Global Wasteland: My Mechanical Fortress

Chapter 106 Overcoming Difficulties, Copper Wire!
Lin Fengyi glanced at the World Channel, and then satisfactorily began to watch his own private system prompts:
[You have successfully produced a direct current generator, reached the milestone of the ancestor of electric energy, and obtained the skill reward: Overload]

[Get 1000 achievement points]

[Gain 6000 experience points]

【Ancestor of Electric Energy】

[When wearing this title, the efficiency of all electrical equipment in your shelter will increase by 15%]

……

[Overload] (active skill)
[All the electrical equipment you make can be overloaded, and get a 30% efficiency bonus when consuming double durability]

……

[You have unlocked the production specifications of the DC generator]

【DC generator】

[Pre-requirement: Studio]

[Material Requirements: Copper Wire*0.1; Iron*0.3 Magnet*0.5]

[Note: The quality of the material will affect the quality of the generator, please use high-quality raw materials! 】

……

[DC generator] (inferior)

【Maximum generating power: 480w】

[Durability: 85/85] (Factory new)

[Evaluation: Although the actual function of this generator is limited, it also represents that your civilization has entered a new era! 】

"The power of 480w..." Lin Fengyi looked at the properties of the one-meter-high DC generator in front of him, unable to say a word for a long time.

Although he thought that the power of the direct current generator he made would be average, but he didn't expect it to be so average...

……

But this is also a reasonable thing.

After all, the quality of the copper wire he produced was too poor, if Lin Fengyi could produce industrial-grade copper wire like Blue Star.

He can wind copper wires layer by layer to make a coil winding as a stator.

Then spin the magnets at high speeds, and you've got an alternator!
After all, under the same volume, the power of the AC generator is much higher than that of the DC generator!
And Lin Fengyi's refuge has a god-level plug-in called Psionic Heart!
The spiritual heart can directly absorb any form of electrical energy without any transformation, and there is no need for additional accessories such as transformers!
……

Lin Fengyi was very satisfied after looking at the title of [Ancestor of Electric Power] and the skill [Overload] that he just got!

Especially the skill of overloading is a magical skill to increase production capacity in an emergency!

"Have any problems been solved, milestones and skills have been obtained, and then it is time to solve the problems!" Lin Fengyi began to set the next stage of development goals for himself!
……

Lin Fengyi has now saved enough [-] units of fine gold to upgrade the town center to the Protoss hub.

However, there is still a shortfall of seven hundred points in spiritual power.

Now Lin Fengyi has no shortage of defensive strength, and he will soon have enough experience to accumulate [-], so he stopped all work on the Psionic Furnace and started accumulating psionic energy!
Lin Fengyi can now produce about 400 points of psionic energy a day.

Without the consumption of the big energy furnace, Lin Fengyi would be able to accumulate a thousand points of spiritual energy in a little over two days!

During the period of accumulating psychic energy, Lin Fengyi did not waste time. He began to dig out the books "General Knowledge of Machinery and Basic Skills of Fitter", "Textbook for Metalworking Practice" and "Practice of Manufacturing Technology" to continue learning materials Processing knowledge!

【Learning primary material processing...】

【学习进度：5%……35%……60%……85%……100%……】

After learning basic material processing, Lin Fengyi has mastered the method of making copper wire.

If you make copper wire by hand, you generally use a prop called a "drawing board".

This kind of prop is generally made of metal with high hardness, and then there are wire drawing holes of various diameters on it from large to small.

Want to manufacture high-quality, thin-diameter wire.

First of all, the metal needs to be heated and beaten into strips; then the metal is heated again, and the wire drawing holes on the wire drawing board are passed from thick to thin over and over again.

Until the wire is drawn to the diameter you need!

The metal wire produced by this method is a high-quality wire that can achieve basically the same diameter, roundness, internal metallographic structure, surface finish and straightening degree!

……

Drawing boards have very high precision requirements.

If Lin Fengyi made the drawing board by himself, it would be very troublesome, and the accuracy could not be guaranteed.

So he took out [-] individual crossbows and hung them on the national foreign trade section of Tool Nation, and then posted an advertisement on the World Channel:
“【单兵连弩】换购四排52孔，直径区间0.26mm-4.10mm和二排20孔5.1mm-7.0mm规格的拉丝板！

Redemption address, trading section-national foreign trade-Tool Nation, the number of Liannu is limited, first come first served! "

Blue Star is so big!
There must be many metalworkers who came to the wasteland world directly while they were in working condition. Lin Fengyi believed that he would be able to exchange for the drawing board he needed!
"Damn it, single-handed crossbows! Do all the tricks use automatic weapons now?"

"What is a drawing board? This is the first time I've heard of it..."

"The wire drawing board is a metalworking tool, it can pull metal wires! The technique is very important, so it must be because he wants to upgrade his generator?"

"People are more popular than people... I have just passed the Stone Age, and the giants have already entered the Electric Age..."

"Damn it, I also want a single-armed crossbow, but I don't have a drawing board..."

"I have it, I have it! I'll change it right away!"

"I'm envious of the brothers upstairs..."

……

[Get drawing board*1]

[Get drawing board*1]

……

Only ten minutes after Lin Fengyi's advertisement went out, he sold the [-] individual crossbows he had just hung up and replaced them with [-] drawing boards of various colors!

Among them, 0.26mm-4.10mm and 5.1mm-7.0mm each have fifteen pieces.

These Blue Star Industrial creations are temporarily rare objects that cannot be reproduced temporarily, so Lin Fengyi changed a little more and stored them, so as to be prepared!

After getting the drawing board, Lin Fengyi officially started to make high-quality copper wire!
The blacksmith shop is the last link, responsible for smelting copper ingots, and initially casting copper into copper rods as thick as little fingers!
Then Lin Fengyi put the copper rod into the furnace to heat and calcinate.

After the copper rod is heated, put the copper rod on the anvil with a small hammer, stretch it and tap it into the inside until the copper rod is made into a copper wire with an uneven diameter of about seven or eight millimeters.

Heat these copper wires again, and then pull the copper wires according to 7.00mm-6.90mm-6.80mm... and so on, until the copper wires finally become 5.00mm!

After the high-quality copper wire is pulled, the next step is to give the copper wire a layer of insulation and transform it into an "enameled wire".

At Blue Star, materials such as polyesterimide, polyester and ethyl formate are generally used as insulating skins.

But with Lin Fengyi's current conditions, it is obviously impossible to make these things to dress the copper wire, so he chose another very common item instead!
　There was a logical error before this chapter, and I only discovered it when I published the book, so I deleted everything I wrote before...

　　
　
(End of this chapter)