Live broadcast of making arms from paper shells, the police asked me to register

Chapter 246 The terrifyingly powerful laser hand cannon!

Chapter 246 The terrifyingly powerful laser hand cannon!

The project used to test the laser hand cannon is similar to the test project for tank armor-piercing projectiles!

On the huge test site, solid armor steel plates with a thickness of 220 millimeters, a length of 1.5 meters, and a width of 1.2 meters were placed at intervals!

In order to test the maximum power of the laser hand cannon, Chen Wen directly asked Major Li at the test site to arrange and place ten solid armor steel plates spaced apart from each other!

Everything is ready, just waiting for the operator to receive orders at any time and start testing the laser hand cannon!

"Comrade Xiaolin! Start testing the power of the laser hand cannon!"

Seeing that everything was ready on the test site, Chen Wen immediately used the walkie-talkie at hand to give instructions to the soldier responsible for controlling the exoskeleton armor.

"Yes! Mr. Chen!"

"Order received! Preparing for test!"

"Laser hand cannon charging begins!"

The exoskeleton armor is equipped with a temporary communication device. Through this temporary communication device, the operator Xiaolin in the exoskeleton armor can communicate with the outside world.

After hearing Chen Wen's words, the other party immediately responded in the communication channel.

Immediately afterwards, everyone could see that the operator Xiaolin was inside the exoskeleton armor, controlling the exoskeleton armor to raise his arms and aim at the thick steel plate not far away!

Then, a faint red light gathered in the center of the palm of the exoskeleton armor!

If you listen carefully, you can even hear the buzz of the laser hand cannon!

This status indicates that the laser hand cannon is charging!

When Chen Wen was developing this laser hand cannon, he specifically asked Zhou Yuchen to research metal materials that could withstand powerful high temperatures!

Some of the parts used to make the hand cannon, including hand armor for the exoskeleton!

The small nuclear fusion reactor device, when the laser hand cannon starts to charge, energy is being continuously transported towards the laser hand cannon!

Generally speaking, a laser hand cannon can cause considerable damage and power in just a few seconds of charging!

But Chen Wen wanted more intuitive data, so he asked the laser hand cannon to be charged for one minute to see how powerful the laser hand cannon could be!

As for why Chen Wen specified one minute, but several minutes or even half an hour?

Of course, it is the hand armor metal material of the exoskeleton armor. Although it is very resistant to high temperatures, its heat resistance has a limit!

Before Chen Wen arranged for everyone in the laboratory to assemble the exoskeleton armor, he had already conducted some small tests in advance!

The experimental results of these small tests show that the limit that the metal material of the hand armor can withstand is that the laser hand cannon device is charged for about one minute!

If you continue to charge it, it will start to cause damage to the metal materials of the hand armor!

Of course, this experimental data is not very accurate, so Chen Wen specially made a protection!

Prevent the laser hand cannon from being overcharged and causing the device to become uncontrollable!

……

While Chen Wen was staring at his watch, Xiao Lin, the exoskeleton armor operator in the test site, also began to operate the armor and prepare to fire the laser hand cannon!

"Report to Chen Gong! The laser hand cannon is fully charged!"

"Everything is ready, do you want to proceed to the next step?"

At this time, the laser hand cannon has been fully charged. Looking at the display in the head armor, it indicates that the laser hand cannon has been fully charged.

Xiao Lin immediately used his communication device to report to Chen Wen.

As for why Xiaolin always asked Chen Wen for instructions instead of asking the person in charge of the testing site, his immediate boss, Major Li?

Of course there is a reason for this!

This military individual soldier exoskeleton armor research and development project is the scientific research project that Chen Wen has attached most importance to for more than half a year!

Major Li is only the person in charge of the test site, but he doesn’t know enough about some tests! Therefore, it fell to Chen Wen himself to direct and test the military individual exoskeleton armor!

"Start testing!"

After hearing operator Xiao Lin's request, Chen Wen directly took the walkie-talkie and gave the order.

Following his order, a dazzling light erupted in the testing site!

This dazzling light made everyone unable to open their eyes for a while, and they could only squint slightly to feel the power of the laser hand cannon!

Of course, the light of this moment came and went very quickly!

Everyone in the test site calmed down for a while, and their eyes finally felt much better!

Then everyone was stunned when they saw the armor steel plates used for testing on the test site!

I saw only ten armored steel plates spaced apart from each other on the field and with a thickness of 220 millimeters.

It was directly melted through by the powerful high-energy laser!

Every armor steel plate had a hole punched by the laser hand cannon!

There is still red solidified molten steel hanging on it that has not yet completely cooled down!

"Damn it! So fierce!"

Seeing this scene, Zhou Yuchen and Wu Dongyang, who were standing next to Chen Wen, were also shocked by this power!

Although they are participants in the research and development project of military individual exoskeleton armor, the weapons and equipment on the exoskeleton armor are designed and controlled by Chen Wen!

They were also shocked by this power!

You must know that the 220 mm armored steel plate is only called a steel plate in name, but it can actually be called a steel block!

The laser hand cannon on the exoskeleton armor easily melted through all ten layers of spaced armor steel plates!

This is something that even a tank may not be able to do!

Maybe tank shells can penetrate these ten layers of armored steel plates, but they definitely can't be as easy as laser hand cannons!

While everyone was immersed in the power of the laser hand cannon, Chen Wen was looking at the exoskeleton armor in the distance.

I am thinking about whether this laser hand cannon can be transplanted to the tank when the fourth generation main battle tank research and development project is launched in the future!

Transform the laser hand cannon into a laser tank gun!

Of course, Chen Wen would have to spend some time planning the detailed research plan!

After all, loading a tank laser cannon on a tank and loading a laser hand cannon on an exoskeleton armor are not trivial problems that need to be solved!

……

After fully experiencing the power of the laser hand cannon, Chen Wen was already very satisfied!

The next few tests are basically to follow the instructions and let Xiaolin, who is responsible for operating the exoskeleton armor, operate according to the orders!

More than half an hour has passed!

The experimental work of military individual exoskeleton armor has been completely completed!

This experiment was conducted in many aspects!

From the weapon's power and performance to the protective and safety performance of the exoskeleton armor, everything has been tested!

After completing all the testing work, Major Li from the Jinling Military Region Weapons Testing Ground came to Chen Wen's side again!

"Gong Chen! Can I experience it myself now?"

(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like