

Fortunately, such work will be difficult at the beginning. After the first ultra-high-precision machine tool is born in his hands, subsequent machine tool manufacturing will be much easier.

Because by then, he would no longer need to manually process the parts, and the newly manufactured machine tools would be put to use. The reason for using the machine tools at this time was because he had confidence in his own machine tools.

Moreover, when the workpiece comes off the machine tool, he still leaves some margin. This margin is when his humanoid machine tool comes into play. This is also to ensure the accuracy of the machine tool.

When the new company's factory is filled with such giant machine tools, he will no longer participate in machine tool manufacturing, and the subsequent work will be completed by the workers of the new company.

By then, this new type of machining center being manufactured will enter the market as a commodity for manufacturers who need this kind of equipment to purchase and use. Of course, not all manufacturers will need this kind of machine tool, but now in Kyushu, But there is an urgent need for such a giant ultra-high-precision machining center.

In fact, this kind of machine tools are urgently needed in many military factories, such as underwater propellers for submarines, many parts of Fat Girl's engines, high-strength fuselages for fighter jets, keels for aircraft carriers, rocket manufacturing, aerospace, etc. All available.

Therefore, the demand for this kind of machining center is still quite large in Kyushu. If there are needs in these aspects, the new company will definitely not worry about running out of work when it starts.

And the significance of this machining center is not just that. After this sub-level machining center meets a small number of departments that are in urgent need of it, the rest will be arranged to three cooperative machine tool factories.

Based on the next-level machining centers, these three machine tool factories have carried out extensive upgrades in the accuracy of domestic machine tools, thereby overall improving the machining accuracy level in Kyushu.

The later ones have the widest impact on society. The first ones cannot be said to have little impact, but this information will not be disclosed to the outside world on a large scale, and the general public may not know it at all.

After the level of machining is improved, especially after this giant machining center comes into being, Kyushu will once again break the blockade imposed on us by foreigners. The meaning of this cannot be explained clearly in one sentence or two, and it may affect the formulation of some national policies and foreign policies in the future.

At least in this regard, Kyushu does not have to make too many compromises internationally, and Kyushu's backbone can be straighter.

The metal block that was transported here, with his continuous efforts day and night, was finally made into a rough blank in his hands, but more than two months had passed.

When he finished processing the last rough workpiece, a group of workers were dispatched from the aircraft manufacturing workshop, and with the help of these people, they began to package the workpieces.

Of course, these workers also wear powered exoskeletons. Without the help of equipment, it would be difficult for them to carry out their packing work.

When the workpieces were carefully packaged one by one, Li Zhenhua found an antique transportation company and asked them to transport them by land.

There are a total of 60 container-type semi-trailers, and these workpieces have been loaded from morning to evening. Each truck only contains a base and is not stacked on top at all. Some of them are so careful.

When the work has reached this stage, the preparation work is almost complete. Next, we have to enter the new company and carry out substantive assembly and other work.

While he has pushed the hardware to this point, he has not fallen far behind in running the software. It should be said that the progress of the software is faster than that of the hardware.

After he finished all the drawings, he began to work on the software manually from the inside out of his mind. Every day when he was in the office, he sat in front of the computer and started typing on the keyboard. He had already typed on the top mechanical keyboard in his hands. A broken one.

It can be seen how much work he has done in software. The software he has prepared now is still based on the software compiled under the English system. Who has allowed the English system to mature after so many years of development!

At this time, he still chose to use a relatively stable English system.

When he was compiling the operating software for the machining center, he also conducted some research on the Kyushu language.

Moreover, this research really allowed him to study something. The Kyushu language system will produce many different interpretations in terms of language logic. If it is put into machine language, it will be imprecise.

But it was this lack of rigor that made him discover some particularly interesting phenomena. He used the software programming language he developed based on the Kyushu language system to program a voice assistant, imitating the voice assistants on the market.

But this very mentally retarded language assistant often gives some answers based on Kyushu language logic, but often these answers are not the answers that a voice assistant should give.

This small discovery made him immediately curious. Driven by this curiosity, he conducted deeper research. Finally, he came to the conclusion that Kyushu language has unparalleled advantages in artificial intelligence in the future.

It is precisely because of the logic of Jiuzhou language that this unique phenomenon was created. When simulating in the virtual laboratory, he also added an automatic learning function to the intelligent assistant. Then under Li Zhenhua's attention, the intelligent assistant itself The program is that the learning function is becoming more and more complex.

His discovery was not told to anyone, and the intelligent assistant he programmed was not transferred from his mind to reality, because he was in awe of the unknown and was afraid that if it came to reality, some uncontrollable situation would occur. .

So he is very cautious in this regard. Maybe in the future when he really understands the artificial intelligence assistant he created, he will bring it into reality.

After the antique transportation company completed loading, Li Zhenhua also took these workers transferred from the aircraft workshop and set off for the new company in Daocheng. Of course, his travel mode was still protected by numerous bodyguards.

His car took the lead, and behind him was a convoy of sixty container semi-trailers. Under his leadership, the convoy drove onto the highway and headed straight towards the island city.

As for the convoy on the highway, no matter how fast Li Zhenhua's car opened the way, the trucks behind were always moving at a constant speed of 100 kilometers per hour. Even if they slowed down, they were all moving together.

In fact, Li Zhenhua didn't have to worry about any problems with the transportation fleet later. They were very experienced in transporting antiques, and the workpieces transported this time were carried out in the same way as antiques.

A White Tiger truck followed at the back of the transport convoy. The huge space inside was converted into a dispatch room, where the operation of the entire convoy could be seen.

Moreover, there are four drones flying above the convoy, monitoring the movement of the convoy at any time.

Especially after Kyushu Divine Beast developed high-density graphene batteries, this extremely high energy density battery in Kyushu has affected many aspects. The Kyushu Divine Beast White Tiger car they are driving now, as well as the Wuren flying in the sky. Humans and machines all use graphene batteries.

This allowed them to implement some transportation plans that were previously impossible or difficult to implement.

The transportation convoy was dispatched without any accidents along the way, and was transported to the island city in the safest and fastest way.

During their transportation process along the way, their return rate was extremely high. Whether it was a private car or a transport truck, they were all shocked by the transportation team composed of 60 vehicles. Everything was so orderly.

Some private cars feel nothing when overtaking, but then they are unable to overtake the convoy. The convoy is so long that some private cars even miss the exit.

After entering Daocheng, the people from Daocheng New Company were waiting at the highway entrance. After seeing Li Zhenhua and the others arriving, the work of guiding the way was handed over to the people here.

Li Zhenhua's convoy also broke away from the transport convoy and drove towards the new factory location on its own.

This is his first time coming to the new factory area in Daocheng. The processing and assembly will be carried out next. He wants to conduct an on-site inspection to see if the newly built factory buildings and other facilities here are in line with the factory design plan he gave before. .

If there are areas where the construction is not working well, it is better to mention it now and have it rectified. If you wait until the machining center is assembled and then rectify it, it will be too late.

In order to prevent earthquakes in the new factory, he designed several anti-seismic trenches for the factory, just to prevent vibrations from affecting the machining accuracy of the machining center. Renovating the factory building will inevitably produce vibrations and affect the accuracy, so if there is really something wrong The right place, now is the most suitable time for rectification.

Five vehicles arrived at the new factory area, and employees from the three companies who had known that he was coming, as well as managers from the engineering department, all came out to welcome him in. Then, accompanied by these people, they began to inspect the entire factory area.

Although he seemed to be wandering around the factory area, the real situation was that he had already measured the dimensions of the pair he wanted, and the measurements were clearly related to the design in his mind. Comparing the pictures one by one, he really found a lot of minor flaws.

But these small problems would not have any impact, so he did not mention them. They would cause some minor troubles to the users during subsequent use, but they were harmless.

If he pointed out these minor flaws, it would undoubtedly make those partners think that he was looking for trouble and nitpicking, so Li Zhenhua knew about it but did not point it out.

While he was making a circle around the factory, the transport convoys also came here under the leadership of the guides, but there was not enough space here for all the transport convoys to stop.

Fortunately, the location of the factory is very remote, and there are not many vehicles on the road leading to the factory. The fleet parked on the side of the road and then waited for the unloading time.

The driving of trucks actually produces a lot of vibrations. Fortunately, there is no machining center and other equipment at this time. After the machining center is officially put into use, such large transport vehicles will strictly follow the factory entry process.

Take shock-absorbing roads specially designed for transport trucks so that they have no impact on the machining center.

These things were all summed up by Li Zhenhua in the virtual laboratory after a long period of time and a lot of experiments. During this period, he made countless revisions to the factory design drawings.

It can be said that it is extremely strict, and all these things are done to prepare for the subsequent machining center, or to prepare for the machining accuracy of large workpieces.

This kind of rigorous preparation is not useless, picky, or just looking for faults. These are all reasonable. After seeing the design plan, the three partners all put away their contempt.

I also admire the Kyushu mythical beasts more and more!