Chapter 58 There Should Be No Problem

At that time, Minister Fang was also under considerable pressure before he approved the equipment to the Red Star Rolling Mill.

Who told Factory Director Yang at that time to swear that he would be able to figure out the habits of these two pieces of equipment as soon as possible and build production capacity as soon as possible? This can be regarded as a military order.

It has been more than half a year since Director Yang last made a guarantee, and this should have some results.

This time, Minister Fang led the team down to specifically inspect the completion of this military order.

After hearing what Minister Fang said, Factory Director Yang said with a smile: "Don't worry, the workers in our factory are basically familiar with these two pieces of equipment, and they are now ready for normal production and operation."

"Okay, let's go over and have a look." After hearing Director Yang's affirmative reply, Director Fang suggested going to have an on-site inspection.

Hearing what Minister Fang said, Director Yang's expression was slightly unnatural, but he quickly adjusted it.

"Mr. Fang, don't worry about this. We have just started work and the machines and equipment still need to be warmed up for a while."

"You and all the leaders have come all the way here. Can we go to the conference room to take a break and drink some water first? I will report to you the recent production situation of our factory by the way."

"Okay, then we'll check out the production status of the new equipment later."

When he heard that the machinery and equipment needed to be warmed up, Minister Fang didn't think much about it, so he led a large force and followed Director Yang to the conference room to listen to the report.

While taking Minister Fang and others to the conference room to drink tea, Director Yang secretly called Deputy Director Li over:

"Lao Li, how is the operating status of our two new equipment?"

After hearing Director Yang’s question, Deputy Director Li whispered:

"The equipment is in pretty good condition, but as you know, these two pieces of equipment are imported from foreign countries, and the operating instructions are written in English!"

"Although the ministry organized operational learning at the beginning, we also invited foreign experts to give lectures."

"But you also know that among the engineers in our factory, Mao Xiong's writing is just okay, but no one understands Yingjiang's writing."

"Although there was a translator at the time, the translator didn't understand mechanics. Sometimes the translated things were a bit inconsistent, so everyone just listened to them."

"When they come back from learning, they will be confused and stumbling in how to operate it themselves, let alone teach us workers."

"During this period, our workers are barely able to operate, and they are not skilled at all."

Hearing this, Factory Director Yang frowned: "What should we do? Now Minister Fang is bringing people here, obviously to see if these two pieces of equipment can create production capacity!"

"I got a guarantee from Minister Fang at the beginning, so I shamelessly asked for these two pieces of equipment."

"More than half a year has passed, and our people can't even operate the machine proficiently. How can I explain this to Minister Fang!"

Deputy Factory Director Li thought for a while and said: "I think Minister Fang and the others just came over for a look and won't stay long. Let's find a few skilled people to operate the equipment. It's really not feasible for the engineers who were there to learn how to operate the equipment to be around." Stare.”

Director Yang looked at Deputy Director Li with some worry: "Is this possible?"

"We don't want to produce in large quantities. We just run the machine and there shouldn't be any problems." Deputy Director Li said confidently.
Seeing that he had no other choice but to do this, Director Yang nodded and said: "Okay, then you go and make arrangements quickly, but don't dare to make any mistakes."

In the office of Technical Section Three, Lin Shengli arrived and saw Fang Weiguo cleaning.After Lin Shengli greeted him with a smile, he came to his seat and sat down.

Seeing Lin Shengli coming over, Fang Weiguo hurriedly put down the broom in his hand, picked up the thermos bottle and filled Lin Shengli's large porcelain jar with water.

Since Lin Shengli was promoted to engineer, Fang Weiguo became Lin Shengli's follower in the technical department.

The whole day is long for Brother Shengli, but short for Brother Shengli.

Seeing Fang Weiguo's cleverness and cleverness, Lin Shengli was not shy and often gave Fang Weiguo pointers.

Lin Shengli took a sip of tea and took out the latest issue of the newspaper that Fang Weiguo brought from the communication room and read it.

Originally, the work of these engineers in the technical department was relatively easy. Generally, as long as there was no problem with the workshop equipment, most of them would be drinking tea and chatting in the office.

Lin Chenggong is even more relaxed.

After he was promoted to engineer, he took Fang Weiguo, a young man, to inspect and maintain the workshop equipment that the three groups were responsible for.

Some problems on the surface and some hidden problems were found and fixed by Lin Shengli.

Now the equipment in the three workshops that the three groups are responsible for can be said to be in the best operating condition among the equipment in the entire factory. As long as there is no major man-made damage, within two or three months, the three technical groups will have nothing to do. .

As for Lin Shengli's daily work schedule, he first goes to the Technology Section in the morning to drink tea and read newspapers to learn about the latest information.

In front of the people in the technical department, I studied with Mao Xiongwen’s mechanical books.

In the afternoon, he went around to various workshops to practice his theoretical knowledge.

Don't look at it. Lin Shengli hasn't taken the fitter grade test now, because it's not necessary at all. Why would he take that test again when he's already an engineer?
(Fitters are the collective name for manual workers in mechanical assembly and repair operations. They are named because they often use vise to clamp workpieces on the bench.

A fitter is a type of work that uses fitter tools or equipment to process, trim, and assemble workpieces according to technical requirements.

Benchwork mainly includes chiseling, filing, sawing, scribing, drilling, reaming, tapping and threading (see threading), scraping, grinding, straightening, bending and riveting, etc.

Fitter is the oldest metalworking technique in mechanical manufacturing.

The main task of the fitter is to process parts: some processing that is not suitable or cannot be solved by mechanical methods can be completed by the fitter.

Such as: marking during parts processing, precision machining (such as scraping and cutting templates and making molds, etc.), inspection and repair, etc.

Assembly: The parts are assembled according to the assembly technical requirements of mechanical equipment, and the parts are assembled and finally assembled, and after adjustment, inspection and commissioning, etc., they become qualified mechanical equipment.

Equipment maintenance: When the machinery malfunctions during use, is damaged, or the accuracy decreases after long-term use, affecting its use, it must also be maintained and repaired by a fitter.

Manufacturing and repair of tools: Manufacture and repair of various tools, fixtures, measuring tools, molds and various professional equipment. )
However, in the eyes of several workshop directors and old masters, Lin Shengli's current manual work level is at least as high as level five or six.

In fact, Lin Shengli's level is many times better than that of Yi Zhonghai, an eighth-level fitter.

(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like