Armor Frenzy

There are many people and great strength. After a dozen people are busy for a while, the preparations for dismantling the functional cabin are completed, and the functional cabin can be released only after the equipment is in place.

Ye Han stood on the top of the spacecraft, standing high and looking far, and after a while, he found two strange-looking lunar rovers in the distance-all vehicles driving on the surface of the moon can be called lunar rovers, no matter how long they are. what is it like.

When I got closer, I found out that it was two vehicles with sturdy robotic arms. This kind of vehicle has no outer casing, and the driver sits on the chassis to operate the vehicle.

The technology for making the outer shell is not complicated, but this thing is produced on earth, and the outer shell will add a lot of load to the spacecraft. For the aerospace engineering of the Keke plan, this unnecessary load must be reduced.

It was found that Ye Han and others on the top of the spacecraft, the astronauts in the car stretched out their arms and waved hard when they were far away.

Ye Han also waved his hand as a greeting.

"Hello, I'm Gao Kai." A voice sounded on the radio.

"I'm Hu Liang." Another voice said.

"I'm Duan Zhiyang No. 1, I'll represent everyone for the time being... Let's meet and introduce again. Let's dismantle the functional cabin first." Duan Zhiyang said.

Everyone's real face is covered under the mask of the spacesuit, and there is no difference between introducing and not introducing.

The two Gao Hu agreed very much, and immediately drove the two cars to the vicinity of the spacecraft, and inserted the end of the robotic arm into the locking structure outside the function cabin.

In order to maintain the balance of the spacecraft, two vehicles are located on both sides of the spacecraft, and two symmetrical functional cabins are fixed respectively.

"Remove!" Duan Zhiyang roared, Ye Han and others on the spacecraft unlocked the locking structure together, the two functional cabins were separated from the main body of the spacecraft at the same time, and the mechanical arm lifted the functional cabin steadily.

A few people jumped on the lunar rover and followed the rover holding the functional module to the distance. After a while, the lunar rover drove into a small flat plain and placed the functional module in the pre-determined position.

Several people in the car jumped down immediately, and according to the contact procedures during ground training, they found the electrical equipment placed nearby, and used cables to introduce electricity into the functional cabin.

The temperature difference between day and night on the lunar surface is extremely large. In order to avoid damage to the cables due to the severe temperature difference, the cables must be buried underground. Therefore, the progress of the project is not very fast. Location.

However, not all the astronauts followed. Four people, including Ye Han, remained on the spacecraft. The astronauts were divided into two places to perform their respective tasks.

Ye Han and others did not want to live in the spacecraft, but to dismantle the retro rocket of the spacecraft and collect the remaining fuel together.

The dismantled retro rocket cannot be wasted. After the fuel tank is emptied, the valve that has been prepared is installed, which is a good gas cylinder, which can store oxygen or any gas.

This thing is useless on Earth, but on the moon without an atmosphere, gas cylinders are absolutely indispensable and important storage equipment.

At the beginning of its design, Kongtian-1 adopted the principle of multiple uses for one thing. There are many designs similar to fuel tanks, and even Kongtian-1 itself is no exception.

In addition to the retro rocket, there are also four small rockets for liftoff on the Kongtian-1. If necessary, you can take the Kongtian-1 to leave the moon. From today, the Kongtian-1 will be the last guarantee for the safety of the astronauts stationed on the moon. , the spacecraft must be frequently serviced, kept launchable at all times, and must be stocked with sufficient food and water at all times.

The construction of the placement area is also continuing. After the first functional cabin was connected to the power supply, Duan Zhiyang opened the cassette placed outside the cabin and pressed the button to activate the functional cabin.

The two sides of the functional cabin are opened immediately, the inflatable structure inside slowly expands, and soon it becomes a hemispherical oversized tent. The two hemispherical tents are connected to the functional cabin, like an oversized half-buried in the soil. number dumbbells.

The material used to make the tent is a kind of memory metal. After it is fully expanded, the space inside each tent has hundreds of square meters and is divided into upper and lower layers.

The tent deployment was also just the beginning. The unmanned construction machinery that had been sent to the lunar surface immediately began to work according to the program. A thick layer of lunar soil was accumulated on the outer layer of the tent, and the hemispherical tent was buried under the lunar soil.

The thick lunar soil can effectively block radiation, resist external temperature changes, and maintain the existing indoor environment. This technology comes from the European Space Agency and is also the result of in-depth cooperation.

The cooperation between China and Europe is not as pleasant as it seems on the surface. Many technologies can be exchanged. However, the EU is a multinational alliance. Even if some member states are hostile to China, at least some member states are willing to cooperate with China. Dealing with Europeans is much easier than dealing with Americans.

Due to the full preparation, the first functional cabin was buried by the thick lunar soil in only half an hour, and the interior began to be inflated and pressurized, and other functional cabins will be launched one after another.

Fourteen astronauts, including the two Gao Hu, called the six functional modules the first phase of the Lunar Community.

From what everyone knows, it won't be long before the second phase of the project will start as scheduled.

However, deploying the functional cabin is still the first step, and then various living facilities or other equipment must be placed in appropriate places.

All those sent to the moon must follow the principle of lightness and ease of use. For example, the seats and beds in the living cabins are all inflatable beds made of light and strong materials. These things look thin, but even in the standard gravity environment of the earth下~www.readwn.com~ can also withstand the weight of an adult, not to mention the gravity of the moon, so that everyone has to release some of the gas in the inflatable furniture to make the pavement soft and comfortable. paste.

Tables, shelves and other similar platforms are made of thin and light alloys, and all of them are standardized in design to reduce weight and volume as much as possible. By combining these parts, you can get all kinds of necessary furniture.

In addition, there are sanitary ware, water supply lines, sewage systems, life-saving equipment, etc., all of which require the astronauts to assemble them step by step, and it will take at least a few days to complete the entire project.

Fortunately, only the living cabin is so complicated, and the other functional cabins have special purposes, and the internal facilities are much less than that of the functional cabins.

For example, the soilless cultivation cabin, where the only function is to use soilless cultivation technology to grow vegetables and study the impact of the lunar environment on plants.

If plants on Earth can grow normally on the moon, it is very likely that in the future, a farm dedicated to growing food will be established in the underground base, so that the lunar base will no longer rely on the earth for food, achieve true self-sufficiency, and even feed the earth like a lily. Search this site for \"Biquge CM\" or enter the URL:.