I Lost It! It Turns out That the Anchor is Cultivating Immortals

Chapter 282: Kneeling

Chapter 282: Kneeling (Page 1 of 2)

0

55zw.5555zw 55zw 55zw

!This is the correct way to turn on the generator

"...Let's go, saying that Su Shen is going to be a magnet generator, how to build this metal shelf and what to do?"

"Don't ask, just ask... God Su is awesome!"

"....I think, will this....a pulley group looks kinda like...Look at Su Shenda not now.... just made.... two metals Pulley, have you installed it?"

"...lost, look, Su Shen took the pulley to the incinerator!"

At this moment, Su Mubai took the... ....mould.

Of course, Su Mubai plans to make some copper wires first, and complete the rotor of the magnet generator.... "I hope that last time... the gel has an absolute current.... effect..."

Su Mubai was also a little uncertain. He got up, walked into the shelter, and took out the leftovers from the last time the wolf ate...gel, and some picked from the tree....resin, put it on the shelf. One is made of black gold mold....in the container, this container....the structure is very simple, the shape looks very similar to the ancient.... wine glass, there are the kind of... water pouring.... card slot , about an inch or so.

In the middle near the bottom of the bowl....there is a small metal stick in the place, which can be stretched out....the copper wire passes through the metal stick after passing through the first card slot.

In this way, in the container....the resin and gel are melted to form....solution, then....automatically contaminate the copper wire, and after a certain distance cooling, the copper wire can be... solidification.

"Little Seven, come and turn this metal handle."

When everything was ready, Su Mubai called the little monkey over, let it sit in the incinerator, and turned the mold that was erected just now....

"Squeak..."

The little squirrel also ran over, a little puzzled.... Looking at this strange.... metal shelf, I can't figure out what it does.

"This....a tool that can extrude very thin....copper wires."

Su Mubai said casually,...In his hand, he was extruding and pulling it out of the mold at this time....Copper wire, passed through and placed in the middle of the incinerator...melt, Always: ten meters away....the place just stopped.

Because....copper and gold can only be easily extruded in disguised form at high temperature, and compressed into copper wire through the die, so the die....the shelf extends directly into the incinerator, through several gears and outside.. ..shake hand to connect.

The little monkey stands there, just follow the method that Su Mubai taught him just now. . . . . . . .

The live broadcast room.... the audience, it suddenly dawned on me that Su Mubai made.... not.... pulleys, but.... used to extrude copper wires and copper wires.... molds! Too awesome Now! With limited resources....resources, I'm stunned....to make a copper wire production line, although it is not....very....perfect, but to make....copper wire, it can definitely be Use it in a magnet generator.

Only....now the only....worry, just....that kind of...the protective layer made of resin and gel....can it have the effect of isolating the current....after all Magnet generator....through kinetic energy, drive the rotor....rotate, let the copper wire do cutting magnetic field....move in the magnetic field, and generate current.

If this solution doesn't have any....isolating current....effect, then making these....copper wires is also....wasting time.

Just like directly stuffing a large piece of ++ metal, there is basically no difference.... <The wrapping... is not bad, but the specific effect can only be known after the installation is complete."

Su Mubai looked at the copper wire in his hand. The thickness was the same as.... as expected.... It was only about two millimeters. The color seemed to be more.... shiny than ordinary... .

Gold is added after all.

And on the outside of this copper wire...., there is a thin.... transparent layer, which is completely solidified to the touch, like.... a kind of transparent.... paint.

Su Mubai pulled the copper wire, bent it a few times, and wrapped it around the copper wire... The transparent layer also bent along with the copper wire and did not break.

That is to say....that this kind of mixed resin and gel...melt, after drying....the texture is very similar to copper wire, not...that kind of...very brittle... .state, mixed with a hint of flexibility, and transparent....paint is somewhat similar.

Afterwards, Su Mubai left a large piece of... copper wire behind the rotor.... around the card slot, made the... copper wire, and wound it along the card slot, grumbling, The little monkey's hands....waving hands and turning continuously, those...heated in an incinerator....alloy, slowly....extruded by the die wheel, forming a very thin ....copper wire.

Time passed quickly, like a white horse passing through a gap. Three hours passed in a blink of an eye. 3 In Su Mubai's hand... the rotor slot is now wrapped with resin melt... copper wire.

"Little Jin, you can stop now."

Su Mubai stopped the little monkey, and cut off the copper wire in his hand, and put it together with the one that was left before, and fixed it on the metal shaft with resin melt.

There, a cube.... water chestnut card slot is also created, and there are three 3 dark gold.... metal rings.

First.... first metal ring, touching metal+.

+.

The shaft....place, Su Mubai separates it with resin melt to prevent the current from passing through the metal shaft and passing to its....place.

Then....two metal rings, like the first metal ring, are separated by resin solution, however, near the middle.... There is a small hole in the metal ring, which can be passed through the copper wire and connected near the Outside....on the metal ring.

In this way, the two wires are glued and fixed on the two metal rings respectively, and there will be no contact, which will cause the copper wires to be burned after the power is turned on.

And the two dark gold.... metal rings, there are two concave.... card slots, which can be used to clamp the generator cover.... brushes.

After all, there is no wire connected, even if the current is generated in the copper wire, there is no way to guide and use it.

Like the rotor....the wiring ring, the magnet generator....the back cover, the two connecting metal rings....the brushes are also separated from the generator by the resin solution....the shell, pop Dah! Su Mubai took the generator.... the rotor, walked over to the magnet, passed through the middle of the magnet.... area, and got stuck at the bearing.

After putting the lid on, Su Mubai turned the rotor with his hand. Compared to when he hadn't wound the copper wire.... it was significantly heavier, as if something inside was preventing the rotor from rotating.

This point, pour...and....previously made....small generators, at the same time....copper wire cuts the magnetic field to form... .. Reaction force. This chapter is not over, click on the next page to continue reading.

Chapter 283: The Bunker

Chapter 283: The Bunker (Page 1 / 2)

0

5555zw.5555zw 55zw 55zw

!This Nima must be a star sucker, right?