live on the computer

Chapter 46 The Birth of "Warrior"

When the gate was closed, Li Chunfeng could clearly see the piece of machinery and equipment through the camera in the brightly lit factory building.

Suddenly excited like a child, looking at this device for a while, and looking at that device for a while.

In fact, after those engineers installed and started debugging each piece of equipment, because they were connected to the network simultaneously, these equipments were immediately controlled by Li Chunfeng.

According to Li Chunfeng's request, the seller put several self-propelled robotic arms on standby after installation.

This is convenient for Li Chunfeng to operate. He quickly controls these self-propelled robotic arms and turns on each device.

The core factory in Area C suddenly seemed to come alive. Under Li Chunfeng's multi-threaded control, a handling robot transported the designated raw materials to the designated location.

There are also palletizing robots that place ordered semi-finished parts on some conveyor belts.

When everything was ready, Li Chunfeng excitedly started the processing of multiple procedures, and saw the roar of machines in each machining center, and the parts were quickly processed one by one, and then transported to the designated position by the conveyor belt.

Then the palletizing robot will place the parts neatly and properly.

And some robotic arm robots accurately transfer some parts from one place to another, and then transfer them to the machining center for the next process.

Because Li Chunfeng connected some processing centers in parallel, multiple processes were completed simultaneously, and some parts could be processed faster and better.

The metal scraps generated during the production of parts in various machining centers will be collected by cleaning robots once they fill the trash can inside the chassis.

As the parts that meet the requirements are continuously completed, Li Chunfeng begins to transport the parts to the assembly robot. With the completion of the assembly, a brand new industrial robot is born.

If someone stands here, at a glance, the scene is full of vitality and orderly, but there are no human beings in this large-scale industrial production scene. This kind of sci-fi movie-like picture has a great visual impact.

At this moment, the assembled new robot looks like a multi-handed monster, with six flexible and unusual manipulators.And its feet are also six-legged, with a height of 1 meter. The back is a platform box with a length of 4 meters, a width of 1.5 meters, and a height of [-] meters. It can place materials or finished parts like a carriage.

When it is in standby, the six manipulators will be folded in the box, which looks like a rectangular parallelepiped device, which is not eye-catching.

When it moves, the whole robot looks like a huge six-legged spider, walking very smoothly and at a very fast speed.

Li Chunfeng controlled this new type of hexapod robot to quickly walk in the warehouse. After some tests, he found that it was completely consistent with the results of his simulation test in the virtual reality world.

Immediately, he was more confident in developing and manufacturing various items by himself.

Subsequently, Li Chunfeng implanted an artificial intelligence in the main control computer under the box, and the artificial intelligence controlled the hexapod robot.

All of a sudden, the six-legged robot seemed to have lost the agility just now. Although the various movements were still exactly the same, they still felt a bit sluggish overall.

Obviously, the computing power of this customized artificial intelligence is insufficient, and there is a certain gap between it and its own direct control, but it is much more flexible than the various robots I bought.

Li Chunfeng gave instructions to the artificial intelligence, and the robot immediately began to disassemble a machining center.

I saw its six slender robotic arms, as if piercing through flowers and blowing willows, with skillful and precise movements. It took only 10 minutes to disassemble a five-axis five-linkage CNC center.

Immediately afterwards, it went to an eight-axis machining center to get some parts by itself, and then went to a 3D metal printer to get some special-shaped parts.

Back at the disassembled five-axis machining center, parts were quickly replaced.

In this way, the parts processed by other equipment with better precision are replaced by it into the five-axis machining center.In about three to ten minutes, a five-axis five-linkage machining center was reassembled.

Compared with the previous one, this new five-axis machining center only has some changes in appearance, and it has hands and feet.

It has four manipulators and four wheeled feet, which can move as a whole, but not fast.In addition, it is equipped with six anchor feet, that is, when it moves in place, the six anchor feet will fall down for self-fixation to ensure processing accuracy.

In this way, it can move and fix independently. As for the accuracy, after Li Chunfeng replaced the internal parts with more accurate parts, it has reached an astonishing level.

After having the first machining center like this, the follow-up work is repeated continuously, and it is still multi-threaded and synchronized.

As if the robots and devices were reproducing themselves, new ones were being added all the time.

Among the raw materials purchased this time, there are also a batch of high-performance chips, and Li Chunfeng has replaced both the equipment and the new robots.

In this way, you can run your own brand-new customized artificial intelligence, although this type of artificial intelligence is subject to many restrictions due to chips and storage, and its intelligence is not high.However, he was still named "Wisdom" by Li Chunfeng.

Li Chunfeng divided the artificial intelligence he designed into four levels, namely weak artificial intelligence, strong artificial intelligence, super artificial intelligence, and intelligent life.

And low-level artificial intelligence will obey the instructions of high-level artificial intelligence.Of course, all artificial intelligences absolutely obey their own instructions, and their own ideas can come to them at any time and directly manipulate them.

At present, artificial intelligence based on existing chip technology can only reach the level of strong artificial intelligence at the highest level, and the higher two levels require brand new chip technology.

With Li Chunfeng's current knowledge reserve, he is only confident in making chips for super artificial intelligence applications. As for the chip technology and algorithms required by intelligent life, further research is needed.

Even if "Lux" is a weak artificial intelligence, the processing accuracy and execution efficiency of these devices are several blocks away from the international level. With "Lux" as an intelligent brain, these devices and robots can be relatively smart and autonomously complete their own orders. instructions.

In the final analysis, it was Li Chunfeng who wanted to be lazy and didn't want to do everything himself.

Time gradually passed, and the night gradually deepened.

As each piece of equipment is upgraded and transformed, these equipments have become real smart manufacturing equipment. They are usually in a standby state, and the network communication module is replaced by a wireless mode.

Li Chunfeng even reserved interfaces to facilitate the purchase of new modules in the future, all of which are configured to connect to satellites.

The entire factory area has been completely covered by the wireless network, and Li Chunfeng can fully feel the electromagnetic signals of this frequency band.

This was the first time Li Chunfeng felt, as if he was like a fish in the water, indescribably happy.While thinking about it, he tried to directly mobilize a hexapod robot with his mind, and let it run towards the F area.

I saw that the six-legged robot carried out the instructions without hesitation, and moved very nimbly. It took only seven or eight seconds to reach the F area near the gate, and the speed was a little faster than that of a human [-] meters.

Then, Li Chunfeng let it take back a batch of raw materials, and saw it quickly put a batch of materials into the back box, and then ran back.

Li Chunfeng understands that his thoughts may also be some kind of electromagnetic waves, or some kind of particles, as long as they are in the electromagnetic radiation field, they can spread.

Therefore, those kamikaze 2.0 clones can penetrate into those devices that are not connected to the Internet through the adjacent electromagnetic radiation field.

Like the last time I was able to get the information directly from the independent computer in country R, ​​it never happened again. Obviously, the last success was related to the explosion of thoughts.

Maybe that's the direction of my growth and evolution, but I don't have any clue now.However, Li Chunfeng is also very content, because now the scope of his involvement has gone beyond the Internet, which is already something that others dare not even think about.

Subsequently, Li Chunfeng retained a small part of the original handling robots, palletizing robots and mechanical arm robots, and most of them were transformed into a new type of hexapod robot - Lux.

Even the remaining part of the robot has been replaced with the "Lux" brain, which has greatly improved the operation accuracy and other aspects, and humans can instruct them to do things with voice.

Looking at these upgraded devices, Li Chunfeng still sighed secretly, "Unfortunately, the performance of these chips is still too bad, many instructions cannot be executed, and even weak artificial intelligence can barely run, let alone a higher-level artificial intelligence. smart.

It seems that I need to own the ability to produce chips myself.However, I only need laboratory-like equipment that can produce chips on a small scale to meet my needs.

As long as I have the equipment, I can digest and absorb it quickly, and then produce or improve it as I like.Well, it is daytime in country M, I can place an order to purchase a batch of equipment, and then airlift them over. "

Thinking about it, Li Chunfeng immediately made a purchase list for some equipment that he needed to add to the manufacturer in country M.

It is believed that after about a week, these devices will be transported across the ocean to Haidu by air.

After working hard all night, the factory in Area C finally completed its preliminary self-upgrade.

　Li Chunfeng has begun to have production capacity, book friends step up to vote for it!

　　Clicking and collecting can't be less!

　　
　
(End of this chapter)