This is Shenma Black Technology

Chapter 20 The Second Generation

On the third floor of the Shenma Technology Company factory, dozens of machines of different sizes are placed in an orderly manner in the three-story space.

Wearing a set of overalls and gloves, Ning Yifan looked at the new materials that were gradually forming in the high-temperature smelting furnace, with a faint smile on his face.

After the materials in the smelting furnace are integrated, the fuel valve is closed, and the raging flames gradually extinguish. When the furnace is opened, a scorching heat wave hits the face, and what appears in the center of the smelting furnace is a red-hot new material.

Taking out the long-handled iron pliers, Ning Yifan quickly picked them up and placed them under the small forging hammer.

dong dong dong ——

The hammer keeps rising and falling. After the material experiences high pressure and the internal atoms are shaped into the shape Ning Yifan wants, the iron tongs are used again to pick up the new material and put it into cooling water for cooling.

In the end, what Ning Yifan got was a rectangular piece of new material alloy. This is a material with high toughness and high hardness. It is very suitable for processing one of the core parts of the injection molding machine that Ning Yifan is manufacturing and is prone to wear. part.

The alloy processing is completed, and the next step is to make it into the parts Ning Yifan wants.

Turning on the CNC machining center, Ning Yifan placed the new material on the fixture and fixed it, then started the CNC center to start processing. As the ultra-hard diamond tool rotated at high speed, a harsh friction sound was heard, and the excess material was cut off. Shaping, drilling, and polishing are all processes that Ning Yifan can control as easily as eating and drinking.

Ning Yifan has operated various machines in Dream Learning countless times. He has already developed instincts. Once he gets started, he naturally knows how to operate them. His eyes are like the most accurate measuring tools, allowing him to see things most intuitively. The processing progress can be adjusted at any time.

It took more than ten minutes and two extremely hard diamond tools to complete the production of the parts Ning Yifan wanted.

After closing the machining center, taking out the finished parts and holding them in his hands, Ning Yifan walked through the corridor composed of many machines and came to a large machine.

The machine had been opened, and the internal parts were exposed. Using tools, Ning Yifan disassembled the parts, removed one of the badly worn parts, and covered the newly created parts with a layer of lubricant. Place it in the position of the component you just removed, and then install the remaining screw parts back.

In this way, a machine that was originally badly worn takes on a new lease of life and is even more stable than when it was brand new!

Moreover, Ning Yifan has also updated the machine's control software, which makes it easy to control and the smoothness is by no means comparable to the original version!

After the modification of the injection molding machine was completed, Ning Yifan started the machine and tested it. At the raw material entrance next to it, the glue-like raw material was extracted by the machine and quickly passed through the mold to become a white plastic shell. This is the shell of the Phantom Projector!
With this injection molding machine, Ning Yifan can produce the casing of the Phantom projector himself, and no longer has to rely on ordering from other companies.

This has many benefits. The first is that it saves a large amount of money to purchase parts for the virtual projector.

Secondly, you don’t have to wait for a while for the goods to arrive every time you order from the Internet.

Third, a large bucket of raw materials can be used to make hundreds or thousands of virtual projector casings. The price is cheap and takes up much less space than the finished casing. Ning Yifan can purchase tens of thousands or 10,000+ units at one time. The material of the shell can be produced at any time if needed, and it is very convenient to improve if needed.In addition to the casing, the equipment parts that need to be ordered for virtual projectors today are much less than before. Except for the motherboard and light source, Ning Yifan can produce most of the equipment parts by himself.

This was the result he had been busy for more than half a month. He would go for a run early in the morning and then start working after breakfast. He could rest for an hour and a half after lunch, and then get off work at six o'clock in the evening. This was the final result he achieved.

Another relatively simple piece of production equipment was renovated, and Ning Yifan breathed a sigh of relief. The next few most difficult mechanical equipment would take a lot of time and energy to produce, and Ning Yifan was not ready for the time being. Made.

After taking a break, it’s time for the Phantom Projector to be upgraded. Netizens on the Internet who are looking forward to new products can’t wait.

Even for the casing of the next-generation product, Ning Yifan has already made the model parameters and only needs to start the machine to produce it. However, before that, Ning Yifan needs to go to Neon Country to buy a matching product. It's a very helpful thing. Of course, this product is not necessary. It is also Ning Yifan's interest.

The second-generation ghost projector, combined with Ning Yifan’s software development capabilities, can try to realize scenes from an anime.

In the golden autumn of October, more than half a month has passed since the factory relocation was completed and Phantom projectors resumed sales. Over the past half month, the number of Phantom projectors sold on the Internet has been rising steadily, making more and more people The more consumers can purchase the product.

The first batch of [-] phantom projectors at the beginning, to [-] phantom projectors a week later, to the [-] phantom projectors produced in the past few days, the production is getting faster and faster, and Ning Ning Yifan's funds are gradually becoming abundant.

When the funds from the sales of this batch of virtual projector products are withdrawn, Ning Yifan's funds will reach an astonishing 1 million yuan!

Only more than two months have passed since the first batch of two hundred virtual projectors were produced more than two months ago. Ning Yifan has easily achieved the small goal of [-] million, and has made more money later. There will only be more and more!

In order to produce the second generation of Phantom Projector, Ning Yifan spent a day rearranging the internal production machines of the factory and readjusting the production procedures of the fully automatic factory.

Nowadays, in the second-floor factory, several machines are rapidly producing various virtual projector equipment parts, such as the injection molding machine that has just been completed. After the plastic shell is produced, a flatbed trailer will be transported to the designated area, waiting for the products. line enable.

Similarly, several other machines that produce cooling fans, heat dissipation copper sheets, and other equipment parts can also complete the fully automatic process from adding raw materials to making products and then transporting them to the assembly line production station.

In this way, even after Ning Yifan leaves, as long as the raw materials are sufficient, the production process will not stop, and the delivery system operates normally. The produced products will be packaged and placed in the designated area, and they will wait for SF Express to pick them up. .

Finally, in order to deal with some unexpected situations, Ning Yifan also modified a strange-looking flatbed trailer with two metal robotic arms on its back. This is a machine that Ning Yifan can control remotely. Even if Ning Yifan is not in the factory, it can allow the robot to complete some simple tasks through remote control, ensuring that the factory can still maintain stable and normal production without anyone.

After sorting out the work in the factory, Ning Yifan could finally embark on a journey to Neon Country with peace of mind. This time he went out to discuss business cooperation and also to relax. He stayed in the factory for about a month, and Ning Yifan needed to relax for a while while dealing with various mechanical parts.

(End of this chapter)