Siheyuan: Break Yi Zhonghai’s leg at the beginning

In the blink of an eye, time passed day by day.

Under the leadership of Li Wangting, the special team also completed the processing of the parts required for the semi-automatic lathe.

Same as the previous continuous rolling mill.

This machine was also retrofitted with a machine that was about to be scrapped.

Under the leadership of Li Wangting, the workers and technicians of the special team are assembling the new lathe in an orderly manner.

"Everyone be careful, you must be careful, don't press your hands. Don't let go early, either.

When I say yes, everyone put it down slowly, don't crush the machine, otherwise we will give up all the work.

Li Wangting commanded everyone loudly.

Because this one is remodeled from an old lathe, there are still a lot of large parts on it.

The weight is very large.

A few young and strong young men went up together, and then they were lifted.

Deputy Director Li was also watching excitedly from the side.

The whole thing was left to Li Wangting to do, and he kept quiet and did not interfere.

Professional people do professional things.

He knew that he basically didn't know anything about these things, so he let others do it.

Anyway, he has a share of the credit for this thing to be built, and he can't go up to the layman to guide the insider.

Under the guidance of Li Wangting, the new semi-automatic lathe was completed quickly.

Although during this period of time, because everyone's craftsmanship is relatively low.

Many of the parts are going to pass.

But it was also produced smoothly.

Li Wangting made a final inspection.

After confirming that it was correct, the switch was pressed.

With the power supply turned on, the machine also operated slowly.

At first, because it was new, there were some slightly harsh sounds coming from the machine.

But as time passed, the lathe began to slowly break in.

The cacophony slowly faded away.

Watch this semi-automatic lathe work in action.

The workers of the special team also had technicians involved in the design of the fabrication.

All of them were excited, and many of them had tears in their eyes.

They didn't expect to actually build a semi-automatic lathe.

If this had been placed before, they would not have dared to think of it.

"Okay, don't get excited, you haven't tried the performance of this lathe yet.

Li Wangting interrupted everyone's excitement.

Although this batch of semi-automatic lathes has been manufactured, it has not yet been tested.

If the quality is poor, or if there are other problems, then they are wasting materials and delaying the project.

"Li Gong, I'll come!" a

second-class lathe worker took the initiative to stand up and ask for help.

After all, semi-automatic lathes are made by themselves.

Now that the finished product can finally be accepted, of course he has to go on the field himself.

"Okay, then be careful!" Li

Wangting instructed.

The worker then takes a rough ingot and prepares it for a simple process.

"Wait!"

the worker was about to process.

Li Wangting suddenly stopped him.

Then I went to the drawings in the back, found a difficult drawing and handed it over.

"Process this.

"Ah, Li Gong, I can't handle this. Looking

at the drawings in front of him, the worker was a little dumbfounded.

This part was previously assigned to the Level 4 lathe.

Although he knew that Li Wangting had passed through this period of time, his level had risen a lot.

But he is not so arrogant that he thinks that he can be qualified for this difficult part processing!

He is not capable of such high-intensity parts processing.

"If you want to do it, just do it!

Why? Don't you believe me?" Li

Wangting said with a deliberately straight face.

Seeing Li Wangting's expression, the worker knew that he couldn't hide.

I had to bite the bullet and start doing it.

However, as soon as he got started, he found that he had easily machined that part.

It's a bit slow though.

However, he was very satisfied to be able to process the parts he had made.

What does this mean?

It shows that his skills have also improved with the help of this new lathe

, and the other workers have a look of shock on their faces when they see his performance.

"I'll see, I'll see. A

fourth-class turner stepped forward and took the newly made part and measured it with a micrometer.

The findings are all within the margin of error.

This shocked him even more.

It was a phenomenon he had never encountered before.

In his cognition, if you want to make this kind of car, I am afraid you can't do it without seven or eight years of skill.

And it takes a long time to accumulate and learn.

"I'll try, I'll try, is it okay for Li Gong?" said

the master excitedly after seeing this part.

He wanted to see if this new lathe was so magical.

Li Wangting did not refuse his request, but just smiled and nodded.

And then he got to work.

This part is also being processed.

After getting his hands on it, he also discovered the magic of this lathe.

Parts that would have taken ten minutes to complete.

It only took him three minutes to process it.

The efficiency has been tripled.

"God, God!" the

surrounding workers were shocked.

"Li Gong, this is too good!" one

of the workers couldn't help but admire.

"Haha, it's okay.

"Then do we have any machines, can we also develop our special machines, we can work more easily in the future."

"Yes, yes, Li Gong, you can't be partial, you see that the lathe workers have it, do you also design ours." The

masters of several other types of work also chimed in.

They were envious of this new lathe when they designed and built it.

Now seeing that the finished product is so good, how can they not be impressed.

Although I don't know if Li Wangting will continue to design others, I have to fight for it.

"Rest assured, rest assured, come one by one.

Next, we will make a new workbench for fitters, which can improve the work efficiency of fitters. Hearing

Li Wangting's words, several fitter masters jumped up with joy.

They didn't expect Li Wangting to agree so readily.

"Then we will trouble Li Gong here. The

workers said to Li Wangting.

The main reason is that many things now need fitters to process manually.

Their work tasks are the heaviest, so developing a fitter's workbench first will greatly improve the efficiency later.

Seeing the disappointment on the faces of the masters of other types of work, Li Wangting also smiled and comforted him.

Everyone will have it in the future, it's just a matter of time.

That's what makes them happy, too.

"Okay, okay, in order to celebrate the success of today's new lathe, I asked the canteen to make some delicious food for us today, and everyone came together.

At this moment, Deputy Director Li came out at the right time and said.