Beginning From Transformers

You can search for “Beginning From Transformers” in 100 degrees to find the latest chapter!

Sun Cheng has been in a good mood recently. Soon after the hurricane ended, he disappeared briefly for another 2 days in the name of a business trip.

Returning to [Isla Nublar], he also brought Safeguard to the island together, and supervised the robot to start the reconstruction of the No. 3 base.

With the supervision of Safeguard, Sun Cheng did not stay much on the island and quickly returned to Xia Country.

After such a long delay, the development layout, which was originally in a semi-stagnation in reality, has also begun to enter the fast lane again.

With the 【Intelligent Machinery Lab】 officially put into use, the cooperation between him and the Xia Country government has entered a honeymoon period.

[Future Machinery Technology Co., Ltd.] It has been established for more than 2 months. Before the graduation period, Sun Cheng recruited a batch of fresh graduates with a high degree of diploma from major universities in Nandu.

The level 2 defense military production license he wanted was also taken over by Liu Nianyuan Lieutenant Colonel with two sets of half-covered mechanical exoskeleton armor.

Together, there were more than 20 retired military personnel who had been specially trained to be able to perform security work in key national defense scientific research units.

Like [Intelligent Machinery Lab], the office space of [Future Machinery Technology Co., Ltd.] was also arranged in Ningjiang District.

Because of the special care from the equipment department, they also acquired a piece of land of 47 acres in the Core Zone of the Ningjiang High-tech Park for the construction of a special factory for the production of machinery exoskeleton armor.

The 47 acres of land is indeed not worth mentioning for a large production base of several thousand acres.

But for a factory that specializes in the production of exoskeleton armor for the military, it was barely enough.

The most important thing is that most of the nearby factories belong to several domestic military and defense companies, and their security is worthy of trust.

The exoskeleton special factory was started by a state-owned construction contractor because the scale is not large. It is estimated that the first steel structure workshop will be completed in a month and a half at most.

It can be seen that the country is a bit anxious, but Sun Cheng can understand it.

The political situation in Central Asia has been turbulent since the beginning of the year. As the influence of the great powers, everyone understands the reason of retreating without advancing.

Moreover, with the return to the Asia-Pacific strategy in the past few years, Lao Mei has also suffocated a lot of bad water to stir up the flames around Xia Country, and even personally entered the battlefield.

Therefore, the country’s pressure on armaments is increasing day by day.

Sun Cheng produced a total of 4 sets of semi-covered mechanical exoskeleton armor, of which 2 sets were tested by the equipment department.

The other 2 sets were put in the [Intelligent Machinery Lab] that he just put into use.

And he himself has recently stayed here at [Intelligent Machinery Lab] to help test and try to continue to improve the low rank version of the semi-overlay mechanical exoskeleton armor from his original rough liver.

The mechanical exoskeleton type armor, the products designed by various countries are still very junior, including Sun Cheng, which is almost the same. They are all composed of the main body, the leg unit and the double arm unit.

The main body of Sun Cheng’s mechanical exoskeleton armor is the part that is worn on the front chest and the back. Among them, there are 3 to 5 steel shafts with different horizontal and vertical lengths plus some soft nylon straps on the front chest, mostly fixed devices; It consists of a penetrating mechanical spine, several steel shafts and several nylon straps.

The mechanical spine can be said to be the core of this mechanical exoskeleton armor. The two lithium-ion batteries are fixed somewhere in the spine. In addition, there are extremely complicated circuits and drive systems.

In addition, there are three bayonet mounts on the mechanical spine, two of which are located in the upper half of the back, and one is located in the caudal vertebrae. The two bayonet mounts on the back can add some equipment when needed, such as large external buckles Equipment kits, weapon units, etc., and the bayonet at the tail spine is where the outbound control package is.

The control bag is placed on the waist area, so that the soldiers wearing this set of exoskeleton armor control, switch on and off the drive system and other armor functions.

The main component of the leg unit is a steel shaft with nylon band, and there are 4 small push nozzles at the foot position.

The main body of the double-arm unit is also a few steel shafts with nylon straps, and two bayonet are attached to the left and right arms, and the hand, respectively, for the use of weapon units.

Because it is a simplified version of the latest generation of HULC mechanical exoskeleton from [Berkeley Bionic Technology Company], this model has not yet been finalized, and it is still using the “experiment 1” name of the half-covered mechanical exoskeleton armor. The structure is actually very simple.

Even if its all-electric drive system and 2 lithium-air batteries are removed, the remaining manufacturing cost is even less than 10000 Xia Yuan.

“I’m ready!”

After the “Trial 1 Type” was manufactured, Sun Cheng had conducted several simple tests himself and determined that there was no problem before giving 2 of them to Liu Nianyuan.

However, after the [Intelligent Machinery Lab] started operation, in addition to a few fixed research subjects, it continued to improve and improve the “experiment 1” class uniforms prompting mechanical exoskeleton armor, which became one of them.

not at all Interfering with other research projects in the laboratory, Sun Cheng was temporarily idle, and a 27-person research team was personally selected.

Almost all of the team is composed of recent college students from several key science and engineering colleges in Nandu, but he still dug two docter students from the machinery manufacturing and automation profession under Professor Chen Yuan.

A group of people recently played 2 sets of ‘experiment 1’ mechanical exoskeleton armor, and they were very happy.

“Experiment Type 1 mechanical exoskeleton armor, the 17th test, the wearer-Wang Jun, the inspector-Liu Yiming, Liu Jun! Ready to start …”

Sun Cheng stood quietly, watching a team of youngsters of his age, where he helped wear a dozen kg of mechanical exoskeleton armor on a researcher for the 17th test.

The wearer tested at this time was a youngster named Wang Jun. He had just graduated from college because he was wearing mechanical exoskeleton armor for the first time.

2 Foot on the chassis of the mechanical leg, the back is attached to the mechanical spine, the hands are attached to the mechanical arm, the person who helps the wearer immediately wears and fixes the mechanical glove to Wang Jun, and the buckle at the joint is interlocked The rattling sounds kept coming.

Not far away, 4 cameras were facing them, meticulously recording all the pictures.

“Wear it, let’s get up and do a simple activity first!”

“it is good!”

Wang Jun resisted the excitement, gestured OK to the other researchers watching him, and immediately lowered his head to open the control package around his waist.

The control keys in the control package are very simple, with only 3 different buttons for start, disable, and full drive.

Considering that the palm after wearing the mechanical exoskeleton is not easy to operate, the distance between each button is very large.

Wang Jun has received simple training before wearing it, and has seen other researchers test in the past few days, which is barely experienced.

Therefore, after pressing the start button in the control bag, the control bag was covered again, and with the buzzing mechanical light sound, his body quickly stood upright.

“First do a few simple moves!”

Someone reminded next.

“it is good!”

Wang Jun was complied, immediately moved the start finger, and turned his wrist, and the finger of the Iron Fist glove also made a perfect synchronous maneuver. I saw other researchers around me who had not worn mechanical exoskeleton armor for testing. He clenched his fists tightly, his eyes flashing.