Military industrial hegemony

Chapter 254 Dismantling Pioneer Factory
As the corporate restructuring continues, another thing is going on in parallel.What, that is the splitting of the original two production plants.In fact, this matter has been implemented before, but it is not as detailed and formal as this time.Coupled with the money Fatty got from Southeast Asia this time, Jiang Chen had the confidence to start a plan that he had been thinking about for a long time.

When the company was reorganized, Jiang Chen felt that the status of the two factories, to be precise, the pioneer factory was too high.It is almost at the same level as the company's production department, and this is not conducive to the company's management.Fortunately, the garment factory is relatively easy to manage because its functions are relatively simple.But Pioneer Factory is different. It involves too many departments and fields, and the power of internal departments overlaps with the functional departments of the company.Another one is that Jiang Chen plans to upgrade the industry. He began to think that the various departments of Pioneer Factory should be split into various subsidiaries or factories, or some factories and companies in which the company holds shares.

For example, the previous tire or wheel production workshop, after the development of Jiang Chen, has now become an independent workshop specializing in the development and production of tires and wheels.In other words, it has become an independent factory that produces tires and wheels, but it has not become independent and has always been a subordinate unit of Pioneer Factory.Now Jiangchen is upgrading it, raising its status to that of Pioneer Factory or motorcycle factory. Of course, part of this is caused by the downgrade of Pioneer Factory.But generally speaking, they are now in an equal-level relationship. Pioneer Factory can no longer order the tire factory. In the future, their cooperation will also be carried out in accordance with normal business cooperation between enterprises.Both factories have independent profit systems and are directly responsible to the company's financial department.After the new tire factory is established, part of the funds will be injected by Jiang Chen for industrial upgrading.The tire factory in the future will not be satisfied with only producing motorcycle tires or all-terrain vehicle tires, but may also produce other tire products in the future.It's not just about cooperating with the company's factories. After ensuring the needs of the company's factories, the remaining production capacity will be turned to the society, so as to avoid idle waste of resources. However, this situation should not happen, because Jiang Chen and the others have another big project to mounted.

Next is the motorcycle electronics production workshop, which was provided by the supplier before, but after the annual inspection failed last year, Jiang Chen and the others invested in their own electronics factory, specializing in the production of electronic equipment on motorcycles.Now this factory has also been invested by Jiang Chen and the others. Yes, the capital injection, to be precise, this factory is a factory independent of Jiang Chen and his previous service company.Now, due to business needs, Jiang Chen injected capital in the name of Western Industry Co., Ltd. to allow it to carry out industrial upgrading and transformation.The future goal is to aim at the production direction of electronic equipment in the car.And for the better development of this factory, Jiang Chen also pulled it into the company system, so that it will have the help and support of the electronic component research and development laboratory jointly owned by the company and B17 factory, and I believe it will shine brightly in the future.

There is also the steel processing workshop. This workshop originally produced motorcycle frames and various metal components, etc., and now Jiang Chen has independently established it as a factory specializing in the production of metal components for vehicles.In the future, after Jiangchen and the others inject funds and undergo a series of industrial upgrades, it will not be able to meet the project orders that only produce metal components for motorcycles and all-terrain vehicles.In the future, it will be mainly engaged in the research and production of automotive steel for various models, and will also become bigger and stronger in this field.There is a plastic factory that is the same as this one. Before this, it only produced some motorcycle shells and some all-terrain vehicle shells.Even so, Jiang Chen also separated him and set up a production factory specializing in the production of automotive plastics.After the upgrade, its future business will be the same as that of the automotive steel research and production plant, which will develop and produce automotive plastics for various vehicles.

Below is the engine factory, which Jiang Chen also made independent.However, this independence is somewhat complicated, that is, Jiang Chen also split the engine production workshop into two parts.One is the engine factory, and the other is the gear bearing factory that was dismantled from it.That's right, it specializes in the production of gears and bearings.Although these two things are small and common, they are very important to engines, even vehicle manufacturers, and even the entire industrial production system.At this time, there was no domestic manufacturer specializing in the production of this type of product, and Jiang Chen was the first of its kind.And even though this thing is small and ordinary, the technology it contains is quite high.This involves material science, that is, the refining of special steel.Because ordinary steel cannot meet the strength and wear of these bearings and gears.There is also the heat treatment technology of this material, which is also a very advanced technology.How to overcome the high temperature generated under high-speed operation is also a difficult problem on the side of the material itself.

Below that lies the challenge of processing the material.The processing of gears and bearings requires very high precision, which is required to be in the range of millimeters, millimeters, millimetres, or even micrometers (1/10mm in silk meters, 1/100mm in millimetres, and 1/1000mm in micrometers).So this is a very time-consuming and labor-intensive project.But this is also an essential project, because we use it in many product production equipment and our usual production.So this is also a research and production project that can be made bigger and stronger.Of course, Jiang Chen couldn't afford it with his current ability, so he brought in the B17 factory as a joint-funded production plant and R&D laboratory to meet its long-term production and research projects in the future.

Of course, this engine production plant also has to be said, this engine production plant is also independent.In the future, it will rely on the engine research and development laboratory to undertake the development and production of various engines.Of course, it is not only in motorcycle engines, but in the future, automobile engines, marine engines, industrial engines and so on may be developed.And it's not just gasoline engines, diesel engines, hybrid engines, new energy engines, etc. may be developed in the future.Moreover, in the future, we will not only develop single-cylinder or two-cylinder engines with small and medium arrangements, but also develop and produce multi-cylinder, multi-type and large-displacement engines to meet the needs of the company's various production projects.Even if the company no longer needs it, it can be sold as an independent product to domestic and foreign merchants and users.

Of course, there are still many changes to this, such as the glass product factory evolved from the optical laboratory and production workshop, and the paint R&D laboratory established on the basis of the printing and dyeing factory and the company's paint workshop, etc.I have some time, so I won't introduce them one by one.Having said so much and done so much foreshadowing, you all know what I should produce next.

(End of this chapter)