Military industrial hegemony

Chapter 29 Harvest Season

After explaining to Secretary Xu and Father Chen with great difficulty, the misunderstanding was cleared up. Jiang Chen also looked depressed. This personal matter seemed to be like a work task, and Jiang Chen was also drunk.Although Jiang Chen has already explained it and made it clear to Ma Jun, Ma Jun is still not very happy. I don't even care about Ma Jun. I heard that she is going through transfer procedures now, and her parents will go with her. Her father has already gone through the early retirement procedures. It seems that he went to some kind of silk factory, which produces silk. In this era, our country mainly exported some agricultural products or some domestic specialty products, and silk was one of the hot spots. It was definitely something that most young men and women yearned for at that time to be able to work in a factory that directly exported to earn foreign exchange. The price seems to be that Chen Hongyan agreed to the son of the deputy director of the factory to marry him. Of course, the son of the deputy director has also liked her for a long time. They got married through an introduction. They didn't have the concept of free love. There are many people who think that marriage is a way of life. Chen Hongyan is just one of them. Jiang Chen sighed when he heard the words, but whatever, the daughter-in-law of the deputy factory director , life should be better, Jiang Chen also silently wished.

I comforted Ma Jun and told him something like "there is no grass in the end of the world, find another one...". , Jiang Chen knew that he still couldn't get over this knot, and so did Jiang Chen. In his previous life, he had a first love that he liked very much, and it is hard to forget even now. A ignorant first love is always so beautiful and so unforgettable.

In the following days, after hard work in the early stage, it finally entered the mature harvest season, and many products were basically completed, and now we are waiting for Jiang Chen to check and collect.

Let’s talk about the camouflage uniform military boots and the like, which have been produced for several days, and now all of them have been inspected and put into storage for storage, waiting for the military department to call a special train to transport the leather to the front line.

It was just dawn that day, and the whole B17 factory became lively. More than a dozen Jiefang trucks were mobilized from a certain automobile transportation company and drove into the factory. The military representative and factory leader Jiang Chen jointly checked whether the seal of the warehouse was intact, and then opened it. , The soldiers began to load the vehicles. Looking at the packs of camouflage uniforms wrapped in oiled paper, Jiang Chen was filled with hope. He hoped that these uniforms could reduce casualties and win more victories for the scouting heroes who were fighting on the front lines.

After the handover of military representatives, logistics personnel, and comrades from the Science and Technology Committee, they got the final payment and watched these vehicles leave. This matter finally came to an end. The printing and dyeing aspect of the entire service company basically stalled, but Jiang Chen still kept The basic operating speed is to try to run once a week to ensure the normal operation of the machine and the skilled workers.Jiang Chen, on the other hand, used the opportunity of printing and dyeing once a week to design new camouflage patterns. For example, last time it was a horizontal-striped hunter camouflage in the tropical jungle. Now he is experimenting with desert camouflage, grassland camouflage, urban camouflage, and mountain camouflage, etc.The selection of fabrics and coatings is also more sophisticated, such as abrasion resistance, scratch resistance, breathability, rain resistance (raincoat or mountain camouflage, designed for wind and rain, etc.), flame retardancy, and More advanced anti-infrared properties and so on have been tested, and good results have been obtained. I believe that these camouflage patterns will bring great help to Jiang Chen in the future.

There was no stagnation in the military boots either. Jiang Chen used a simple method. He invited an old shoemaker who had retired early from the shoe factory to do research. Jiang Chen gradually told him the knowledge and design he knew, and he led the two This old shoemaker has been dealing with shoes all his life. He knows what kind of shoes are comfortable to wear and what kind of shoes are good shoes.Jiang Chen's reason for doing this is simple, he is preparing for one of his plans, and he believes that these will bring him rich rewards in the future.

In terms of sniper rifles, they have also made great achievements these days. First of all, the barrels. Never seen such a nice barrel.Of course, these are also related to Jiang Chen's high standards. The workers have the initial impatience and contempt, and finally the slightest pursuit and admiration.

Now that the gun stock is over, let’s talk about the bolt. This device is the heart of the gun. Jiang Chen chose a semi-automatic rotary rear-pull bolt with moderate pulling force. He also made a proper anti-shock and decompression device, which is better than the shooter’s. The smoothness and comfort of the shooting can prevent the shooting accuracy of the bullet from being affected by the vibration of the shooter due to the excessive recoil force generated by the kinetic energy of the bullet at the moment of shooting.Each part of the whole gun is carefully crafted and polished by a master craftsman, and has been tested tens of thousands of times to ensure its quality and reliability.

Jiang Chen also worked hard on the gun stock. As I said before, Jiang Chen used two solutions, one made of wood and one made of aluminum alloy. Let’s talk about wood first. Jiang Chen really hired a factory to make the gun. The carpenter who has been working for many years makes the gun stock according to Jiang Chen's design. The wood he uses is also relatively good hardwood. The wood has been air-dried for more than two years, so as to ensure that the gun stock will be deformed due to the loss of water inside in the future. .Originally, the master wanted to paint the wooden gun stock, but Jiang Chen hurriedly stopped him, not to paint, which would destroy the original beautiful wood grain pattern of the wood.Looking at the gun stock polished by the master, Jiang Chen praised it very much. This is no longer a weapon, it is more like a work of art. Seeing this Jiang Chen suddenly had a plan, he was very excited.

Besides, the aluminum alloy gun stock adopts a brand-new design and process to ensure the quality of the gun stock. Since it is made of aluminum alloy as a whole, it is very light in weight.There is an integral bipod in front of the buttstock, and the bipod can be opened by pressing down on the tripod release button.The magazine has a capacity of 10 rounds and is also made of aluminum alloy with snap shoots on both sides of the magazine.There is a Weaver-type sight mount on the top of the receiver, which can be installed with various sights.But one thing is still not up to standard, that is, this part is turned by machine tool without using stamping technology, it may be heavier, if it is made with stamping technology, it should be much lighter, so this is just a mother gun, only for experimental purposes, The real production still needs to use stamping technology.

Finally, there is the old problem, the sniper scope, which has always been our shortcoming. In order to overcome this difficulty, Jiang Chen and the people of the G13 factory have thought of many ways. After many experiments, they finally overcome these problems. The new sniper scope The magnification is adjustable from 5 to 35 times. The total length is 380 mm, the diameter of the tube is 30 mm, and the diameter of the objective lens is 45 mm.Due to the current technical limitations, we can only do white light aiming. In the future, we will do other things, such as infrared night vision and so on.Finally, G1100 has also passed a professional test. I won’t talk about the specific data. There will be too many people who can’t understand it. If you don’t believe it, do you know how much one mil is equal to?If you don't know, find Du Niang!Then let me give you a general idea. Even the best lenses have errors, not to mention that they are purely hand-polished. Due to these errors, the objects seen from the scope are deviated from the actual objects, but they can be controlled. In a certain range, this scope is within the acceptable range, and the error of about one kilometer is about 13 meters, which is a relatively good result.

The next step is the exciting turnaround time. After several days of modification and exploration, the assembly is finally completed. You must know that this kind of modular design and production will take place in the next ten years. Now the production will inevitably have errors. But it is already very good. Seeing that the two guns that have been assembled are placed in front of everyone, a total of three guns are placed in front of everyone, which makes the people who come to watch excited. , the most serious ones are Ma Jun and Dongzi, who are arguing about the first bomb.Jiang Chen also worked hard on these two guns, such as the floating barrel and the special shock-absorbing bipod, etc., were all designed and manufactured under Jiang Chen's insistence.

Jiangchen named the wooden buttstock High Precision Type 1. The whole gun has a total length of 1250 mm. The weight of the whole gun empty is 6.2 kg. The caliber is 7.62 mm. It uses Western standard 7.62x51mm bullets. The magazine is hidden in the buttstock. Among them, it can hold 10 rounds of ammunition. Of course, I have already mentioned the scope above, so I won’t repeat it.However, this gun does not use the above-mentioned floating barrel, but only uses a special shock-absorbing bipod.But Jiang Chen believed that the accuracy of this gun was also very high, and he was confident in what he designed and manufactured.

The aluminum alloy Jiang Chen is named High Precision 2. The whole gun has a total length of 1150mm, the weight of the whole gun empty is 7.1kg, and the caliber is 7.62mm. It also uses Western standard 7.62x51mm bullets. The magazine can hold 10 rounds of ammunition. Of course, I have already mentioned the scope, so I won’t repeat it.It is worth mentioning that the modified gun uses the floating barrel technology, which is independently suspended and fixed in front of the machine gun housing without hindrance, so that the hit rate can be improved accordingly.It is also worth mentioning that Jiang Chen also designed a silencer for this gun, which can be disassembled freely. Although the designed silencer is very simple and cannot allow the sniper rifle to fire bullets in complete silence, it can effectively Minimize muzzle noise.Under normal circumstances, the sound of sniper rifle shooting will be drowned by the sound of various weapons on the battlefield, but if the sniper is shooting at the enemy alone in the forward position, a silencer should be installed to reduce the chance of being discovered by the enemy. opportunities to reduce casualties.

The next step is the comprehensive testing stage. I don't know if these two guns can accept the test and whether they can meet the expected design goals. Jiang Chen is full of hope for them. Seeing that the time for the exercise is getting closer, he will I don't know if it can be completed on time. This is related to whether Grandpa can keep his beloved Hong Kong dollar and the honor of the entire Northwest Theater. Jiang Chen also knows that the million-dollar disarmament is not far away. If he fails again this time, If it is done, the prerequisites for the hundreds of thousands of troops in the Northwest Theater are worrying. He suddenly feels that the burden on his shoulders is heavy!
PS: Whether the two guns designed by Jiang Chen can pass the rigorous test, please read the next chapter, it is guaranteed to be exciting and absolutely free of urine.The time to write this chapter was completed at 2015:8 am on August 27, 1, and it will be revised and released on a regular basis. It is estimated that it will be more than two o'clock when it is finished. It is very hard. Everyone has to ask why it takes so long. It's really hard to write, I have to check a lot of information, so as to ensure that there will not be too many loopholes, brothers and sisters (I don't know if there are any, I kind of leave a message on the book review and I will pull you as a group flower), look For the sake of my hard work, please collect it, and all kinds of tickets will hit me! ! ! !

(End of this chapter)