The black tech madman who saves the world

Chapter 76 Chapter 6 Origin Robot Arm

Chapter 76 Section 6 Origin Manipulator (24)

In Chen Mengchuan's office.

"Achen, help me connect Toni, Brother Xu, and Chen Xiaoyun." Chen Mengchuan said to the screen.

"Good father." Ah Chen swiped the screen, and it was divided into 3 equal parts in an instant, and Toni, Xu Shuwei, and Chen Xiaoyun appeared on the screen in an instant.

Seeing the appearance of the screen, several people also looked at the camera and greeted each other.

"What's the matter? Mengchuan." Xu Shuwei asked.

Chen Mengchuan said directly: "The current production efficiency of Tianzhi Electronics Factory is still not good, and it must be improved. Achen has no way to achieve more efficient optimization alone. The three of you work together, starting from production scheduling, raw material production rhythm, and packaging. From this perspective, think about a new plan to increase the production capacity of the current production line of Tianzhi Electronics Factory."

"Design a new production line improvement plan to improve the efficiency of the production line. Work out a maximum theoretical production volume, and then optimize towards this production volume." Chen Mengchuan added.

Toni thought for a while, then nodded: "Okay. Chen, make a statistics of the current production data, equipment data, and labor data of all the production lines of Tianzhi Electronics Factory, and send them to us. There is also a design diagram of the production process of the production line. , after sorting, send it to us."

"Okay, Papa Toni." Ah Chen nodded with a smile and agreed.

"Xiaoyun, I remember you and Chen calculated the limit output of a production line before?" Xu Shuwei asked Chen Xiaoyun on the screen.

"Achen, open the production line optimization map numbered 319." Chen Xiaoyun said calmly.

"Okay, Xiaoyun." Achen pulled down the interface of the character window, and a large picture of the production line came out.

As soon as the picture came out, the data value marked red in the lower right corner was very conspicuous: the average production time of a single product: [2.13 seconds]; the theoretical maximum daily average output: [40563]!
"Can it reach a maximum of more than 4 per day?" Chen Mengchuan asked with some surprise.

"Yes." Chen Xiaoyun replied with one word.

"Achen, open the detailed structure and personnel arrangement of this data, and project it to our computer system." Xu Shuwei said.

"Okay, Dad Xu." Ah Chen stood up with a smile, and the design was displayed in full screen, cut into 4 different structural images, and there were instructions on it.

Chen Mengchuan looked at the auxiliary computer on the side, walked forward, looked at it carefully, and then smiled after seeing it. This theoretical data is somewhat untenable, and there are many problems.

After a while, Xu Shuwei said: "This theoretical production process is indeed feasible, but the 24-hour uninterrupted production of equipment is impossible."

"However, some of the above points have given me inspiration. If our current equipment rest time is readjusted to achieve 3 hour of production every 1 hours, 6 cycles a day, this can be increased to 18 hours of continuous production. .As for the arrangement and configuration of personnel, cooperate with the equipment. Rest together, work together, and put eating, rest, and shift time in this rest time. Then optimize the deployment of personnel, and set up 1~2 free on each production line people's jobs."

"Ah Chen, according to what I just said, re-optimize and like this design drawing." Xu Shuwei said.

"Okay, Dad Xu." Ah Chen took out a large pen and started to write like doing homework.

After 7 or 8 seconds, Ah Chen jumped up with a smile, and said, "It's done, Dad Xu!"

The data on the screen has been updated, the number of workers has increased, and the production time has decreased. The average production time for a single product: [2.13 seconds], and the daily production limit is estimated to be 30400~30420 sets.

"30000 sets? If it can reach 3 sets of Nissan, then it is not bad." Sun Zhongyong said.

Toni gently pushed the glasses: "Achen, optimize again, rationalize the production time to 20 production hours per day, and then compare."

"Okay, Dad Toni." Ah Chen quickly recalculated everything on the screen, and soon two comparison data came out, and the screen was divided into two areas of data.

Under Toni’s proposal, the number of workers is the same, but the production time is increased by 2 hours. The production time of a single article is still 2.23 seconds per set, and the daily production limit is raised to about 33800 sets.

"The machine is changed to a break of one hour every six hours. This time is enough. The workers' meal time and shift time are also enough to use four hours. This plan will be more reasonable, and the output will be higher. If it can improve, this plan should be feasible." Toni pushed his glasses and said.

"However, there may be some decline in specific implementation, and some small faults on the production line are always inevitable, so if calculated, the output of each production line will be around 31000~32000." Toni Added another sentence.

"Brother Xu, please cooperate with Chen to calculate how feasible it is for all current production lines to use this plan to modify and implement, and how many adjustments are needed? Implement it quickly, and I will trouble you." Chen Mengchuan said to Xu Shuwei on the screen.

"I printed it out immediately, organized the manpower and started to change. These probably won't be too difficult. Give me 2 days, and I should be able to complete the changes in these production lines and arrange new workers at the same time. At the same time, I will recruit a batch of new people. Come as a substitute." Xu Shuwei agreed.

After confirmation, the screen turned off, leaving only Chen Mengchuan and Toni.

"Toni, how is the progress of the robotic arm?" Chen Mengchuan asked.

"These high-precision robotic arms of Finlan Kingdom are indeed much more powerful than Ke Da's, and their precision is also very accurate. Their operating system is very perfect. Ah Chen has already analyzed a large part of them, but it needs to be completely analyzed. It will probably take a while to get all the data," Toni said.

"The design framework of Tianzhi's robotic arm has been perfected according to the structure you provided. From the structural point of view, it is indeed far superior to Keda's robotic arm. Not only Keda's robotic arm, but even these high-precision Fenlan The mechanical arm is not comparable. Although the idea of ​​the 6-node mechanical structure will increase the amount of calculation, it is far worth the amount of calculation compared to the degree of flexibility." Toni's eyes revealed a lot of fanaticism.

In the past few years at Keda, his research on robotic arms has been very in-depth, and he is far more proficient and passionate than Xu Shuwei.Now that there are enough conditions to study robotic arm technology, it is perfect for him.

"The practicability of the 6-node origin mechanical structure in small and medium-sized robotic arms is much higher than that of the 3-node origin machinery. Many countries are still researching and thinking about this design. Whether we can give priority to realizing the 6-node origin robotic arm depends on you. That's it, Toni." Chen Mengchuan said seriously, Toni has dabbled in all kinds of research.Any high IQ talent in various fields, as long as he puts his energy into it, he can achieve achievements far faster than ordinary people.

Before, when Chen Mengchuan was calculating and counting the potentials of all the girls who were new to Tianzhi, Chen Mengchuan curiously asked Chen to calculate the potentials of himself, Toni and Xu Shuwei.

The result is that Xu Shuwei: 84 points, Toni: 88 points, Chen Mengchuan: insufficient data to calculate.

 Second, please recommend!

  


(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like