God-level Golden Hand

Chapter 1477 Ignite Once

As for whether people who saw this line of writing would really not imitate it, it had nothing to do with Xu Jingxing.

Anyway, with this line of writing, even if something went wrong, Xu Jingxing couldn't be found.

Of course, I couldn't find him in the first place, and this was just to avoid getting entangled with some sand sculptures, which would be too troublesome.

In today's society, once an accident occurs, many family members don't think about how to deal with the aftermath, but first find a person who is responsible for the blame. Don't say whether the scapegoat can be deducted, try to deduct a few times first, and if it is deducted, it will make a lot of money , Even if you don't make a lot of money, you can often rely on some comfort money based on morality.

Encountering such a sand sculpture is really disgusting.

With such a line now, similar risks can be avoided.

At the same time, it can be regarded as doing a little duty for social harmony, so as not to be criticized as having no sense of social responsibility.

After hanging up this line of writing, he continued to cut.

Carefully measure the size of the cut copper plate, and then continue to polish it to be more accurate.

Then continue to cut other parts and polish.

After the measurement was correct, he began to carve on the outside of the copper plate. Instead of using a fixed electric sharpener, he used the traditional chisel engraving process. He took out the brand-new set of chisels he just bought, and started to jingle.

A chisel is similar to a commonly used carving knife, but its hardness is extremely high, and its precision is slightly poor. The specific process is similar to that of stone carving.

It’s just that the thickness of the copper plate is only 2 mm, so it can’t withstand the drastic chiseling, so it can only be done gently, and the engraving line must look smooth enough, and the difficulty is not low.

But after trying a few times, he found the feeling. He didn't even outline the pattern. After glancing at the design drawing, he jingled the pattern on the design drawing on the copper plate, and the effect was almost exactly the same as the design drawing. Especially It is the smoothness and symmetry of the lines, which are almost the same as those carved by Aurora, but retain some characteristics of hand-carving.

After engraving all the patterns that need to be engraved, use sandpaper to polish all the shell components that have been cut and engraved with patterns, until the polished tiles are polished to a bright level to complete this link.

"See how it works?" Show the semi-finished component in front of the camera.

"Stunned!"

"Xu Shen's hands are simply against the sky."

"It's a luxury to operate a grinder and grind metal with hands that should be playing the piano."

"Brother Nana's craftsmanship is undeniable. Although it is just a simple single-line drawing, it is also very shocking. The lines are extremely smooth. The character's configuration, size, proportion and layering are very strong. It is a traditional painting style, but it is also very impressive. Obviously borrowing from Western painting, the three-dimensional effect of the sketch is drawn with single-line freehand brushwork, which is amazing, and this is not drawn with a brush, but engraved on a copper plate with a chisel.

"There's nothing to say, Xu Shenniu is right."

"Brother, don't you ask this knowingly? If you ask, who among us dares to say no?"

"So-so, God Xu, this one is useless, so gather it up and give it to me, I don't mind it."

"It's beautiful, looking forward to the finished product."

"You don't know what level of craftsmanship you have, and you still need to find a sense of recognition from us? Hurry up and start, and I can't wait to see the finished product."

Of course Xu Jingxing had confidence in his skills, so he asked casually. After all, it was a live broadcast, so he had to interact with the audience in the live broadcast room a little bit.

After asking, he put the polished and chiseled casings together, and then welded them with the electric welding machine he just bought.

The shell is very important, and the sealing is guaranteed, especially the oil tank for storing fuel, which must not leak at all, so it must be welded with a welding machine.

As a pure novice, he carefully manipulated the welding machine to weld the outer casing of the lighter into shape, and after cooling down, he carefully polished the solder joints smooth and complete with a grinding wheel, and then began to make other parts.

The production of other parts is more difficult, such as screws, thimbles, and hinge parts are all small in size and must be polished carefully.

For example, let’s talk about screws. If there is a lathe, you can directly process standard screws by inputting instructions. But there is no lathe here, so you can only process them manually. It is very difficult to process each thread. The engraving is irregular, and the silk path must be smooth and fit tightly with the nut.

Is it difficult?
It's really difficult.

But after finding the trick, it is actually the same. It is nothing more than drawing the picture first, calculating the data clearly, and then strictly controlling the accuracy.

Nuts are more difficult to make, but for Xu Jingxing, who has mastered the skills of internal painting, it is nothing more than being more patient, and buckling according to the drawn spiral thread bit by bit.

Anyway, for Xu Jingxing, making screws and nuts was the most difficult job, and the rest were basically not difficult.

Both the leaf spring and the spring are from the county seat, and they can be used as long as they are cut into the desired shape and height.

Finally, it should be polished, welded and assembled.

After assembling all the parts, he found to his satisfaction that all the parts fit together perfectly, and the error between them was so small that it hardly existed. Although the installation was not so smooth, it could be pressed according to the fine grinding. Go in and pack it up.

Tsk tsk, it shouldn't be a problem for me to pass the test as a senior fitter.

Even if an experienced old fitter comes, I'm afraid he won't be able to do it as fast as I can.

After confirming that there is no problem with the assembly, open the hole cover of the oil tank and pour some special lighter oil into it. After the fuel soaks through the cotton core, press your thumb on a groove on the side of the saber-mounted lighter. The position of the place suddenly bounced away, and a wisp of flame curled up.

Once lit.

perfect.

Close the lid, open it again, close it, and open it again.

Successful ignition several times in a row.

The netizens in the live broadcast room were happy: "Xu Shen, draw a lottery soon, I can't wait."

"God Xu, God Xu, look this way, I want to win the lottery!"

"Brother, take pity on me, I have been in your live broadcast room for so long, and I haven't won once."

"Brother Nana, do you want to make an appointment? You don't need to treat me like a human being."

"A very handsome lighter. This shape is very beautiful at first glance. It is the crystallization of modern craftsmanship and traditional culture. The two styles and elements are very well integrated. The most spiritual thing is the circle of fire patterns, which is similar to the conventional fire patterns. Different, the fire pattern designed by Xu Shen has only three lines, but the radian and structure of the three lines have successfully depicted the true shape of a group of flames. Sublimated to a very high level, there is fire when you hit the stone, and there is no smoke if you don't hit the element, people only know it after learning, and it is unnatural if you don't learn..."

"It's beautiful. It was the first time I made this thing and it was a success. This skill is amazing."

"I think this video can be edited and put on some websites to earn some extra money. It is more enjoyable than many similar videos."

"Pretty, I want it."

"I think I can do it too, but who will sponsor me a welding machine, a cutting machine, a workshop and some copper materials first?"

"I want to want to draw a lottery quickly."

"Brother Nana, is there a wave of PY?"

Xu Jingxing glanced at the barrage, and said with a smile: "This is a trial work, it is not perfect, and there are not many personal elements included, so there will be no lottery, and the ID given to it is 'Miao Ke** De Luo Ba’s netizen, thank you for his suggestion, the second one will be drawn again, believe me, the second one will be more beautiful.”

"Wow, envy!"

"Jealous to the wall separation!"

"That's okay too?"

"God Xu, this ID is so vulgar, I can't give it to him. Seeing how elegant my ID is, I should give it to me."

"Crying."

"God Xu hurry up, I can't wait, I have a hunch, I will win the lottery soon."

After Xu Jingxing went to the toilet, he continued to work.

He already had a rough draft on the shape of the second lighter, so he didn't need to ask netizens for their opinions before starting to do it.

When he finished drawing the shape, netizens were shocked.

"Is this a mobile phone?"

"It's such a classic style, it looks so familiar."

"This is a memory of youth hahaha."

"Xu Shen is indeed a man with a life. If this is really done, many people will rush to ask for it."

"Is it a clamshell? Or is it just one shape?"

"This is the first mobile phone in my life, hahaha."

"I'm looking forward to it, God Xu hurry up."

"Brother Nana, this ratio of length and width is a bit weird. Will it be very difficult to make parts?"

"Watching Xu Shen's live broadcast, there are indeed surprises everywhere. Even if you don't get a prize, it's a good eye-opener. You can't see similar content on other anchors. Xu Shen, watching Rockets, although I know you don't care about it. A little money."

Xu Jingxing was not very keen on the rewards from netizens. When some netizens gave rewards, he would say a few words of thanks when he was in a good mood, but most of the time he would not respond. These netizens save some money, after all compared with him, almost 90.00% of the netizens can only be regarded as poor.

He couldn't bear to grab the wool of the poor.

So although he can receive a lot of rewards every time he starts the broadcast, he really rarely thanks those netizens in front of the camera, at most he pulls them into the group to say thank you in private.

If he really operates as well as other anchors, his income in terms of rewards will be several times what it is now, and it will not be a problem to earn hundreds of thousands or even millions a month. Note that it is an average number, and it only counts donations. reward.

So when he saw the netizen's rocket, he showed the drawing without saying anything: "This lighter may be relatively large in size, and it will not be very convenient to carry around, so friends who don't like it don't need to participate in this lottery. , although the probability of winning the lottery is very low, but if you win and you don’t like it, it’s so boring, hehe.”

"Let's not talk nonsense, let's start it directly. This time I will make a big change to the internal structure of the lighter. The difficulty will indeed be relatively high, but we craftsmen are not afraid of difficulty, but we are afraid that it will not be difficult. The higher the difficulty, the more excited. Come on, let's get started, and you are all ready to draw the lottery."

(End of this chapter)