People rely on the aid money to live in the courtyard

Chapter 222

Taking the workpiece to Master Lu, Yi Chuanzong put the workpiece on the table with a dull expression.

"Master Lu, help me test it. I didn't finish the titanium alloy steel sheet very well."

Master Lu didn't want to see this person at first, his uncle is here, why do you keep looking for him?

But after listening to Yi Chuanzong's words, his eyes suddenly lit up. Didn't he complete it ideally?

Test this first!

"Well, just wait."

Yi Chuanzong nodded.

"You finished again, how are the last two titanium alloy steel sheets?"

Yi Chuanzong turned his head and saw that it was Director An.

"The finished product did not meet the requirements, and only had a dimensional accuracy of plus or minus five microns."

Director An was slightly taken aback. In fact, this is already considered qualified, because the qualified precision instructed by the factory director alone is that the error of plus or minus five microns is considered qualified.

If it can be completed, Director Yang didn't say anything, but his appearance seemed a little serious.

Master Lu also raised his head at this moment, his face was a little distorted, isn't this done ideally?
It's not that he hasn't done this kind of titanium alloy steel sheet before. It's good to be able to guarantee the error of plus or minus six or seven microns, and five microns is somewhat lucky.

The completion of all this is not ideal, and you still want to pass it directly?Plus or minus four microns, do you want to directly give a title of 'Tenth Grade Fitter'?

After some measurement, Master Lu said indifferently: "It's all a size error of five microns."

Yi Chuanzong was not surprised, turned around and asked, "Director An, have I finished the test now?"

Director An was silent for a while.

This assessment lasted for three days, and the assessment level of this workshop was six, seven, eight, and three levels. This person did it all in one day!
If you hadn't seen it with your own eyes, and confirmed it many times before.If he hears this kind of news, he might think that someone is cooperating to deceive him!
Now, except for one workpiece with a slightly larger error of [-] microns, the rest are all [-] microns, without failure... This is outrageous!

No mistakes, this thing is too much!
Did the factory manager already know what this person is capable of?It's not like that at the beginning!
If factory manager Yang came tomorrow and he reported the matter, what would be the reaction there?
Just thinking about it, Director An's face became even more strange.

"How about this, bring all your workpieces to the director of the technical department, let him measure it in front of everyone, and after recording the results, you can wait by Master Yi and Master Lu to help out. Measure too."

After thinking about it for a while, Director An decided to let everyone take a look at these made artifacts.

He is in charge of the test project here, and if there are no problems, it is credit. If there is any credit, his share is indispensable. Risks must be avoided.

Of course Yi Chuanzong would not refuse, "Okay, I'll send it to Director Qu now."

After finishing speaking, he directly lifted the wooden shelf on the ground next to it, and put all the parts he processed on it, so that he could take it over at once to save running back and forth.

Holding the center with one hand, Yi Chuanzong walked towards the platform as if serving food.

Seeing this person leave, Director An breathed a sigh of relief, and his tone was a little bit accusatory, "Master Yi, your nephew has this skill, you don't know about it, right? You said something in advance, it really gave us a surprise."

Yi Zhonghai smiled warmly, "He has a strong opinion and doesn't like others to arrange him to do things."

In fact, he was a little depressed two days ago, after all, he had just patted the table with him.

As the technical assessment was approaching, Yi Chuanzong was a little bit flustered. The uncle arranged for him to chop firewood, and this person finished just like Wan Wan.

There is no effective punishment method, and the uncle has been resting a little bit in his heart.Now he doesn't dare to let the big mother nag, because he is the one who bears the brunt.

Yi Chuanzong walked to the top of the platform, and the place slowly became quiet.

"Director Qu, please take another test to ensure that there will be no mistakes in the measurement."

Director Qu's face was slightly darkened, and his face was slightly rosy. He used to say that he was cheating and cheating, but now a pile of workpieces were placed here, and the crushing brought about by the technical level made him feel even more ashamed and flustered.

"Leave it alone. Director An is in charge today. I'll wait for Director An to come back and test it for you."

"Hey, thank you."

Yi Chuanzong placed all the workpieces on the wooden boards of the platform, and then lazily walked towards the uncle.

When approaching a table, Yi Chuanzong turned his head and smiled. Director Li looked at him blankly and didn't know what he was thinking.

Of course, Yi Chuanzong wouldn't laugh at a leader in front of so many people, but it's just that paper can't cover fire, so he really dares to bully anyone?If you dare to steal his pieces to play behind-the-scenes operations, you will have to settle sooner or later.

Back to the uncle again.

"Director An, Director Qu said you should go back and test again."

"Okay, you can move a chair from the side and sit down."

"Row."

Yi Chuanzong casually took a gray-black high stool from the side and sat next to the uncle, "Master, do you still have water in this teacup? Do you want to pour some?"

The uncle waved his hand, "No need, I've had enough drinks in the afternoon, and it's time to go back to eat after the finishing touches."

Yi Chuanzong sat lazily, and after a while, a middle-aged man came over with a workpiece, "Master Yi, help me measure it."

Yi Chuanzong directly reached out and took it, "I'll help you test it."

The middle-aged man's eyes were slightly surprised. He didn't think Yi Chuanzong's measurement had any credibility, but he didn't care. He had already measured it before coming here, and it was successful. He was not afraid of others measuring it several times.

"Master Xiao Yi, how far have you come in the test?"

Yi Chuanzong measured a few times with the tools at hand, and then replied: "It's over, the dimensional accuracy of your workpiece is 0.9 wire, which is considered qualified, but your strength is a bit harsh, there is something wrong with your technique, and the error is not uniform enough. If you want to improve your skills, you have to be more careful, go and register."

The middle-aged man's expression froze for a moment, and he was a little dazed until there was an extra workpiece in his hand. Was he educated?Is this directed?
He frowned and looked at Yi Zhonghai, "Master Yi, don't you want to measure it?"

The uncle shook his head slightly, and said softly: "The work Director An arranged for him, his measurement results are valid. If Master Kong is worried, you can ask Master Lu to measure it for you again."

It turned out to be such an attitude!

Master Kong was a little bit annoyed. After being lectured by a young man, he came down after a long time of testing, and finished walking?I'm afraid I will be eliminated directly!What qualifications do you have to say about him!
He walked to Master Lu angrily, with a smile on his face, "Master Lu, please measure it for me."

The main reason is that I am afraid that such registration will be invalid. After all, who would recognize the results of a young man's measurement?
Master Lu raised his eyes to look at Master Kang, then took the workpiece over, and began to measure it seriously.

He has already listened to what Yi Chuanzong said, so he will naturally not admit defeat at this time, and he does it faster than others. If he is not as good as others in measuring, it will be a blow to the self-confidence of a nearby old master. He must measure well!

Master Kang's face has calmed down a lot. As long as he succeeds in the assessment today, other things will be considered a good thing. He is just an ignorant so-called young man. Yelang speaks nonsense arrogantly. Just listen to it and go there. There is no need to offend the factory master.

It's just that he didn't see that Master Lu's face was getting more and more serious.

After repeated measurements several times, Master Lu said in a cold voice: "The maximum workpiece error is 1.1 wire, and the error value is greater than ten. There is something wrong with your operation method, and the workpiece is unqualified. You can go to register now."

Master Kang was dumbfounded when he heard this, and when he woke up the next second, he argued anxiously: "Master Lu, you must have made a mistake in the measurement, right? The one I measured below is qualified, this Master Xiaoyi It’s also adequate.”

Yi Chuanzong lazily added, "As the position of the application workpiece error can be tolerated, it is considered qualified. According to the measurement, it is indeed unqualified strictly speaking. It can be avoided if you pay attention later. If you don't correct it, the other As far as this kind of workpiece is concerned, there may be a phenomenon of passing but being 'unqualified', which will increase the probability of machine failure, and it is definitely correct to say that it is unqualified."

Master Lu raised his eyebrows, this kid is amazing, more than he thought, as a senior, he feels a lot of pressure!

Master Kang opened his mouth wide, and there are such things!

It turned out that I wanted to give him a size up, as long as I pay attention to change it, then everything will be fine, this person seems to be a bit powerful!

His face was extremely tangled, and his voice was a little more aggrieved, "Master Lu, I'm considered qualified for this."

Master Lu grinned fiercely, "I passed it by me. If you pass it, you pass it. If you pass it, you pass it. I don't recognize you as passing the test. Wait until next year and practice hard for a year. If your skills are not in place, what do you think?" Promotion, how can there be such a good thing? What is your job?"

Master Kang took the workpiece as if he was discouraged. If Master Lu failed, it would be useless for others to pass it.

Coming to the end, this is the last assessment, and it's only a year away, and it's clear that he could pass it before.

He was a little annoyed and asked: "Master Xiao Yi, why are you in charge of testing here?"

Master Lu said calmly: "Because he has completed the items for the sixth, seventh, and eighth grade fitter assessment, he was assigned here to be in charge of auxiliary measurement."

Master Kang looked shocked, and shouted, "Six seven eight?" How many workpieces are there?
Master Lu nodded calmly, "One workpiece with the largest error is six microns, and all other workpieces are five microns. Now take the third measurement at the director's side, and you can measure it."

Master Kang swallowed hard, looking at Yi Chuanzong like he was watching a ghost.

After standing still for a few seconds, he walked towards the place recorded next to him in a daze.

At this moment, his heart was full of annoyance. If he came directly after the first test, would he have passed the test right now?
A sixth-level fitter is 72 yuan a month, and a fifth-level fitter is 61 yuan a month. There is a difference of 120 yuan a month and [-] cents a month. Kung fu is gone.

"Be stricter in the test in the future, and there is always nothing wrong with fairness." The old man warned.

Yi Chuanzong nodded slightly, "Thinking about being responsible for the measurement for the first time, this person can persist until now, as long as a little problem is corrected, he must be strict."

"Hey, the first person to pass through my hand will pass the test. This is the end. Put it on me, and it will take two days to recover."

In a grandpa's manner, he still "put it on me", which is now gloating, this is "putting it on someone else".

Master Lu asked suspiciously: "Master Xiaoyi, how did you measure just now? I saw that you just measured it briefly. How did you know that this person's technique was wrong? And you didn't measure the position of the edge, how did you know the error over there?" bigger?"

"This……"

The expression on Yi Chuanzong's face was slightly awkward, how could he know?
Of course it was felt. With his hand, he could feel the roughness and undulations. This matter is a bit mysterious, after all, others don't know the pulse.

As for how to know that this person's operation method is wrong, it is of course that he has tried it all. The daily work is a little boring. In order to increase the difficulty, he will do it in a mess, and then repair it little by little.

It was just a boring thing at first, but I didn't expect to find the most suitable way of working for me, and also increased my wrong question collection.

He solves the problem now, he can correct it by touch, and even make the production easier if he makes a mistake at some point.

"It's fine if it's not convenient."

Seeing his appearance, Master Lu stopped asking. He thought to himself, this might be his unique skill.

Yi Chuanzong saw that his uncle was a little curious, so he could only explain: "I have three apprentices. When I corrected their movements, I observed the workpieces they processed. In order to teach them more accurately, I thought about it. What kind of mistakes will happen, and I have studied for a period of time. Master Kong’s mistakes this time are more obvious, so I can quickly judge.”

Master Lu was taken aback for a moment, good guy, this young man has a way, they are all thinking about how to make themselves more standardized, and they are thinking about what will happen when they make mistakes?It sounds amazing, but is it worth investing a lot of energy and time?
After returning to his senses for a while, Master Lu looked at Yi Chuanzong's plump face, his eyes were a little dazed.

Ever since he recognized Yi Chuanzong's technique, he would unconsciously put it on the same ladder, and also habitually raise his age.

This person is so young, he has only been in the factory for half a year, where did he spend so much energy and time?
Do geniuses have more time than others?

The expression on Master Lu's face was very tangled. He might want to do the same thing as the process of doing it, but the proportion of the harvest is completely different. He suddenly felt a little unconfident.

Later, Yi Chuanzong began to fish, because the measurement team had already arrived, and his presence here would affect the progress of the measurement...

After all the measurements were completed and the results were recorded, the workers waited quietly below, while Director An stood on the stage with three lists in his hand.

"Up to now, the three-day technical test has been officially completed. I believe everyone is waiting for a result. However, the factory has a limited number of places for promotion and promotion, and the factory needs to rank and select workers with the best skills for promotion. I am announcing now Examination situation."

"One person passed the eighth-level fitter assessment this time. I believe everyone knows who it is. Yi Chuanzong and Master Xiaoyi. All the workpieces are qualified. If anyone doubts it, you can measure it."

The workers looked at Yi Chuanzong as if they had seen a ghost. Since the man came here early in the morning, there has been a lot of commotion since he came.

It was supposed to be a lively place to watch, but it could also relieve the tension of the test.

As a result, the person behind tormented them all day, making a lot of noise.

The next day, I took the third-level test, and finally passed the eighth-level fitter's assessment... The whole thing was the same as listening to the story. In the end, this person sat on the measuring chair, and everyone was arguing about the measurement. Naturally, all of them passed the test. Those who didn't believe it were quiet.

"Master Nan and Master Ning do not have enough experience in processing titanium alloys, and they need to continue to hone in this area."

The faces of the two masters below were much calmer. They rarely come into contact with titanium alloys on weekdays. This time the requirements are too strict. They have tried their best, but they only reached a tolerance of plus or minus seven microns.

"The number of people participating in the seventh-level fitter assessment is 42..."

(End of this chapter)