Rebirth 09: Synthetic Male God

Chapter 295 Rushing to get a plane

"Mr. Zhou, Lao Mou, this way."

"Master Wen, just call me Xiao Zhou."

Zhou Rui was led to a small building outside Factory No. 03.

Today is already the third day in the 919 factory.

This is also Zhou Rui’s second visit to Factory 03.

The overall appearance of Factory No. 03 is a huge rectangle with a terrifying area. Walking in it, it feels like you are in a covered square.

On both sides of Factory No. 03, there are also some "ear rooms", some of which are warehouses, some of which are equipment rooms, and some of which are rest rooms. They can be seen as small squares connected to the main body of the factory.

The place Zhou Rui came to at this time was very special. There were heavily armed soldiers at the door, and there was not a single window in the whole house.

Only three words were written: reference room.

This is the place where the J-20 design drawings are stored, or one of them, specifically for factory technical workers to call and consult at any time.

The design drawings of the J-20 are very large and are divided into dozens of different links. The total volume is said to be hundreds of G, which is calculated in tons when converted into paper materials.

Most people can only check content related to themselves. For example, what Zhou Rui can see is the part related to the skin. Other weapon systems, cockpit systems, fuel systems, radar systems, etc. are not visible and require additional applications. .

And more than three people must be present at the same time, and no copies are allowed. If you need to borrow paper materials to use in the workshop, each piece of paper has a number and must be returned in its original form, and everyone in the team must bear the responsibility of supervision and confidentiality.

Zhou Rui looked at the small room that looked like a prison. There were several computers that were not connected to the Internet, and there were soldiers looking intently behind them.
"That's it?"

Wen Hongqi smiled and said: "The atmosphere is a bit strange. I will get used to it in two and a half days in the next three days. This is how we check the design drawings."

Smiling like the warden.
It was a little different from what Zhou Rui thought. His original plan was to use the "master time" to quickly understand the relevant design drawings of the J-20, and maybe he could get some other inspirations, but under observation, this was obviously not the case. realistic.

The content of the information was extremely large, and Zhou Rui was not a mechanical student, so he could only turn on the focus time.

From time to time, I have to discuss it with Wen Hongqi.

In the last five hours, the concentration time was full, and the "prison guard" behind the scenes changed three times before I had an overall concept.

There is no fine button, fine button will stay here today.

The so-called skinning literally means applying skin to the aircraft.

In the early days, the main purpose of the skin was to make the fighter aircraft stronger and more stable, have a relatively better aerodynamic shape, and there were even skin designs designed for bulletproof purposes.

But now, beyond visual range, supersonic speed, and super perception are the needs of the new generation of fighters. It is no longer the era of thick steel plates to protect against machine guns.

Whoever you hit will hit the target with one shot. The key is that you have to be able to hit it.

Smart skinning means that a large number of sensors are embedded in the skin during the skinning process, so that the "skin" of the aircraft has all-round external sensing like human skin.

Compared with the past, where sensors were concentrated in specific locations and each had its own business, smart skin is much more comprehensive.

As for its materials, at least the J-20 plan uses special flexible materials as carriers, allowing the aircraft to withstand greater aerodynamic loads and deformations.

For example, the natural deformation of materials during flight, as well as the increase in reflective surfaces caused by opening the weapon bay and changes in the canards.

The flexible material here is a high-elastic fiber membrane. This is the key point and will be examined later.

In the original design, the J-20 planned to add a ferrite invisible coating with a total thickness of about 2mm under the flexible material.It is thicker than a one-yuan coin, equivalent to a layer of "putty", and it is also fragile putty.

This is a decision made after "referring" to the f117 and f22 technical paths from various channels.

Now that there are four images, it seems to be much easier, but there are also many problems.

First of all, the "four-image material" with electronic control properties needs to be combined with various sensors on the surface of the aircraft. Four-image metamaterials can even be used to replace part of the circuit system to reduce internal space pressure.

In addition, the splicing of four-image materials also requires high precision, otherwise it will affect the absorption rate and stability.

Finally, for the "four-image metamaterial" used in the J-20, the base material can no longer be scum like PET. Instead, the flexible high-elastic fiber membrane developed by Rongfei, code-named MP3, must be used. (Skin material No. 3)
This part also requires some effort. While preparing new materials, we also need to teach the technical staff here.

Zhou Rui spent five hours painting design drawings, again in a closed space without windows. When he came out, he felt like he had been released from prison, greedily sucking in the fresh air.

Five hours!You can watch any movie you want!
Mou Zhongyi couldn't hold on for a long time. He was old and lacked blood and energy. He became weak after watching it for only two hours.

After Zhou Rui came out, he summoned all the "Furui" people and immediately organized work groups.

"We don't have many people, but we still need to divide the work. Ke Chunjiang and Pan Xiangling haven't arrived yet, and some of the remaining eight people have to prepare four-image metamaterials based on MP3 substrates."

As soon as these words came out, several gay men dodge and their eyes wandered.

There is such a "big guy" (fighter aircraft) sitting in the factory, and you ask them to go back and do the film
Making films is not as interesting as making airplanes.

Zhou Rui looked at everyone's expressions and knew what they were thinking, but someone still had to do the work.

Finally, he looked at Mou Zhongyi, Han Ziyin and Xue Li.

After all, the three of them are relatively weak in terms of physical strength. The work in the factory is not difficult, but it is definitely not easy.

With Mou Zhongyi in charge, the progress there is guaranteed.

Mou Zhongyi struggled a little, but finally nodded and said: "Forget it, I'm really old. It's okay to use my brain, but it's a bit messy to do it with my hands. I'll lead the team to prepare new materials."

Han Ziyin and Xue Li had no objections.

The task of the other five people is even more difficult.

If things go well, the results will come out in two months. If not, it won't be surprising if nothing happens in two years.

Zhou Ruidao: "We mainly focus on guidance and assistance, but if you want to solve practical problems, you must have hands-on skills and understand the process. Otherwise, you won't know what to say to others, and the discussion will be completely wrong."

"I have already discussed it with Master Wen. In the first week, we will learn and work while mastering some basic processes. We don't need to be strong but we must understand them. At the same time, we will also explore the technical points of the new skin process."

"You are all leaders in the scientific research community. I believe you are all competent. If you are really not competent, it doesn't matter. You can go to Mou Lao'er's group to help prepare new materials."

Several big men shook their heads like rattles.

"It can be done! I was born to make screws! My nickname is Little Screw."

"The fortune teller said that I will become a technical expert in the future. I just took more than ten years of detours in scientific research! Come on!"

"My right hand is fast and steady, and my left hand is smooth and smooth. Just watch my performance!"

(End of this chapter)