My Life Simulator

() You can search for "My Life Simulator ( in Baidu to find the latest chapter!

Carrying the box out of the warehouse, there are tens of millions in his hand.

Lu Li smiled and shook his head. Jade carving is so extravagant. Any piece of material is very valuable.

If you make a wrong cut, it will hurt your heart.

Carrying the box back to the jade carving studio, Lu Li sat down in front of a jade carving processing equipment.

Carefully took out the Tianhuangshi from the box, and carefully installed it on the jade carving equipment, locked the soft fixture, and carefully fixed the jade.

You can't be careful! This thing...too expensive!

After the installation and fixation, Lu Li turned on the vacuum fan on the jade carving equipment and was ready to observe the jade again.

Rotate the fixture and change the angle continuously. Turn on the light, check it again, and confirm that there is no problem with my modeling design.

"Then... start work!"

Pressing the start button, the jade carving equipment immediately started to operate, and the rapidly spinning motor made a slight "humming" sound.

Reaching out and picking up the electric engraving needle, using thread engraving, gently engraved lines on the jade, depicting the shape composition.

The carving needle fell on the jade, and the dust jade shavings turned up. The dust suction fan instantly **** up the dust.

After the drawing is complete, the jade dust that has been cut off is at least one or two grams, and hundreds of thousands are gone!

Of course, once Lu Li finishes carving and makes a successful work, he can immediately double the value of this jade stone in its original material.

Turning off the engraving needle and changing the grinding head, Lu Li began to take the next step, peeling!

Except for the jade skin that is scheduled to be reserved, the jade skins on other parts must be peeled off to reveal the crystal clear texture of the jade.

Wipe the grinding head a little bit, a little bit of sanding, very light, very careful sanding, you must ensure that no material is wasted, and not too much cut.

After polishing, it is rough carving.

On the basis of the composition and the engraved lines, according to the natural characteristics of jade, the perfect shape is appropriately constructed.

I changed a needle and polished the surface of the jade a little bit to slowly build a three-dimensional shape.

When Lu Li used the engraving needle to carve on the original flawed black spot of Tian Huangshi, Lu Li suddenly gave his wrist a stop just after he placed the needle.

"Fuck!"

Even with Lu Li's "calmness", he couldn't help screaming.

Through the peeling jade skin, the light shone on the translucent jade, Lu Li saw that behind this flawed black spot, suddenly... a deep crack appeared.

The jade is cracked! It is still a crack hidden deep in the jade!

If a jade article has cracks inside, this fatal flaw will inevitably cause the value of the jade article to plummet.

This is the risk of the jade industry!

A piece of jade looks perfect on the surface. When it was processed, it was found cracked inside.

Such internal cracks are difficult to find during jade inspection and identification.

As a jade carving craftsman, I am most afraid of this situation. Jade is very brittle, and cracked jade is even more dangerous to carve. If you are not careful, it is possible to cause cracks to spread and the jade is completely broken.

Lu Li stopped, raised his head and shouted outside, "Mr. Wu, come on!"

"Teacher Lu, what's your order?"

Manager Wu rushed in.

"look by youself!"

Lu Li pointed to the jade clamped on the jade carving equipment, and Manager Chao Wu said, "There is a crack! An internal crack!"

"what?"

Manager Wu exclaimed and hurriedly moved up and looked down. Sure enough, I saw a slight line mark inside the jade, which was a crack.

"This this……"

Manager Wu looked helpless, "Teacher Lu, look...what about this...?"

A cracked jade sculpture, its value plummeted!

"There is a way, hollow out!"

Lu Li pointed his finger at the crack in the jade, and said to Manager Wu: "Through the hollowing process, the crack is integrated into the modeling composition to perfectly solve the crack problem. It's just that... there is a risk."

"What risk?"

Manager Wu is not a professional after all, and he is not very expert in specific operations.

"If there is a crack, it means that there is internal stress. It is still not sure whether the stress is completely eliminated. So... it is very likely that this jade will be broken."

Lu Li spread his hands together, "The jade is yours. It's up to you to decide whether to take this risk."

If the jade is broken, the loss will be heavy.

Although small pieces of jade are still valuable,...the value of small pieces of jade is not at the same level as the value of large pieces of jade.

"I... I'll make a call."

Manager Wu didn't dare to be the master, and quickly took out his mobile phone and dialed the number of the boss. "Mr. Jiang, Mr. Lu found a crack in the No. 3 Tian Huangshi during the process of carving. Yes! Internal crack. Teacher Lu meant ...You want to talk to Teacher Lu? Okay."

Manager Wu quickly handed the phone to Lu Li.

"Hello, Mr. Jiang."

Lu Li answered the call and greeted Mr. Jiang.

"Hello Junior Brother!"

Mr. Jiang smiled and said, "Little brother, when are you free, let's get together! I have cooperated with our company twice, and I haven't had time to meet you!"

"Uh... President Jiang is polite!"

Lu Li was taken aback for a moment, isn't he talking about jade now? What do you do?

"President Jiang, this Tian Huangshi..."

Lu Li was about to explain the situation, but before he finished speaking, Mr. Jiang interrupted him.

"You can figure it out!"

Mr. Jiang smiled, "The teacher appreciates your skills very much. I believe in the teacher's vision and your skills. Just do what you want."

"What if it breaks?"

Lu Li didn't dare to pack a ticket. There is no solution to the internal stress problem of jade.

"Haha! If it's broken, it's sold separately!"

Mr. Jiang smiled and said, "Even if it is broken, you can still make small sculptures with your skills!"

"That's OK!"

Lu Li smiled and nodded, "I'll try it!"

Since you believe me so, I have to show some real skills.

After hanging up the phone, Lu Li returned the phone to Manager Wu, "Mr. Jiang said, I will handle it, I will do my best!"

"Okay, trouble teacher Lu."

Manager Wu answered the call and nodded towards Lu Li, "Mr. Lu, I won't bother you anymore. I will go out first."

After Manager Wu left, Lu Li looked at the Tian Huangshi and the hidden crack, and let out a long sigh.

Mr. Jiang’s words are not only trust in me, but also in the army!

I'm not perfect to solve this problem, then I'm sorry for the praise Han Lao praised me!

Internal stress, right? Isn't it just a mechanics problem?

For Xueba, this is a question!

Lu Li turned around and walked to the desk next to him, took out paper and pen, drew a picture, calculated the direction of the stress, and calculated the magnitude of the stress.

The hardness and density of Tian Huangshi are all professional data, and it is not too complicated to calculate.

Lu Li quickly calculated the direction and magnitude of the stress. Of course, this is only an estimate.

Without destroying the structure and eliminating the internal stress of jade, the whole world has no choice but to leave it to nature and time.

However... the jade carving is destroying the internal structure and releasing internal stress.

After calculating it, Lu Li had a good idea.

Sitting on the jade carving equipment again, Lu Li picked up a long engraving needle, took a deep breath, aimed at the location of the crack, and slowly pressed it down.

The rapidly rotating needle pierced into the jade, bursting out a sour rubbing sound.

Carefully pressed down the engraved needle, the sharply rotating needle tip, the moment it touched the crack, Lu Li's heart was lifted.

Not broken!

The carving needle pierced the crack, and the jade was not broken!

call……

Lu Li let out a long sigh, with a smile on his face. Sure enough, my calculation was completely correct, and even if there was internal stress, it had already been released.

Next comes the test of craftsmanship!

Hollow jade carving, which is the most challenging carving technique in jade carving.

Lu Li replaced the thinnest and longest carving knife, and went deep from the hole, using the flaws and black spots on the Tianhuangshi as the origin, using the holes and cracks to carve out the shapes of underground rivers, waterfalls and deep pools.

Compared with the original landscape-shaped ornaments, the newly added hollow carving will definitely consume more materials, but... not only does it make up for the cracks, but it also shows more skill and originality.

This kind of hollow carving, which is similar to micro-carving, must be extremely careful. The hands must be very stable and the heart must be quiet. A little mistake will lead to abandonment.

Fortunately, Lu left and died!

The dexterity made Lu Li's hands very flexible and stable. Calmness made Lu Li's mentality very calm and composed, not in a hurry, not in a hurry.

It took a whole long time for Lu Li to finish this delicate hollow carving.

The next carving became very smooth.

Modern jade carving equipment is faster than traditional crafts, and the jade polishing speed is extremely fast. Hard jade, under a fast-rotating carving knife, is not much different from cutting wood.

At the end of the day, Lu Li had completed the main carving process, and only needed to be polished, leaving the author's inscription on it.

At dinner, Manager Wu brought a table of hearty meals.

No wine! Jade carving craftsmen are also not allowed to drink. It's easy to shake your hands when drinking, a shake... Millions, tens of millions, or even hundreds of millions are gone.

After dinner, Lu Li went into the jade carving studio again and continued to work.

The carving knife was replaced with a polishing head to polish the jade surface.

The jade that has just been carved looks gray and has no jewels. Only after the polishing is completed can it shine and shine.

The polishing head is dipped in polishing powder to finely grind the jade surface.

This process is to smooth the traces of the carving knife.

Wait until it is rounded, vacuum and clean, and perform a second polishing.

Change to a soft cowhide polishing head to polish every part of the jade carving. This process should not be rushed. It should be done slowly and polished a little bit without damaging the carving texture.

When the entire polishing process is completed, a brilliant jade carving work is completed.

The last step is to sign the inscription on the bottom of the jade carving.

Lu Li's inscription was signed in the form of a seal, with two majestic and ancient seal characters "Lu Li" on the bottom of the jade carving.

At this point, the jade carving work itself has been completed, but... it is also necessary to equip it with a pedestal.

This kind of jade ornaments generally use ebony carved bases.

The base material is naturally prepared in the company. Lu Li chose a piece of ebony of the right size and carried out wood carving.

The shape and carving of the pedestal must match the shape on the jade carving.

With Lu Li's craftsmanship, it is naturally easy to complete this wooden carving on the base.

After polishing and waxing the wooden carving base, Lu Li placed the jade carving in the indentation reserved on the base, tightly stitched tightly.

"Finish!"

Looking at the Tianhuangshi jade sculpture in front of him, Lu Li smiled and nodded.

...

the next day.

This jade sculpture by Lu Li has officially appeared.

"Ms. Lu, your work...has it been completed?"

Seeing this exquisite jade sculpture in front of him, Manager Wu was full of amazement, "Mr. Lu, you are so amazing! The crack is completely invisible, completely gone. Amazing skills! Amazing skills!"

Manager Wu quickly took out his cell phone and dialed Mr. Jiang’s number, “Mr. Jiang, Mr. Lu’s work is complete. Yes! The cracks are completely invisible, it’s amazing!”

Hanging up the phone, Manager Wu said to Lu Li, "Mr. Lu, Mr. Jiang will come over right away. He wants to appreciate your creation."

"welcome!"

Lu Li smiled. After the jade carving work is finished, it is normal for the boss to take a look at it in person.

After a while, a middle-aged man in his forties who looked extraordinary, walked into the jade carving workshop with a smile on his face.

"Mr. Jiang!"

Manager Wu hurried forward to say hello.

"Haha! Junior brother, I heard that you have finished your creation?"

President Jiang nodded to Manager Wu and walked towards Lu Li with a smile on his face.

"Good Mr. Jiang!"

Lu Li smiled and said hello.

"Brother! Call senior brother!"

Mr. Jiang smiled and said: "I am also a student of Old Han, and I am your senior brother after all. Calling Mr. Jiang, I will see you out!"

"Hello brother!"

Lu Li Congshan Ruliu quickly changed his mouth and called Senior Brother.

It's just that... Lu Li also knew that this kind of "senior brothers and younger brothers" was nothing more than a concept at all.

"Good! Good!"

Mr. Jiang smiled and nodded, then looked at the finished jade sculpture, "This jade sculpture...good craftsmanship~www.ltnovel.com~good craftsmanship, the junior is really superb! The internal crack is changed into a waterfall underground river? very good!"

"The crack was carved into waterfalls, underground rivers and cold pools by hollowing out."

Lu Li smiled, reached out and picked up a bottle of mineral water on the table, unscrewed the lid, filled the bottle with a little water, "Brother, please see, this is a real waterfall!"

With that, Lu Li poured half of the water into the cold pool on the jade carving.

Then...a stream of water gushed out, and a waterfall appeared. It trickles, endlessly. Coupled with this mountain-shaped jade sculpture, it is so beautiful that they contrast with each other.

"Good! Good! The mountains and rivers complement each other, the movement and the static are good. Moreover, this cap water circulates back and forth. This is... the principle of siphoning? Great!"

Mr. Jiang was full of admiration, "The craftsmanship of the younger brother... is amazing!"

In order to facilitate the next reading, you can click on the "Favorites" below to record the reading record of this time (Chapter 242), and you can see it next time you open the bookshelf!

Like "My Life Simulator", please recommend this book to your friends (QQ, blog, WeChat, etc.), thank you for your support! ! ()