Siheyuan: Starting from a fitter

Chapter 25 Machine Tool Maintenance
On February 2th, I will officially go to work today, and it is estimated that the work of adjusting the machine tool will also start.

Sure enough, as soon as he arrived at the workshop, he was called to the office by the director. He first announced the factory's rewards and promoted Li Guo to a level 3 fitter, with a salary standard of 42.Li Guocheng was very happy, and his future life would be much more relaxed.

After the technical department arrived, we discussed the sequence of maintenance adjustments.

"Xiao Li, this is the king of the technical department. He will cooperate with us in maintenance and adjustment." After the director introduced the two parties, he added: "Xiao Li, how long does it take to adjust the guide rails of a machine tool?"

"Depending on the wear and tear, the degree of trimming is different, and the time required is also different. Scraping and polishing requires a lot of energy and consumes too much mental energy. This is a continuous operation, so it is recommended to have one machine every day, so that I can continue to fight." , with Li Guocheng's abnormal body, two machines a day would be no problem, and one machine a day would be enough to shock the world. If the strength of the TK-200 hadn't been exposed in the previous maintenance, it would have been at least half a month.

"Okay, just one set per day, I will arrange the shift, Mr. Wang is in charge of directing and recording, and Master Yi Zhonghai is in charge of assembly." The director said, "It's amazing. The assembly technique of a level 8 fitter is impossible to learn." of.

"No problem," Li Guocheng and Wang Gong both agreed.

"Then start from group 1, I will take you there."

Starting today, Li Guocheng began the eight-month guide rail adjustment task. He went to and from get off work every day, at two o'clock and on the first line, focusing on his work.

Every time he completes the repair of a guide rail, Li Guocheng pretends to consume too much energy, hides in the 6th group, and does private work in the name of rest and help. Everyone sees that Li Guocheng is exhausted every time he looks like a dead dog, so they turn a blind eye Close one eye.

On the first day of maintenance and adjustment, I followed the director to Team 1, which was also a horizontal machine tool. Wang Gong didn’t even look at the drawings. He had memorized the drawings and directly guided Master Yi to disassemble them. He answered Li Guocheng’s questions while guiding. Later, Both of them saw Li Guocheng's intention to learn, and began to explain while disassembling.

King workers can also disassemble and assemble, but compared to level 8 fitters, they are not inferior at all. After all, there are specialties in the industry.

It's not that Wang Gong has nothing to do, he has strong affinity and high dedication. You can try it as an ordinary worker and see if Wang Gong understands you.The reason is that he has seen the maintenance and operation of KT-200, and he was shocked by Li Guocheng, and he loves talents. Just like the older generation of revolutionaries, he deeply loves his country, so since he encountered good materials , just want to cultivate talents for the country.

With the accumulation of Li Guocheng's practice, his current memory and comprehension feel abnormal. After Master Yi completed the disassembly, Li Guocheng has constructed a three-dimensional assembly diagram in his mind, and the disassembly process has also been optimized.

Then it was time for Li Guocheng to perform. He observed carefully and touched the texture of the guide rail with his hands. After completing the modeling work, he also had a polishing plan. He took out a big file and cut it down, which shocked Wang Gong and the first man. I almost sat on the ground. Fortunately, everyone knows not to disturb each other during finishing to avoid excessive polishing.As the file flew, Li Guocheng did not use any other auxiliary tools during the whole process, just a file. The two of them were even more frightened. If it weren't for the KT200 example, the two of them had stopped long ago. They had never seen anything like this done.

But what surprised the two of them even more was that the finished part was very smooth to the naked eye, with no unevenness as imagined.

One of them holds a level and the other holds a right-angle steel ruler to check the level and flatness of the finished part.After measuring once, they looked at each other and repeated the measurement without belief. Finally, they confirmed that it was true and that the level and flatness were completely qualified.It was just a big file. It required such abnormal control, eyesight and calculation ability. The two of them were shocked on the outside and tender on the inside.

Thinking about the past, such a job required a fitter level 5 or above, which took one or two months to complete. It took only half an hour to complete half of it.What they didn't know was that Li Guocheng had slowed down his pace, otherwise it would have been completed by this time.

An hour later, the entire guide rail was roughed out.Li Guocheng changed to a spatula and started scraping and polishing the surface without using auxiliary tools. The two people next to him were already used to it and waited silently and looked at it in confusion.

Another hour passed, and the guide rail with the beautiful pattern was completely completed. With a responsible attitude, the two used auxiliary tools to repeatedly measure it, and it was perfect without any flaws.Both of them were numb.

At this time, under the guidance of Wang Gong, master Yi Zhonghai started the assembly.

Master Yi also completely calmed down. Such a monster must not make enemies, but must make friends.

Therefore, Master Yi explained the key points and tips of the assembly while assembling it just like the finished product.

After today's maintenance task was completed, the two went to the director's office to report their work, and another person was confused.

When Wang Gong returned to the technical department, there were a few more ignorant geese.

Li Guocheng arrived at the director's office and took advantage of the director's confusion to get the approval slip for purchasing scraps at his own expense.Then he went to the finance department to pay the money, then took the approval slip to the logistics warehouse to collect a large piece of scrap material, and returned to the 6th group of workstations.

"How's it going? Did your work go well today?" Zhang Tou asked with concern.

"Master, it's very good. Wang Gong and Master Yi both took good care of me. I learned a lot, but it took too much energy," Li Guocheng replied sincerely.

"That's good, be modest and prudent, guard against arrogance and impetuosity, practice your skills well, you can slow down the pace, and don't be arrogant" full of concern.

"Okay, I listen to you. You must work hard, study hard, and protect yourself."

At this time, the workers also greeted Li Guocheng from a distance. Li Guocheng was different now. He had become the director's celebrity. Everyone's mentality was no longer the same, and Li Guocheng knew it well.

Pretending to sit down and rest, drank a few sips of water, stood up and prepared to polish his throwing knife, choosing to imitate the multi-purpose bayonet on the Type 95 assault rifle of later generations. The 95-style bayonet is a reference to the American M9 bayonet. In addition to the basic bayonet functions, it can also be used as a fighting dagger and a field survival knife. The Type 95 multi-purpose bayonet has some modifications to the shape and texture design of the grip. Its blade has the functions of assassination, cutting, sawing and filing, and it has the function of cutting barbed wire when used with the scabbard. There is a knife in the middle of the right knife and above the left knife. The filing area is enlarged, there is a small whetstone on the back of the sheath, and there are simple screwdrivers and bottle openers at the bottom of the sheath.

Because it is used for throwing knives and fighting, there is no imitation scabbard.

Special steel will be recycled and stored even as scraps, so special steel cannot be obtained at all, so Li Guocheng plans to use long strips of ordinary steel scraps to make it, and the handle of the knife will be carved from wood in the secret realm after returning home.

An hour later, six exquisitely crafted Type 6 bayonets without handles appeared on the workbench. Seeing that it was almost time, he put the tools and knives into the tool box, cleaned up the work area, and went home from get off work.

After dinner, I took out a piece of wood with a golden and warm color, a darker reddish-brown heartwood, and an angular texture. I started carving the knife handle according to the shape in my mind. There were six knife handles, each of which was exquisite. artwork.

Put away the handle of the knife, clean your hands, continue to study Mao Xuan, and write your experience in the notebook, and go to bed at about 10 o'clock.

Please recommend!Ask for a monthly pass!
(End of this chapter)