Nuclear power has come out, you say you are an undergraduate?

Chapter 47 Hardness still needs to be tested? (seeking subscription)

In front of a large laser cutting machine.

Several researchers were walking back and forth, and there were a few people beside them holding small notebooks and recording the experimental data.

At the moment, they are making the final adjustments for the laser cutting machine.

Zhang Pingyuan was also on the side, calculating the energy output by the laser cutting just now.

In the distance, a researcher shouted.

"Director, equipment debugging is complete!"

Zhang Pingyuan just nodded and said lightly.

"let's start!"

With the affirmation of Zhang Pingyuan, those scientific researchers also started the laser cutting machine again.

"Zizzizi!"

The flickering light reflected on the alloy.

At the same time, the surface of the metal became pitch black again.

This time, Zhang Pingyuan also made up his mind.

A big hole must be made in this alloy!

Under the continuous irradiation of the laser cutting machine, the alloy still has no reaction.

It's just that the surroundings illuminated by the laser are even darker.

Witnessing this scene, Zhang Pingyuan's eyelids twitched involuntarily.

Good guy, the laser cutting machine under this power does not seem to cause obvious cutting marks on the alloy.

He couldn't help but said in a low voice.

"Increase the power!"

As his voice fell, the operators immediately made adjustments.

I saw that the cut light beam was a bit brighter.

The noise of "Zizizi" became more and more obvious.

But even so, there was still no trace left on that small piece of alloy.

It seems that there is no difference from before!

Zhang Pingyuan frowned and continued.

"Continue to increase the power!"

This is a laser cutting machine, it's impossible to solve even a small alloy, right?

The beam of the laser cutting machine is also a little dazzling at the moment.

But that's all, the light beam falling on the alloy still doesn't seem to change anything.

He was startled, there was no reaction?

Zhang Pingyuan shouted loudly.

"Keep adding!"

But there was a response from the operator over there.

"Director, the power is already maxed out!"

Zhang Pingyuan fell silent, staring at the somewhat dazzling beam of light.

In front of this large laser cutting machine, the alloy turned out to be slightly reddish.

Other than that, nothing has changed.

The laser cutting machine continued to operate for nearly 10 minutes.

On the alloy, the red spots didn't even spread.

Zhang Pingyuan raised a hand, signaling to stop.

The laser cutting machine also stopped working at the same time.

At this time, due to the high temperature on the alloy, the extremely fine red dots had already begun to disappear and recede.

There was a look of shock on his face.

What was this alloy designed for?

It is so heat-resistant!
Will it even cool itself down?

This is the maximum power operation of a large laser cutting machine!
In this way, there is no trace left on the alloy.

Some as long as the oxidation causes some blackening around the alloy, you only need to wipe it lightly with a paper towel.

The alloy will be restored to its original state!
Everyone was shocked.

There is actually such a hard metal in this world.

Below, a researcher can't help but analyze.

"Director, if the conversion is based on the power of the laser cutting machine."

"The material of this alloy is at least level 15!"

"At least, with the current laser cutting machine technology, it's hard to go any further..."

The laboratory was also extremely quiet at this moment.

Zhang Pingyuan looked straight at Alloy.

When he watched the red spot on the alloy almost disappear, he realized something.

"This... is self-cooling?"

"Can metals still have this property?"

There was a look of incomparable suspicion on his face.

The research team on the other side rarely saw such a skeptical expression on Zhang Pingyuan's face.

Zhang Pingyuan shouted anxiously.

"Quick, test the temperature of the alloy body surface!"

I saw that on the electronic instrument, the temperature number started to drop crazily from more than 4000 ℃.

It didn't slow down until it dropped to 30°C.

Zhang Pingyuan was extremely shocked!
This alloy is simply incredible!

It is actually able to achieve such an efficient heat-resistant self-cooling ability.

If it is used on a space vehicle, it does not even need any cooling coating and material assistance.

Only relying on this alloy body, it can withstand ultra-high temperature.

It turns out that this piece of metal does not need artificial cooling at all.

Under the high-intensity heat of a laser cutting machine, they did not reach the melting point.

Not even a trace of it yet!
Zhang Pingyuan took a deep breath, stretched out his hand wearing a rubber glove, and picked up the alloy.

Even through the rubber gloves, he could still feel the temperature of the alloy.

Not as warm as expected!

It's even a little cold to start with.

He was extremely shocked.

In less than 1 minute, the temperature has dropped from over 4000°C to the point where you can touch it.

This kind of characteristic, even artificial cooling may not be able to achieve it.

Zhang Pingyuan's eyes were somewhat incomprehensible.

The ability of this alloy is too advanced.

It's not like the current science and technology can be developed.

In his opinion, this alloy technology surpasses the current science and technology by at least 50 years!

This is still a conservative statement!

Hardness, melting point, self-cooling, and high temperature resistance, any of these characteristics appearing on the alloy are enough to cause a sensation.

What's more, this alloy is compatible with all the characteristics!
The research team on the side couldn't help being stunned when they saw this scene.

It is illegal to touch the metal directly without cooling.

At this moment, no one estimated this rule, and their eyes were focused on that piece of alloy, incomparably shocked.

"What the hell, the hardness is just the tip of the iceberg of this alloy's capabilities."

"This melting temperature, and self-cooling..."

No one doubted the alloy's prospects.

It can be used in almost every field you can imagine!

Military defense, heavy weapons, large strategic weapons, spacecraft, etc., simply need no imagination.

Once it is manufactured on a large scale, for Daxia, it will not be a level of improvement at all.

In the research team, everyone looked towards Zhang Pingyuan.

"Director, do you still need to test the hardness?"

Zhang Pingyuan shook his head and said helplessly.

"The laser cutting machine didn't leave any traces, how can I measure it?"

The researcher continued to ask.

"What about the melting point...?"

Zhang Pingyuan glanced at it.

"Do you think that's possible?"

A large laser cutting machine of that scale, under that high temperature, did not reach the melting point.

Obviously, there is no need to ask this question at all.

He put the test data aside, shook his head again and said.

"Just measure the density."

"Let's start research and development as soon as possible according to the information documents."

(End of this chapter)