Siheyuan: Lou Xiaoe's rear-end at the beginning

Chapter 198 [Yi Zhonghai made another big mistake and was angered by Liu Jiacheng (for subscription)]

Red Star Rolling Mill.

All the workers in the workshop gathered together, and the workshop director's current mood could be seen from his frowning.

Surrounded by the crowd is a rolling mill that is not working properly!
"Yi Zhonghai, what's going on?"

The workshop director pointed to the rolling mill in front of him that could no longer work and asked.

The damage to the rolling mill is a major event, and the cause of each damage needs to be reported in a report, and even punished.

A steel rolling mill had already been broken in the hands of Sha Zhu before, and now another one was damaged in the hands of Yi Zhonghai.

After the workshop director saw it, his blood pressure started to rise!

"Director, I'm not very clear either."

"I just operated normally, and then it became like this."

Yi Zhonghai explained with an aggrieved face, beads of sweat had already started to appear on his forehead.

He is also afraid!

It is not a trivial matter that the rolling mill was damaged in his hands. The last time Shazhu broke a rolling mill, he was also punished and deducted money.

"How did your normal operation become like this?"

Facing the questioning from the workshop director, Yi Zhonghai faltered, and it took him a long time to hold back a sentence: "I don't know either!"

"Go and bring Liu Jiacheng over to have a look."

If anyone in the entire Hongxing Steel Rolling Plant can repair the rolling mill, it is not a technician or a ninth-level engineer in the factory, but Liu Jiacheng.

The repair of the rolling mill last time made Liu Jiacheng famous, and now people still talk about it from time to time.

"I'll go now!"

Yi Zhonghai knew that Liu Jiacheng was busy with preparations for locomotive manufacturing during this period of time, and if there were no accidents, he should be near the office area of ​​the factory.

But... what did he say?
Once the damage to the rolling mill was heard by the leaders of the office area and even Director Yang, wouldn't he be miserable?
But now that the rolling mill was broken, it would be impossible for him not to go to Liu Jiacheng.

Yi Zhonghai trotted all the way, and soon came to the office area of ​​the factory, where the technicians, technician assistants, engineers and the leaders of the factory basically worked in the office.

Soon after Yi Zhonghai came in, he heard Liu Jiacheng's voice. After knocking on the door, he said bravely at the door, "Liu Jiacheng, come out."

Yi Zhonghai didn't want others to know that there was a problem with the rolling mill he was operating, so he wanted to play a trick and call Liu Jiacheng out before talking about the problem.

"Yi Zhonghai?"

"What is it?"

Liu Jiacheng was quite confused. Although he and Yi Zhonghai were neighbors in the same compound, they basically never spoke in the rolling mill.

This Yi Zhonghai suddenly came to him... It's no good to appoint him!
"Liu Jiacheng, come out and say something." Yi Zhonghai stood at the door and waved again.

"If you have something to say, just say it. If you really have nothing to do, just wait until I go back."

He and Yi Zhonghai don't have time to chat here, today he managed to find some time to communicate with technicians and engineers here, this kind of opportunity is rare.

Since he studied three times in the ministry and commission, and added his small part of engineer's technical theoretical knowledge in the system, now he has no obstacles in communicating with ninth-level engineers.

But his current job is still an eighth-level fitter, unlike technicians and engineers who can stay in the office and draw pictures every day.

Yi Zhonghai was anxious like an ant on a hot pot. After thinking for a while, he still bit the bullet and said, "There is a rolling mill in our workshop that can't work. The workshop director asked you to go and have a look."

"The rolling mill is broken??"

All the technicians and engineers in the office focused on Yi Zhonghai.

The rolling mill is broken, which is very serious!
Even if there are some minor problems, they dare not move, and they need to hire foreign engineers to solve them.

That's why they were shocked that Liu Jiacheng was able to repair the rolling mill!
"You broke it, didn't you?"

Liu Jiacheng questioned in a cold tone. Actually, there is no need to think about this matter.

If it wasn't for Yi Zhonghai who broke it, he didn't have to cover it up like this.

"As soon as I entered the rolling mill today..."

"Why do you have so many reasons? You have to admit that you broke it." A bad-tempered technician had already opened his mouth angrily before Yi Zhonghai could explain.

Every rolling mill is a treasure in the rolling mill. If it breaks down, it will cost a lot of money to repair. The most important thing is to invite foreign engineers. After they have invited foreign engineers, they still need to eat, drink and entertain, and finally get a lot of money. Arrogantly leave.

These technicians always scold their mothers angrily every time they think of this!
This is the most useless!
Now that Yi Zhonghai broke a rolling mill, the whole office didn't give Yi Zhonghai any good looks.

"……it's me!"

Yi Zhonghai accepted the criticism with his head down.

"Okay, I'll go and have a look."

When everyone heard that Liu Jiacheng was going to repair the rolling mill, they all got up and followed behind.

The last time they didn't see Liu Jiacheng repairing the rolling mill in person, they had always heard the word of mouth from other people. Now that they can see it with their own eyes, how could they miss such a good opportunity to learn.

Even the ninth-level engineer is actively following behind, wanting to learn some essence from this opportunity!
……

A workshop.

"Comrade Jiacheng, hurry up and see what's going on with this rolling mill."

When the workshop director saw Liu Jiacheng, it was as if he had seen a life-saving straw.

If anyone in the entire rolling mill could repair this rolling mill, it must be Liu Jiacheng.

"Director, let me take a look first!"

Liu Jiacheng came to the rolling mill. According to Yi Zhonghai's description, there would be abnormal noises when the rolling mill was turned on.

He observed for a long time and decided to take it apart!

The disassembly method is exactly the same as last time, first use a towel to pad on the screw and then slowly unscrew it.

"This is the internal structure of the rolling mill. This is the first time I have seen it."

"Learn a bit, this kind of opportunity is rare."

"Master, have you seen the internal structure of a rolling mill before?"

"Hmm... It's the first time I have experienced this personally. Every time that group of stupid foreigners don't let us watch when they repair the rolling mill."

The ninth-level engineer next to this matter was indignant again, but after his indignation was over, he immediately began to stare intently at the inside of the rolling mill.

After Liu Jiacheng dismantled the inside of the rolling mill bit by bit, his brows were also wrinkled, and his sharp eyes were instantly locked on Yi Zhonghai.

"Yi Zhonghai, are you still lying?"

Just now Yi Zhonghai said that the machine was like this when he came to the rolling mill, meaning he wanted to distance himself from it.

But the damage to this rolling mill was obviously directly related to Yi Zhonghai, and this old guy wanted to shirk his responsibility.

For a moment...all eyes fell on Yi Zhonghai!

……

(End of this chapter)