God-level Big Mine Owner

Welcome, please remember the address of this site: Read on your mobile phone, so that you can read the latest chapters of the novel "God-level Mine Master" at any time...

Hashimoto Goro!

Fuso people!

The scene of the last car accident occurred in Wang Xudong's mind. The car running through the red light crashed into a normal car.

Fortunately, Tiger Lin was very skilled and reacted fast enough. Otherwise, Wang Xudong himself might be hit. At the beginning, Wang Xudong kindly called the police, called an ambulance for them, and briefly explained the situation to the traffic police.

Where did I know that the Fuso man, that is, Hashimoto Goro, didn't appreciate it, and warned Wang Xudong with his eyes, which made Wang Xudong very unhappy.

After an order, Lin Hu and He Xiaoyun launched an investigation together, and soon these materials were in front of Wang Xudong, Wang Xudong looked one by one.

After reading it, a slight sneer appeared at the corner of his mouth. To clean up a Fuso like Hashimoto Goro, there is no need for Wang Xudong to go out in person, a phone call is enough.

So Wang Xudong dialed an overseas phone call to Hiromasa Ando of the Itanium consortium. In the eyes of outsiders, this Itanium consortium is currently the most famous consortium in Fusang. In fact, its head Hiromasa Ando completely obeys Wang Xudong.

After the call, Wang Xudong briefly explained the situation, and Itanium Guangzheng knew exactly what to do.

What goes around comes around.

This Hashimoto Goro is not a good thing either. During his time as the representative of their machine tool company in China, he was often domineering, and many people were unhappy with him.

Like Liu Fudong of Jixiang Automobile Group, his face was almost blue with anger at the beginning, and a pencil was abruptly broken.

Soon after Wang Xudong made this call, the product launch conference of Shanhe Machine Tool Equipment Co., Ltd. was also about to start at Dahan International Hotel in Lucheng.

The huge hall is very noisy, because everyone can't be quiet!

The guests participating in this product launch will be enthusiastically guided by the staff as soon as they enter the lobby, sit in the designated position, and then send a beautiful introduction material.

High-definition printing, pictures and texts, not only the introduction of Sunward Machine Tool Equipment Co., Ltd., such as when it was established, how much registered capital, how many employees, how big the factory area and so on.

This is not the main thing, the key is that the large length of this information is the introduction of a large 5-axis CNC machining center.

If there are several color pictures of this machine tool, such as the introduction of performance and parameters, etc., they are very detailed. The guests who came to participate in this conference were not the customers who needed this kind of machine tools, or the heads of related machinery manufacturing companies.

In other words, these guests are not laymen, and they know some basic common sense of CNC machine tools. After everyone got this introduction, they sat in their own place and watched it before the product launch conference officially started.

This look is incredible, it's no wonder the whole hall can be quiet!

"This is not a decimal point printed wrong, right? The accuracy is so high!"

"This is going against the rhythm!"

"..."

From time to time, there is a sound of sucking in cold air. Seeing this CNC machine tool in the introduction, everyone knows that this is definitely the world's top, best, and most outstanding 5-axis CNC machining center.

Of course, the premise is that there is no bragging.

Will you brag?

Certainly not, because Sunward Machine Tool Equipment Co., Ltd. is a wholly-owned subsidiary of Sunward Heavy Industry Group. The brand of Sunward Heavy Industry is there. People will definitely not brag.

"It's amazing, I didn't think that our country can actually produce such an excellent CNC machining center!"

This is a gray-haired old professor who specializes in machine tool research. He asked himself that he couldn't develop such an advanced machine tool. His eyes were full of excitement.

It is estimated that this is the common dream of generations of Huaxia, and it is also the goal of this old professor and others. I did not think that in their lifetime, they can see the most advanced CNC machine in the world. machine tool.

Sure enough, Liu Fudong came in person, with his assistant and a vice president. The three of them were sitting in the guest area, and each of them was looking at them excitedly.

Liu Fudong found that his hand was shaking a little while holding this introduction material, and he quickly took a deep breath and said happily: "Great, it is also a five-axis CNC machining center. It can be regarded as scum."

"President, we are blessed. With such a good CNC machining center, the key parts needed for our new model will definitely be processed."

This is for sure, this is the best 5-axis CNC machining center in the world, even if it is military-grade, it is not as good as this machine tool.

nine in the morning.

Amid the click of the spotlight, He Yehui and other senior executives of Shanhe Heavy Industry Group and several senior executives of Shanhe Machine Tool Equipment Co., Ltd. walked into the hall along the red carpet.

The product launch is hosted by Gao Yiyong!

First, He Yehui delivered a speech, warmly welcome everyone to participate in this product launch, and then Gao Yiyong personally introduced this product.

The introduction materials have been prepared long ago. Using the projector, it is very clear. Gao Yiyong seems to be a little nervous, no, it should be said that he is a little excited, and introduces this CNC machine tool with a little trembling tone.

One or two minutes later, Gao Yiyong gradually entered the state, and his tone became much calmer. The originally noisy hall gradually quieted down, but occasionally there was a sound of cold breathing.

……..

In the office.

Wang Xudong was watching the live broadcast of Lucheng TV. The situation at the whole press conference was clearly seen, and he thought with satisfaction, yes, really good.

The product is so good, the conference is very successful.

After the introduction of the product, the highlight begins. Customers who need this machine tool will place an order with Sunward Machine Tool Equipment Co., Ltd.

Of course, the signing of the order will not be broadcast live.

Wang Xudong doesn't need to watch the live broadcast anymore, just wait for He Yehui's report.

Lin Yunwen also received the invitation letter, but he was very busy and did not have time to participate in this product launch, but was busy with the production of his engine.

The problem is very difficult. He personally guided him to process the parts with the other five-axis machining centers with slightly lower performance. The processing quality was also not ideal.

Lin Yunwen frowned. It is impossible for him to stay in this factory all the time. He still needs to rush to the military to participate in the production of that large engine, which is the power of the military's largest transport aircraft.

Before leaving, Lin Yunwen shook the hand of the chief engineer of the processing plant and slowly said, "Old Xiao, the problem is left to you. I originally wanted to change the design and lower the design requirements, but you also know that this way The overall performance of the engine will be affected, and you must ensure the quality of the parts."

The chief engineer felt very embarrassed: "The only way to solve the problem of processing quality is to buy a few high-precision five-axis CNC machining centers, but this is not easy!"

If you put it in the past, this is really not easy. To exaggerate it, it can be said to be as difficult as the sky. Now, this is not too difficult.

Sunward Machine Tool Equipment Co., Ltd. has held a product launch conference and will launch the world's best five-axis CNC machining center and begin accepting orders.

"Mr. Xiao, look at what I sent in your phone."

When Mr. Xiao saw his cell phone ringing, he took a look and found that it was a technical director of his own. The factory also received an invitation letter, but they only sent the technical director to participate.

Seeing that his own technical director's tone was so hurried, he seemed to be a little bit excited, Mr. Xiao immediately opened the information he received in his phone, and then looked through it.

what!

This is impossible!

Lin Yunwen noticed the change in Mr. Xiao's expression, and asked with concern: "Old Xiao, what's wrong, what happened?"

Mr. Xiao's expression was obviously excited, and he said loudly: "Lao Lin, all problems have been solved, and Shanhe Machine Tool Equipment Co., Ltd. has launched the world's best and top five-axis CNC machining center!"

There is such a thing!

Lin Yunwen also remembered immediately. He also received the invitation a few days ago, but he was too busy at work and didn't go there. No matter what he thought, he launched the best and most outstanding processing center in the world.

Lin Yunwen almost grabbed Mr. Xiao’s mobile phone, and immediately looked at the information on the mobile phone. As he looked through it, he said excitedly: "It's incredible, great!"

With such a good CNC machine tool, he can't produce high-quality parts. Lin Yunwen has no problem with the mass production of this aero engine. No wonder he is so happy and even a little excited.

...

The second day of the product launch.

Wang Xudong went to Xudong Mining Group again and appeared in Xudong Mining Group for two consecutive days. This is relatively rare.

Went to his office again today. Wang Xudong is ready to wait for the arrival of He Yehui. Yesterday’s product launch was so successful~www.readwn.com~ Wang Xudong guessed in his mind that he probably won a lot of orders.

Wang Xudong made a cup of tea by himself, and used the best tea, which contained the meaning of celebration. He Yehui's coming over will bring good news, which is for sure.

Take a small sip, it seems that the taste of this tea is much better than usual. This is because of the mood. If you are in a good mood, it will be different when you drink it.

After drinking a few sips of tea, Wang Xudong was thinking in his heart that Shanhe Machine Tool Equipment Co., Ltd. was an instant hit, from obscurity to fame.

Wang Xudong has seen a lot of news about reporting this product launch on the Internet, and this five-axis CNC machine tool is so advanced that it won’t work if it is not popular.

There was a knock on the door outside the office. Wang Xudong thought it was He Yehui who had arrived, and went to open the door enthusiastically. He didn't think about it, it was not He Yehui at all.

……..

Send the second more!

That's all for today's update, thank you everyone! 17046