Synthesis of everything starting from models

41 Assembly
As the high-energy laser is continuously emitted, the metal powder is sintered layer by layer.

The laser sintering printer runs very fast. In a short time, a thin layer of part of the model appeared on the printing platform.

Li Anchor took a look at the entire production area, which was up and running again. This time, not just some, but all the printers were up and running. He then returned directly to the office.

Returning to the computer, he opened the backend of the Music Note Mall, counted new orders again, and processed the chargebacks that had just appeared.After processing these things, Li Anchor adjusted the printing quantity in time.

Li Anchor then ordered a large number of consumables for printers online, and then searched for 3D scanners online. Then Li Anchor just took a look and closed the web page.

In fact, the price displayed on it was too high, so high that Li Ao had the urge to scold his mother.

So he gave up the idea of ​​buying this thing in the near future, but he didn't throw away the idea, but just postponed it.

After finishing this, Li Anchor came out of the workshop and went to the bathroom in the park to wash his face and rinse his feet before returning to the factory. Afterwards, he did not bother to take care of all the running machines. He went directly there himself. Behind the display case.

Lying on the bed at the back, listening to the sound of the printer running continuously in my ears, I covered my ears in pain, and I didn't know when I fell asleep.

I don't know how much time had passed, but Li Anchor, who was lying on the bed, finally made a move. His eyelids moved slightly, and he was about to wake up.

Li Anchor opened his eyes, touched his phone and checked the time, and found that it was already approaching noon the next day, which really surprised him.

I originally thought that he would be woken up by the alarm clock he set, but it seemed that the alarm clock he set was of no use.

He sat up from the bed, shook his head vigorously, and wiped away the eye mucus from the corner of his eyes with one hand. After doing this, his consciousness became really clear.

The sound of the printer running in my ears before going to bed has long since disappeared. At this time, except for the sound of the switches and monitoring machines running not far away, the factory seemed particularly quiet.

After getting off the bed, I ran around the factory building and opened all the blackout curtains. Only then did the sunlight finally shine in through the windows.

After looking at the brightness of the workshop and feeling that there was no need to turn on the lights, Li Ao calmly walked towards the laser sintering printer.

When he came to the printer, Li Anchor first pulled up the transparent protective cover, and then looked towards the printing platform. He saw that the platform was already filled with printed parts.

He extended his hand to the printing area and felt the surrounding temperature. He found that the inside of the printer had returned to room temperature. After finishing these steps, he carefully extended his hand towards the part.

When his hand touched the part, he didn't feel the temperature on it. Li Ao knew that it should have been printed long ago. The high temperature generated by laser sintering had dissipated. It seemed that it had been long enough.

Li Anchor operated a small forklift to lift out the printing platform filled with printed parts, and then used tools to break the parts off the printing platform one by one.

The printed parts are not heavy. Although they are all metal parts, Li Ao used lightweight metal powder when printing.

He removed the outer fuselage, wings, landing gear and other items of the Yinwu model aircraft one by one and placed them on the open space in front of him.

He picked up the half-printed wing, felt the weight of the wing in his hand, and pressed hard on the wing that seemed to be a natural one.

Li Ao found that there was no pressing, and the wings still maintained their original shape. This discovery made him feel the power of the printer, and this printer was very smart in terms of materials.Because of the material of the wing, just by looking at it with the naked eye, you can tell that this material is different from the one used to print the engine before.

In Li Ao's opinion, the current wing should be an aluminum-based titanium alloy, a lightweight alloy synthesized by the printer itself.

As for how the printer does it, this is not something Li Anchor can understand at all, but as time goes by, one day he will be able to understand the principle.

As for what he wanted to do now, it was to synthesize his optimized wings. When he started printing, he had already made up his mind, so he printed two pairs of wings in total.

After all, he is not an expert in aircraft design. The wings he optimized still have many minor problems or major problems that have not been discovered.

But putting these in front of plug-ins, is this a problem?It's not a big deal at all.

Through the synthesis of the wing, Li Ao believed that he would be able to eliminate minor problems or potential problems on the wing.

Then turn off the surveillance again, close all the curtains, and prepare for protection.

After being prepared, Li Ao began to synthesize the two pairs of wings. The synthesis went smoothly without any problems. Not long after, a pair of wings appeared in front of him.

Li Ao was already familiar with the magical scene that happened in front of him, so he calmly picked up a wing and observed it.

Holding the wing in hand, the weight does not feel heavier than before, and the Li Anchor seems to be lighter.

As for the appearance of the wing, overall it has become more harmonious and more in line with aerodynamics and other sciences.

This situation of development towards the good side makes Li Ao feel great. Anyway, it is a cheating life that does not need too much explanation.

The successful synthesis of the wing made him very excited. He could not wait to assemble the printed parts immediately and install the prepared mini engine on the Yinwu aircraft model.

As soon as this idea came up, Li Ao couldn't help it, but he didn't start assembling it immediately.

Instead, first take out all the things that have been printed by other printers, and let the printer start printing again.

In addition to the laser sintering printer, after several other printers started running again, Li Ao took a set of tools and started assembling the newly printed Yinwu body model.

All the metallic luster body parts were assembled by him one by one. The mini engine that he had built before had also been moved to the side of the body.

At this moment, it is just waiting to be assembled and then put into the model aircraft.

As for the internal operating system of the aircraft model, that is, the avionics and other things, it was left over from Li Anchor's previous days as an aircraft model, a very ordinary four-channel operating system.

The machine body was installed bit by bit by Li Anchor, and the parts on the ground continued to disappear bit by bit. In the end, only some parts of the power system were left on the ground.

(End of this chapter)