Douluo starts with pea shooter

Chapter 628 New Model

In front of Lan Nuo is a brand-new mecha with a height of about five meters. Although the shell has not been assembled yet, the round machine looks a bit hideous, but it is already quite imposing. The cockpit opens upwards, and the driving method is different. It is still mental control and motion capture, which cooperate with each other, but because of the chip and the auxiliary calculation, the operation is more flexible.

It is also a series of tests, tests, learning, the time required to manipulate this skill, and the extent to which it can be manipulated after the learning is completed.

Before Lan Nuo came here, someone had already tested it, but most of them had already tried mecha driving, so it was the first time for people who had not participated in the design of this mecha to test it. .

It is true that Lan Nuo did not participate in the design of this mech. During this period of time, he was busy working on the chip, and only this posture auxiliary control system was the operating system he helped to build. The subsequent testing and debugging were not done by He's done.

The local scientists in this world can rely on their own strength to produce mechas of this level, which can be regarded as they have mastered a new scientific research model.

After Lan Nuo boarded this mecha, the first thing he felt was that it was close to the body. The driving comfort itself is also one of the important requirements for the performance of the mecha. If the driver himself feels very uncomfortable, then during the battle For example, if the shoes are one size smaller than normal shoes, then there is no way to fight normally, and this set of mecha is not specially designed for him, but it is very uncomfortable when he wears it. When it was close to the body and entered the armor, he paid attention.It was only then that it was discovered that the internal cockpit of this mech could be adjusted.

There are a large number of knobs that can adjust the position of the sensors inside each cockpit, so as long as there is a new driver entering, as long as there are its relevant body parameters, manually adjust according to the body parameters, the internal driving of this mech The shape of the cabin can fully conform to the shape of the driver.

This design is actually very critical, and it is one of the necessary designs for the mass production of mechas. Without this design, the mass-produced mechas will have to be divided into different models, and there will always be some models that people can't understand. Adapt, that is, the mecha is picking the driver, not the person picking the mecha.

Another point is that the body shape of the pilot itself is not constant. For example, if a child is driving a mecha, then after he grows taller, the original fit mecha will not fit so well if he continues to wear it.

It is even possible that there are pilots who have lost weight successfully or gained weight in middle age. This is all possible, and when they are driving, they finally bought a mecha and brought it home, but they cannot drive because of their body changes. , then the moths will make a big fuss.

In addition, Lan Nuo also noticed that there are a lot of values ​​on the operating system panel of this mecha, and there is a display similar to a blood bar to intuitively display the status of his mecha.

This is very convenient for people who are driving a mecha for the first time. Not everyone can judge the damage of a mecha by the performance changes when operating the mecha. An intuitive and visible blood bar can make people understand Do you want to go up and make a fuss next time, so that people will know when to run away.

After entering the mecha, the upper cover will fall down. At present, the upper cover is still hollowed out, so the driver's body can be seen directly from the cover, but this is only a prototype.This shelf is also to a certain extent, in order to reduce weight, in the real finished product, this bracket will be covered with armor, and even some special models, the shell of these armor will consider its airtightness.Special types of mechs will take into account the possibility of fighting underwater, so sealing must also be considered.

There is no need to test the prototype. It just does not cover the shell, and you can clearly see the operation of various internal parts.

"Try to walk. There is no need to consider factors such as the instruction manual. What we want to test is whether people who come into contact with this mech for the first time can drive it smoothly.

Sometimes on the battlefield we may drive the mechas of comrades who died in battle, and some people who have never been in contact with mechas may also become temporary mecha pilots. "

Lan Nuo nodded, and then controlled the prototype machine to move forward. Following his steps, he found that the control of this mecha was much easier than he imagined. During the process of his control, the mecha Without any inconvenience, without knowing any relevant skills, just relying on the instinct of the body, this mecha can make almost all movements according to its own body movements.

At least there is no problem with walking.And even if he is running, he is very coordinated and will not fall suddenly.

"Now it's about jumping. You have a series of obstacles in front of you. You need to jump or go around them. Try as fast as you can.

Use any action you can imagine to cross these obstacles, test the performance of the mech, and test the dead angle of some actions.This mecha has some actions that cannot be made, which requires a series of tests. "

Lan Nuo entered the testing field without hesitation, and hurdle-like things rose up in the testing field.These obstacles can try to cross from above, or try to drill through from below. Of course, they can also go around from the side in theory, and it will take longer.

Lan Nuo first tried jumping. Although the mecha is huge and heavy, there is no problem in jumping. It can easily jump to a height of three or four meters.This is stronger than the jumping ability of ordinary people, close to the jumping ability of ordinary soul masters, although it is much worse than that of high-level soul masters, but the mecha does not have full power output.If the full power is output, the jump height should be higher.

But then there is no need.If you jump so high, you will show your flaws.

During jumps like that, there must have been other attitude aids controlling it.

The duration of the jump is calculated according to the acceleration of gravity, not proportional.Therefore, if an ordinary person falls from his own height and a mech falls from his own height, the time it takes is completely different.

Getting over these obstacles doesn't look too difficult.The first two obstacle mechs jumped very high.I'm afraid I won't be able to cross it.The ones behind did not jump as high. After a few attempts, the mecha almost brushed over these obstacles.And there is no difficulty in controlling this precision.

After getting used to jumping, he was going to try to get under these obstacles.So try to make the mecha squat down.I thought it would take too long to squat down and walk in small steps.So I chose to use the posture of kneeling on the ground, which is like the posture of a winning player celebrating on a football field, sliding forward and crossing.

And when he posed this pose, he discovered the position of the mecha's toes and knees.It is possible to pop out the wheels.As he made this movement, while his body was leaning back, the two wheels were in direct contact with the ground to maintain its balance and keep its speed from dropping.

Although this is a function that normal humans do not have.But there is no obstacle to control.It's very intuitive to control.He kept his upper body leaning back like this.The latter adjusts its own center of gravity and adjusts the direction of advancement.Go under one obstacle after another.But it did not hit the borders on both sides of the obstacle.

And he discovered that this wheel can be controlled by his own mind.Controls how fast it turns.When it needs to accelerate, it can also actively accelerate.This is a pretty good way to go at high speeds on relatively flat ground.Accelerating to the limit on flat ground, the speed can be faster than normal running.

Lano tried to stand up again.And when he made this attempt, the wheel also cooperated with it to reduce its rotation speed.Although he was still gliding forward, he stood up from his kneeling position as if he were on flat ground.This is by calculating the acceleration to simulate a general effect on flat ground.He originally thought it would be troublesome to switch back to the original posture in this gliding posture.It's like ordinary people wearing roller skates.If you rely on your knees to lean on the wheels on the ground to slide.To regain a standing posture without relying on the hands to support the ground, considerable skill is required. You need to learn to use one leg and knee to maintain your balance, and the other to step on the ground.

But driving a mech has no such effect at all.With the speed at which the wheels spin adjustable, there is little need to maintain balance.It's like being on the ground.Just be responsible for standing still.

After trying to stand up successfully, there are more other tests of posture.For example, perform a front flip.Obstacles can also be bypassed in this way.And this difficult posture is also a considerable test for the performance of the mech in all aspects.A person who has never been in contact with the pilot of this type of mech before.Want to successfully complete somersaults in the test of this process.You don't just need to master this skill in reality.It also needs mech designers.It is possible to restore this technique on the mecha.This is quite difficult.But fortunately, this difficult action was also successful.

Including handstands, backflips.These are more exaggerated movements.Mecha can also be done.

"Okay, the control of the basic actions has been basically completed. Then the next step is to control some special actions.

I don’t know if you have noticed that this generation of mechs is different from the one you made, we enlarged its size.In the original transmission device of the generation you made, the driver's arm also penetrated into the arm of the mech.Although it doesn't go deep enough, it's not like wearing a suit of armor.But it also affected the mecha's movement space to a certain extent, so that he can only make actions that normal humans can make.

But this time, in our design, the cockpit is completely located in the torso of the mecha.Only when actions such as bending are required will affect the driver's driving space.When performing sports actions, the driver's limbs are not in direct contact with the limbs of the mech.This is a manipulation that relies on other transmissions.

This also means that the limbs of the mech can make a series of actions that the human body cannot.For example, anti-key operations.Or the arm spinning like a windmill.It is impossible for a normal person's arm to turn like this.But mechs can.Even a twist at the waist can be done.Achieve the effect that the lower body does not move, but the upper body turns 180 degrees.In theory, if you want, your upper body can also rotate like a windmill.This is also a rather special attack mode.While the upper body is rotating at high speed, if you are still waving a weapon in your hand, it can form an effect like a blade storm.

And the special control mode in this aspect also needs to cooperate with the driver and try to test it.It's not just the rotation system that's trying to test here.There is also a visual aid system. "

Lan Nuo didn't expect that when designing the mecha, these guys also considered the anti-joint design.Take advantage of the advantages of the machine itself.Can not be limited by the original joints of the human body.He is very interested in this function, and he didn't even design a similar function when he tried it.

And after he boarded the mecha, he also felt the power of this thing. When the arm rotates at a high speed, it can perfectly use the inertia of the arm.The speed of rotation can be like a windmill, like two huge chainsaws, which can almost smash everything in its path.

The content of the test is to maintain balance in this state.And in the case of the arm hitting an obstacle, whether the program response made by the mecha can assist the driver to maintain balance.This is also the hardest part.Because the driver can't do this kind of action at all.So I don't know how to keep the balance in my mind.Everything depends on the designer's design.And the auxiliary calculation of the program.

And it turns out that this project is indeed quite difficult.After the high-speed rotating arm collided with the obstacle, the mech immediately lost its balance. Normally, without any assistance, this kind of impact would definitely not be able to maintain balance. When it hit an obstacle, Mecha Yi shook for a while before regaining his footing.

Lan Nuo estimated that the gyroscope technology of these people is not very perfect. Although they can calculate how to maintain balance to a certain extent, there must still be a series of problems in terms of execution.

[To be continued]

Ask for collection, ask for recommendation ticket~
　Ask for a ticket~
　　
　
(End of this chapter)