Chapter 220 He's in a hurry!

What happened to the artifact?

Yi Chuanzong was a little dazed, of course it was finished, what else could be done?

Even if the work of a sixth-level fitter is simple, you still have to do the work one by one, and you can't be complacent, and you can't be arrogant.

After completing one item, proceed to the next item. This is a matter of work attitude.

"Director, these are finished artifacts, start testing now?"

Without much hesitation, Yi Chuanzong directly removed the workpiece from the vise, and replied, "That's fine, I'll send the finished one first."

Now that the factory manager has left, Yi Chuanzong did not lower his voice too low. Considering that there are still people around who are conducting assessments, his voice is slightly higher than ordinary people, and only a few people nearby can hear.

The director in front of him was stunned by the news. He is the director of the technical department. He kept staring at the person in front of him when he was working. took two.

That's it, tell him it's done?
The workers next to them were even more dumbfounded. They all did it from the project just now, and they will not forget it after only two days. At the beginning, it took them an hour on average, but now it took a few minutes for one person to finish the job?
Can you show me some face?
It will appear that their work efficiency is very low!They are all glorious workers, and they are also working hard, why should they hurt each other?
After waking up a little, the way they looked at Yi Chuanzong changed. They were a little dizzy from the shock just now, but now their eyes were full of distrust and sarcasm. They didn't believe that Yi Chuanzong finished so quickly!
After taking a few deep breaths, he hurriedly started to work on the work in his hand, watching a joke should not affect the test.

"Comrade, think about it clearly. If you take this one over, you will have to go through a serious inspection. I hope you have a more correct attitude."

The slightly darkened director's face turned even darker now, is it because the factory director gave an order to make this man so unscrupulous?

With such a domineering voice, do you really think you can do whatever you want with the orders of the factory manager?Do you think they will pass the assessment if they are perfunctory?
This is a contempt for their authority!This is slandering their personality!
Even if you turn a blind eye and close one eye, you have to see it.

Falsifying in front of hundreds of masters and dozens of leaders, whoever dares to do this will be directly stabbed to the top, and the factory director will not be able to protect him.

Yi Chuanzong was taken aback by this man, the power of habit is powerful, he usually works like this, and teaches his apprentices like this, whether he exclaims or is shocked, he is already used to it.

I started working around No. 20 in September last year, and now it is No. 19 in March, which is almost exactly half a year, and the specific working time is 150 days.

With great difficulty, he has nearly mastered his fitter skills, and his own skills have almost reached the point where he is almost inaccessible. He is actually in a rather excited and happy mood today, and he will unconsciously ignore some things.

Yi Chuanzong really didn't understand what was wrong with his attitude?
The workers around him did their jobs differently from him, and he didn't feel that he was much faster.

He was already doing it at full speed, isn't it normal to be fast?

He's in a hurry!
"Director, who do I hand over the workpiece to for testing?"

"Master Lu, the one next to Yi Zhonghai!"

After speaking, the slightly darkened director turned his head and left. He didn't even call Master Yi at this moment.

If his nephew could be so rampant, if he said that this matter had nothing to do with Yi Zhonghai, he wouldn't believe it even if he was beaten to death.

If you leave it to Master Lu, there will be no such troubles. This master is famous for his straightforward temper.

In the past, he said carelessly in front of the leader that he didn't do a good job, but even the factory manager didn't counsel him for so many years, and the test was justified!
'The official said that the wind is rain, and the afternoon is cloudy.Just said a few words, and provoked people again. '

Yi Chuanzong muttered something in his heart, and then walked to his uncle with a few workpieces, "Master Lu, please help me to test it."

Master Lu saw that he was alive, so he quickly sat upright, "Let's put it here."

Yi Chuanzong nodded, and then put down several workpieces one by one, all of which were small parts such as spindles, pistons, and oil valves inside the engine.

"You measure first, I will continue the assessment."

Yi Chuanzong left after speaking. There was no other way. Before taking the exam, he had to read all the questions. This is a good tradition left over from his previous life.

After taking a look, he felt a little nervous. The first two levels of assessment were okay, but the assessment of the eighth level fitter was at most complicated for him, mainly because there was a big job at the end!

"Continue testing? You want me to say it's unnecessary."

Master Lu muttered, picked up an inner shaft of the engine, and took a look at it. It seemed to be the same thing, but the accuracy was hard to say. He didn't think such a messy work could pass.

He turned his head and asked, "Master Yi, what do you think? How about you come to test?"

Yi Zhonghai took a sip of tea calmly, looked at the distrustful eyes of the leaders, and said softly, "Just measure it."

Master Lu nodded. His original intention was to let Yi Zhonghai take the measurement. Even if he hadn't passed it, he could modify the error to be a little smaller, so that it would look better after all.

He has a straightforward temper, and he will not intentionally pick things up if he can't see them. Failures, there is no meaning of re-measurement, and the error can be improved to a small point.

If he is asked to measure, then he specifies that there is one thing to say, and then the sloppy way of working, I am afraid that the error will make people laugh out.

Over there, Yi Chuanzong started working again under the supervision of countless pairs of eyes.

The black-faced director just now told everyone about Yi Chuanzong's reaction exactly, and a group of leaders here also frowned, and it's fine to do some things secretly. Such a grandiose deceit is a challenge to their prestige .

Now, half of the leaders are watching Yi Chuanzong's flashy work with amusement, and they are very sarcastic in their hearts. They thought he was a young man with good skills, but he was also a sneaky and slippery person.

The other half looked at Master Lu with expectant eyes. This man tested them to rest assured that even if he hummed an inexplicable Peking opera tune, this simple measurement problem would definitely not go wrong.

In the field, only Director Li and Director Sun were in a bad mood, because they had seen Yi Chuanzong's working method two days ago, and this person worked quickly and could guarantee precision.

Now, in addition to the guarding of the Armed Forces Department, the Security Department maintains discipline, the Technology Department is responsible for testing, the Production Department is responsible for preparing important personnel, and the Personnel Department is responsible for distribution, other unrelated departments will only come to join in the fun.

One of the two is the newly appointed director of the personnel department, who has to make do with things, and the other is the deputy director of the personnel department, so naturally they must continue to be present.

All of a sudden, Master Lu hummed the movements of Peking Opera, and exclaimed in his mouth, "Grandma's, is it true or not?"

After speaking, Master Lu turned his head to look at Yi Zhonghai, his eyes were full of shock.

Yi Zhonghai drank a big bowl of tea calmly. He knew how his nephew's skills were. Even though he couldn't do the work suddenly, there was really no problem after measuring the workpiece. Strange, I can only find reasons in my heart.

Master Lu didn't get a response, and turned his head to look at the workbench below again. At this moment, Yi Chuanzong was rubbing a workpiece in a circle, as if he was washing clothes.

At this moment, Master Lu couldn't laugh. This guy doesn't look good at his job, but this one is really qualified, even if he is going to do it at the end of the game, this is the standard.

After watching it for a few seconds, Master Lu's eyelids twitched for a while, and then he lowered his head again to check the other ones. As for the one just now, there is no need to measure it anymore. This is what he has been relying on for his life. It is basically correct once. He is now wondering if the one behind is Also have this precision?
A few minutes later, the accuracy measurement was over, and Master Lu's eyes were a little confused.

He found that he suddenly felt a strange feeling about the industry he had been engaged in for more than 20 years and his skills had reached its peak.

Can this kind of work achieve this precision?That's not what the teacher taught me back then.Now there is no one to teach him.

"Master Lu, how's the measurement result? Is it possible to terminate his test now?"

The director with a slightly dark complexion was a little anxious, because the movement of Yi Chuanzong's work did not seem to slow down at all. Just now, he was rasping the workpiece, and sparks fell off the workpiece. How urgent was the sound?

The test environment of several masters around has been seriously disturbed!

Master Lu's face was slightly silent, and after a pause for a few seconds, he said woodenly: "Director Qu, he has passed."

Director Qu, whose face was slightly darkened, was taken aback, looking at Master Lu with somewhat unclear eyes, is this a joke?
Calmly glanced at the calm and teasing Yi Zhonghai, no matter how he looked at it, he felt something was wrong.

Director Qu raised his voice a little, "Master Lu, are you qualified? This is a second test!"

Master Lu nodded, and then pushed the workpiece in front of him forward, "Go and measure, the dimensional accuracy of my measurement is 0.5 wire."

Director Qu's mouth twitched, outrageous!It's outrageous!
Is this co-author taking the test as a joke?
He said in a muffled voice: "Okay, if this is the case, then I will take it away and measure it again." After speaking, he picked up the four workpieces and left.

Back at the platform, Director An asked inexplicably, "Why did you bring it here? Didn't Master Lu measure the accuracy?"

Director Qu said in a muffled voice, "I have measured it, but I suspect that the data is fake, so I will measure it again."

Director An was a little confused, "How many test results are there? Master Lu's measurement shouldn't be wrong, right?"

Director Qu paused, raised his head, looked at each other, and said, "He said the dimensional accuracy is 0.5 wire." Then he lowered his head and silently measured.

Director An opened his mouth slightly but couldn't say anything.

The highest precision made in their factory is a workpiece with a dimensional accuracy of 3 microns that a master Xiang made by accident.

But if you want to do it again, the time spent is gone.

If you are lucky, you may make it one day, but there is a greater chance that you will never make it.

The faces of many directors on the platform were a little strange, but Master Lu would not lie, so this matter is likely to be true.

Looking at the strong figure who was still making Dangdang, they couldn't help but have a thought in their hearts, 'Can this really make qualified workpieces? '

Silently watching Director Qu, he suddenly raised his head, as if struck by lightning.

Director An had a guess in his mind, and asked calmly, "How is it this time?"

After waiting for five seconds, Director Qu looked at Yi Chuanzong with a dazed look. He slowly took a workpiece to the side of the table and said dryly, "Five microns."

After all, he picked up a workpiece again and started measuring.

After silently measuring the remaining three workpieces, Director Qu sat on the square chair without saying a word, looking at Yi Chuanzong in a daze.

Seeing such a demeanor, Director An also understood in his heart, the rest should be 0.5 silk, this person actually has this ability?

He glanced at Director Li calmly, this guy should have known about it long ago, right?

The technical test is carried out in the factory, and it’s fine if they don’t report it here, but they even say that people will be suppressed. If they don’t know Director Yang, they probably don’t even know that there are such people in the factory!

The higher the position, the greater the danger. This person is afraid that something will happen sooner or later.

Quiet.

The test below was in full swing, but the platform above was unusually quiet.

More than an hour passed.

Yi Chuanzong straightened up and heaved a sigh of relief. The content of the test was not difficult, but it was a little more complicated. He hurried and hurried, and finally it took nearly two hours to complete the work of the sixth-level fitter.

The main reason is that some written tests are more troublesome. This thing needs to be drawn and designed, and it is a waste of time to waste your brain. It is better to look at the drawings and just roll the iron, otherwise he can be faster.

Fortunately, they are all senior fitters, and the sixth-level fitters do not have the control of machine tools, because the precision of machine tools at this time is old-fashioned, and the accuracy starts with one thread, and it is normal when it reaches two threads.

Disassembled the workpieces one by one, and with the experience of the first assessment, he came to Master Lu with a pile of workpieces in his hands.

Putting it on the table, Yi Chuanzong said with a smile: "Master Lu, please hurry up, I have to continue the assessment."

Master Lu's face was a little silent. He looked up at this young strong man with a slightly dark complexion. Maybe it was because he was too strong that he worked so strangely?He also found an explanation in his heart.

Master Lu nodded, and then began to immerse himself in inspecting the workpiece.

Yi Chuanzong was not idle either, his eyes lingered on the workers below. Now that two hours had passed, the second test of these people was coming to an end.

It took a total of four hours in the morning, plus the leader started late, now it has been more than two hours, and it will be more complicated when you reach the seventh-level fitter. It may take a little more than two hours to get it done.

The eighth-level fitter knows that it will be more difficult without asking him. There are more than three hours left, so he can only keep speeding up. At least one hour should be set aside for the last big job.

Master Lu seems to be a little impatient, he can't do it so fast, if the measurement is slow, isn't it a joke?
At this moment, he has put Yi Chuanzong in the same position as himself, he is like this, everything is based on technology.

The factory director belongs to the factory director, and his technology is not as good as him, and he will drive people away if he comes to point fingers.

After some testing, Master Lu picked up a 'U'-shaped workpiece with a dull expression, "The dimensional accuracy of this workpiece is minus 0.6 wires, and it will be a little bit reluctant to test the eighth-level fitter. Next time, slow down a little. "

Yi Chuanzong nodded quickly, and then said with a smile: "At that time, I was distracted. I wanted to test it, but after thinking about it, I didn't care about it. It may have been a bit of a hassle. Thank you for your reminder. Next time I must be more serious."

Master Lu's face froze. He was just a kind reminder, but he heard such a sentence.

Did you miss work?

How can I pass?Nevermind?

Is this human talk?
Master Lu silently pushed the workpiece in front of him. He didn't want to see this person now. He always felt that listening to this person would make him feel uncomfortable, but he couldn't say a lesson, which made him even more uncomfortable.

(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like