Arcane Lord

Ever since the Yue Xilan family came, there have been elves coming to Savile Town, but at this time, there is no need for Xia Duo and Niya to come forward in person.

Through the Orepus Patriarch of the Silver Leaf Clan, Xia Duo inquired from the Moon Xilan's house that a high elf mage appeared on the side of Conifera, and all the elf elite wizards similar to human high-level wizards bought.

In other words, the only thing left was the level of an intermediate mage, so Xia Duo chose to entrust the Silver Leaf Family to receive the elf refugees. Of course, the reception was only the last step, mainly to persuade him to leave.

It is not to persuade them to return to Comanso, this is not realistic. Advise them to stay at the supply point east of Savile with peace of mind. Hello, me, everyone.

Although the arrival of the elves is a bunch of refugees, this busy and chaotic atmosphere also dilutes Xia Duo's worry about drow and dragon disaster.

Perhaps it was because there were so many elves as the back cushion, perhaps because the threat did not come day by day. After a long time, the feeling faded. Anyway, Xia Duo has indeed been a lot easier in the past two days.

It is no longer like before, almost 24 hours ready to respond to all kinds of disturbances at any time. The days that should be lived are still to be lived, and they must be lived normally.

...

The Tower of Time, in a workshop.

Xia Duo carefully assembled a neatly shaped magic device on the experimental platform. Although he moved very cautiously, his mentality was very relaxed. The magic scroll printing machine was far less difficult to manufacture than flying swords.

Even Feijian has been made, this magic scroll printing machine is no longer a problem.

The main body of this guy is a rectangular table, almost half a palm high. One side of the table is a long and narrow rectangular ink cartridge, which is divided into three grids to fit three different inks.

In addition, this ink cartridge can also be removed and replaced with other spare ink cartridges. In the design concept, Xia Duo referred to the ink cartridges of printers on the earth.

Of course, the different shapes are also certain, he just focuses on how convenient and how to come, practicality is the main, and there is no excessive design in appearance.

As for the inside of the table, there are the Mithril components and the energy core. In order to facilitate the inspection and maintenance, Xia Duo did not package them. Anyway, they are used by themselves. They can be repaired at any time.

Except for the Mithril components and the energy core, the other materials of the printing press are not related to the core functions of the printing press, so there is nothing to pay attention to. Xia Duo chose the most common iron.

If it is not for metal shaping, it is more convenient, and its practical wood can save costs.

After closing the last buckle, Xia Duo applied a little force on her hand to make sure that the whole is stable, and a laboratory version of the magic scroll printing machine was completed.

As for linking the magic net, it has been linked after installing the Mithril components and the energy core.

...

Next, Xia Duo was ready to actually use it.

He first took out a stack of parchment paper from his pocket and placed it in the six grooves on the printing table in turn, almost filling the grooves.

At present, automatic paper change either involves mechanical structure or requires additional magic design. While the former Xia Duo is not good at it, the latter requires a lot of time to study.

It can not be achieved in a short time, and the current printing press can greatly reduce the time consumption of the magic scroll production process, and the addition of an automatic paper changer will greatly improve the efficiency.

After installing the "printing paper", Xia Duo began to add ink to the "cartridge". This time he was going to print a 3-ring fireball scroll, which needed [Sand Crystal Graphite Water].

In addition to the “sandstone” in the name, this ink also contains a large proportion of ruby ​​powder. A small bottle of 200 gold coins is sold outside, and one bottle can draw almost two fireball scrolls.

For the Tower of Time, this kind of consumables is of course to save money by purchasing materials and preparing them by yourself, and when the Tower of Time members are settled, it is less than 200 bottles.

But this kind of ink is still very expensive anyway, and Xia Duo poured 10 bottles into a grid of the long ink cartridge at a time, and it was almost full.

It can be seen from this that he is still full of confidence in the availability of this printing press.

Then Chateau took out something similar to a 3.5-inch floppy disk on the earth and inserted it into a card slot on the side of the printer. Without this, the person who started the printer could only control the printing content.

This thing has not appeared in [Projection Plane·Arcane Empire], where the printing workers are at least official mages, and the printing presses and communication arrays are linked together to produce an effect similar to "cloud printing".

This is incomparable to Chateau. He does not have a large number of mage workers to serve him, and there is no communication array covering the whole country as an external data source. All he can think of is a physical "plug-in".

The core of the printer is [transcription]. This 1-level spell can print out any content provided by the caster, but the spell itself also has a certain degree of openness, turning "caster custom input" into "entity plug-in input" There is no threshold~www.ltnovel.com~ The floppy-like thing that Xia Duo took out, inside the iron shell, is actually a Mithril component. When he inserts it into the printer, it is similar to performing a spell Book bridging experiment.

It's just that the bridge experiment is an equivalent replacement, and here, only a part of the structure is added to the core Mithril component of the printing press.

The effect of increasing this part of the structure is reflected in the magic effect, which is to directly print the arcane geometric figure of [Fireball] on paper.

At present, Xia Duo has prepared several external printing plug-ins for spells. If you want to change the printed content, just change it and adjust the corresponding ink cartridge.

Not the most convenient method in theory, but in a short time, Xia Duo can only do this.

...

Everything was prepared, and Xia Duo started the printing press. There was no noise that might appear from printers on the earth. It was just a flash of magical aura. The parchment on the six printing positions of the printing table had already appeared complex as expected. , Precision graphics.

"It's semi-automatic!" Xia Duo spit out slightly.

This printer needs to be started to print. Of course, it can also be designed for continuous printing, but it also needs the function of automatic paper change for matching. For the time being, there is no need for such a tall automatic printing machine.

Just now this one, just the blink of an eye from Xia Duo, 6 copies of [Quasi Magic Scroll] appeared.

Except for the last [Link Magic Net] machine that cannot be replaced, other pre-steps that originally required the caster to spend a lot of time were completed by the printing press in an instant.

This is just a semi-automatic printing machine, if it is fully automatic, even the machine can replace the caster to link the magic net for the magic scroll, that kind of prospect is simply unimaginable.

...