industrial overlord

Chapter 505 Private Meeting
"What? Hong Zhimin doesn't dare to take care of it?" Han Yuren asked Pan Jilong with a face as black as coal.

Pan Jilong hesitated and said: "It's not that he doesn't dare to intervene, but that the other party has done things more carefully, and Hong Zhimin can't find the other party's fault. He said that he should not favor us too clearly when talking about the rule of law now." .”

"I'm sure the few people you've hired are not doing things cleanly, and you've left a clue!" Han Yuren said. Afterwards, he heard Pan Jilong say that Dai Xiaoming and his team were hired to handle the errands, so he already knew it in his heart, and knew that the matter was not done properly.

As the general manager of a large company with tens of thousands of people, it is impossible for Han Yuren to know every worker, but he has heard of people like Dai Xiaoming. As a regular worker and a child of the company, the HR department is not easy to handle.It would be a miracle to find such a group of people to handle the matter, and it would be a miracle if it didn't fail.

"However, I don't understand what Hong Zhimin said to me. When I asked him, he said that there are discipline rules and he can't say more." Pan Jilong said.

"What?"

"He said that store is not our home."

"What do you mean?" Han Yuren asked in surprise, but he quickly realized, "Xiao Pan, the place you chose is indeed not good. You also know that store, which is set up next to our company by a certain department." It's really not appropriate to fight there."

"Well, I mainly think that there is only one fat man from Hanhua, so it is more convenient to deal with. If Lin Zhenhua gets beaten, the impact may be too great." Pan Jilong explained.

"This Lin Zhenhua is really deceiving people too much!" Han Yuren said bitterly.

"So, Mr. Han, what should we do next?"

"After spending time with him, I don't believe that he, a dignified chairman, has so much time to stay in Xingbei. Let's stop calmly and let him retreat in the face of difficulties."

"I understand, Mr. Han." Pan Jilong bowed and exited Han Yuren's office. When he got outside, he curled his lips: What a bragging, it makes people run so hard that they dare not even leave the door. move!Sigh, forget it, who let me follow such a useless boss?
Not to mention Han Yuren's self-deceiving and quiet braking, Lin Zhenhua is also not idle here, besides his rich and colorful spare time life, he unexpectedly caught up with a beautiful girl in her 20s from nowhere, and at this time she was following her The other party was wandering around the alleys of Xingbei City.

"Girl, where are you going to take me?" Lin Zhenhua asked the girl next to him with a smile. He didn't think it was hard to go shopping like this at all with a beautiful woman by his side.

"Soon." The girl replied simply.

After turning around several small alleys, they finally arrived at their destination, which was an old apartment building built in the 60s. The family they were going to lived on the sixth floor.

"Here we are, Mr. Lin. This is my sister-in-law's house. My father is waiting for you in the house." The girl opened the door and said to Lin Zhenhua.

The house is small, but it looks very bright.In the living room, an old man in his 60s was sitting. Seeing Lin Zhenhua coming in, he quickly stood up and came forward, apologetically saying, "You are Lin Zhenhua, Mr. Lin, right? I'm Zhang Yuquan."

"Hehe, Mr. Zhang, I finally saw you. You see, it looks like a spy meeting." Lin Zhenhua smiled and shook hands with Zhang Yuquan, and then both sides sat down as guest and host.

Zhang Yuquan's younger sister also ran out to greet Lin Zhenhua, poured water for them, and then hid in the back room.

"Mr. Lin, I heard that you have been waiting for me outside the gate of Xingbei Heavy Machinery. I have been waiting for five days. I am very touched. Oh, there is no way. You know Mr. Han. I am not good. Contradict him directly. No, I will ask the girl to find you and bring you here to meet. If you go directly to our company's family area and let others see it, it will be a bit troublesome for me to pass it to Mr. Han. "Zhang Yuquan explained his actions.

Lin Zhenhua said: "Mr. Zhang, Minister Shen of the First Ministry of Machinery recommended you to us, saying that you are an authority on hydraulic presses, so we must find you. As for waiting five days, it is nothing."

"Minister Shen is absurd." Zhang Yuquan said modestly.However, Zhang Yuquan is very proud to hear that Shen Hong has always remembered him: "When I was working on the [-]-ton hydraulic press, I helped Minister Shen, and he taught me a lot. In fact, there were other experts who participated in that project. There are many, but after so many years, almost all of them have retired. I am the youngest, and I have to retire after two years."

"Zhang Gong, if you are being polite, we don't need to say more. I just want to make sure that after so many years, have you abandoned your major? In other words, are you sure you can get a 1.5-ton hydraulic press?" Lin Zhenhua asked straight to the point.

Zhang Yuquan said: "In the past few days, I heard that Mr. Lin came to me because of this matter. Although I didn't come out to see you, I did read some materials at home. I think that if we still follow the old Shanghai TV The design of the hydraulic press is only to increase the pressure from 1.2 tons to 1.5 tons, and I am still sure."

Lin Zhenhua smiled slightly: "If what you said just now, what if it is another design?"

Zhang Yuquan said: "The hydraulic press in Shanghai was considered a remarkable innovation back then, but judging from today's technology, there are still many regrets. I think that if we want to build a new hydraulic press, and the pressure will be higher than the original 25%, it is best to modify the design."

"Mr. Zhang, please tell me." Lin Zhenhua said.

Zhang Yuquan pushed away the coffee table in front of him, then took out a blueprint from behind, and spread it out on the ground.Seeing this, Lin Zhenhua also stood up from the sofa, walked to Zhang Yuquan, squatted down with him, and looked at the blueprint.

This is a schematic diagram of the structure of the hydraulic press. This "three beams and four pillars" appearance is very familiar to Lin Zhenhua.However, the content contained in the same appearance is completely different for the layman watching the excitement and the insider watching the way. This requires Zhang Yuquan to explain to Lin Zhenhua:
"Mr. Lin, look, our old 70-ton hydraulic press uses circular columns. The advantage of this type of column is that it is simple in structure, but the disadvantage is that the gap cannot be adjusted, and the guiding accuracy is low, which leads to poor positioning accuracy of the moving beam. , which will directly affect the precision of the forging. I have seen from the data that since the late [-]s abroad, there have been square column plane adjustable gap guide structures, and I marked its sketch here."

As he spoke, Zhang Yuquan pointed to a corner of the drawing and showed Lin Zhenhua the section of the square column he envisioned.

Lin Zhenhua thought about it for a while, and then said: "Zhang Gong, I understand it this way, do you think it is right? Forging machines are different from other processing equipment, that is, forgings are in a high temperature state, and strong heat radiation will be emitted on the forging machine , leading to an increase in the temperature of the structural parts of the forging machine. Due to the effect of thermal expansion and contraction, the original gap between the columns will change, thus affecting the precision of the forging operation. The square column you designed has an adjustable gap , so whether it is cold work or hot work, as long as the clearance is readjusted, the accuracy can be guaranteed to remain unchanged.”

"That's right, Boss Lin is really an expert!" Zhang Yuquan patted Lin Zhenhua's shoulder excitedly. At this moment, he really regarded Lin Zhenhua as a bosom friend.

Lin Zhenhua waved his hand and said, "Mr. Zhang is over the top. I just imagined it from the situation you just introduced. If you didn't tell me, I wouldn't have thought of it at all."

"Boss Lin is so young, he is able to make a company so prosperous, and he is also so proficient in technology, he is really a rare talent. Alas, it's a pity..." Zhang Yuquan shook his head and said.

Of course, Lin Zhenhua could guess what he meant by pity. He must have lamented that Xingbei Heavy Machinery did not have a boss as outstanding as Lin Zhenhua.Lin Zhenhua had read Han Yuren's profile, and knew that he was actually quite aggressive when he was young, but as he became a bigger official, he gradually became lazy.Due to the high status of Xingbei Heavy Machinery in the domestic equipment manufacturing industry, Han Yuren's arrogance is growing day by day. He neither listens to different opinions nor is willing to cooperate with brothers. The situation of Xingbei Heavy Machinery is already going downhill. .

"Mr. Zhang, you can continue on." Lin Zhenhua said.

"Well, let me continue. Mr. Lin, look, these two are the upper and lower beams of the hydraulic press. It turns out that we used a split structure, casting each part separately, and then splicing them together. The biggest defect of the split structure is that Insufficient strength, the contact parts between the combinations have undergone high-intensity collisions for many years, and damage will inevitably occur in the end. This beam is more than 300 tons. If there is structural damage, the hydraulic machine cannot be used at least, and the most serious A major accident involving plane crashes and fatalities."

"So, according to your meaning, you want to make it a whole structure?" Lin Zhenhua asked.

Zhang Yuquan said: "That's right, the upper and lower beams are all made into an integral structure, and a whole piece of iron weighing more than 300 tons will not cause problems no matter how impacted it is."

"Mr. Zhang, this seems to be a bit difficult." Lin Zhenhua grinned like a toothache.

Of course, an integral component weighing more than 300 tons can only be formed by casting.Lin Zhenhua is no stranger to casting. It is nothing more than pouring molten iron into a sand mold. After it cools down, the castings can be obtained by removing the sand.However, for these more than 300 tons of castings, four or five ladles are needed to cast them. The sand mold is more than ten meters long, and the height and width are respectively four or five meters. OK?

Zhang Yuquan saw Lin Zhenhua's thoughts, and he said: "This kind of large casting of more than 300 tons, we couldn't do it in the past, but now some factories can do it. We Xingbei Heavy Machinery have also made 3 packs of combined castings. It weighs more than 200 tons. So, I don’t think it’s technically a problem.”

"Okay! Since someone has done it, we can give it a try. At worst, it's just a tuition fee." Lin Zhenhua said through gritted teeth.

Zhang Yuquan seriously corrected: "Mr. Lin, you can't have the mentality of paying tuition fees. Casting such a large component of hundreds of tons, if the process is not strictly designed, there may be a major accident. It is not only It is a matter of hundreds of tons of iron, and if there is an explosion, the entire workshop may be destroyed."

"Don't worry, if we really want to cast such a large workpiece, we will definitely ask experts to demonstrate it repeatedly." Lin Zhenhua assured, "Okay, Zhang Gong, you continue."

(End of this chapter)