Countercurrent 1982

Chapter 45 Accidental Discovery

Chapter 45 Accidental Discovery
As soon as Tian Feng changed into his work clothes and sat in the office, the warehouse statistician sent a form to his desk.

According to the regulations of the factory, after the warehouse management has counted the number of finished products produced by each worker and put into the warehouse, Tian Feng, a technician and quality inspector, will conduct quality inspection and random inspection. in a summary of individual workloads.

Usually Tianfeng just simply follows the procedure for this kind of spot check. After all, after the product has been inspected by full-time quality inspectors, it is basically difficult to pick out substandard products. Therefore, in the past, Tianfeng just glanced at it, and then reported it in the report. Just sign your name below and turn it over to Director Wang Qiang.

He took out a pen from his pocket, and when Tian Feng was about to sign it directly, he found that the production quantity of one station in this report was very exaggerated.

The chart clearly shows that the number of finished products processed by the same components in other stations of this team is around 732 to [-], and the number of finished products after the label of this station shows [-]!
Tian Feng thought he saw flowers, so he took off his glasses and rubbed his eyes, but when he looked at the numbers in this column again, it still showed 732!
"Old Lu!" Tian Feng raised his head and shouted, but found that the warehouse statistician who sent the form had left the office.

"What is this!?" Tian Feng was a little angry.

Tian Feng is responsible for the second review of the finished product quality inspection and quantity verification produced by the daily workers. If the number of finished products is seriously inconsistent with the actual production volume of the workers, he will also be held accountable by the leaders. Although the responsibility is not large, the deduction A certain bonus is definitely not run.

In Tian Feng's view, there is generally little difference in the number of finished products produced by each station in the same team in a day, and the maximum output of apprentices and skilled technicians is only one or two times. However, the station marked NO. It has produced more than 13 finished products, which is more than ten times that of others, which is obviously unreasonable.

Fortunately, Tian Feng took a second glance and did not sign directly. Otherwise, once the report was signed and handed over to Director Wang Qiang, he would be punished if he didn't do well.

Picking up the report, Tian Feng left the office angrily and walked straight to the warehouse.

At this time, at the door of the warehouse, the warehouse manager surnamed Lu who just sent the report was in the shift with the one on the day shift, and seemed to be arranging something.

"Old Lu, there is something wrong with your statement, you almost screwed me, do you know that!?" Because of his anger, Tian Feng didn't care about giving face to the old Ku, surnamed Lu, and shouted loudly in front of everyone. .

"Be careful what you say! What's wrong with my statement?" Although he knew that Tian Feng was a relative of the factory manager, as an old warehouse manager, he was reprimanded by Tian Feng in front of so many people. Can't get off the stage.

"Come and see for yourself." Tian Feng handed the form in front of Lao Lu, pointed with his finger, and said, "Look at the amount at the No. 13 station, 732 were processed in one night." Stigma! Has this dam monkey changed!? If I don’t check it out, this month’s bonus will be wasted, so you give me the money!?”

"Well." Old Lu Wenyan was stunned for a moment, but then said: "I counted it just now, that's right..."

"Are you still stubborn? Use your brain to think about it, is it possible? The workload of this No. 13 station in one night is higher than that of other stations in half a month! The model workers in our factory are not so ruthless!" Tian Feng usually seldom cares about other people's face when he talks in the factory. After all, the factory manager is his second uncle, and he doesn't pay attention to ordinary grassroots workers.

"Anyway, I must have counted it, no, you can go in and count it again." Old Lu said with a stern face.

"I won't cry without seeing the coffin!" Tian Feng glared at Lao Lu, then strode into the warehouse.

The finished products processed by the night shift last night are stacked on the right side of the warehouse. The finished products produced by each station are placed in their own iron boxes to facilitate quality inspection and statistics.

But when Tian Feng walked to the iron box marked No. 13, he was stunned.

It turns out that there are indeed as many stigmas as hills stacked in the box at this time, and there is no trace of oxidation from the light. Obviously, it should have been processed just last night.

"Since you don't believe the technician of Tianda University, then count it yourself." Old Lu who followed behind said with a cold snort.

In fact, seeing the height of the pile of stigmas in the box, Tian Feng knew that he was wrong.

But for the sake of face, he pretended to be responsible and counted it again.

"Technician Tian Da, is there something wrong with the numbers on my report?" After seeing Tian Feng counting the second time, the corners of his mouth twitched, and his tone was somewhat playful.

"I'm just responsible for my work!" After Tian Feng finished speaking, he turned and left the warehouse with a stern face.

But walking in the aisle of the workshop, the more Tian Feng thought about it, the more something went wrong. He suddenly remembered that the No. 13 station should be the lathe used by Han Zhong before, but now it is placed on Duan Yunding, and Duan Yun, a small apprentice, is obviously impossible. Processing so many finished products in one night!
Moreover, this amount is really astonishing. If rewards are carried out according to the current bonus system in the workshop, Duan Yun could earn more than 50 yuan in bonuses last night, which is higher than his monthly salary as a technician. Imagine things!
Filled with shock and doubts, Tian Feng came to Duan Yun's work station.

At first glance, Tian Feng saw that something was wrong with this lathe.

The feed box of the lathe is deformed, obviously it has been simply modified. In addition, there is an angle iron frame on the outside of the lathe, which is definitely not the original workpiece on the machine!

Tianfeng knows what it means to modify a lathe without permission.

Even for a technical person like him, if he wants to modify the lathe, he must first make a complete set of schematic drawings, and then submit it to the chief engineer. After approval by the factory leader, it can be carried out. Retrofit experiments.

And Duan Yun, an apprentice who has only been on the job for two days, obviously has no right to modify the lathe. Once this happens, even if there is no accident that damages the lathe, he will definitely be punished by the leader!

In Tian Feng's opinion, Duan Yun should not have the ability to modify lathes, but his master Han Zhong is an old technician with decades of work experience. In terms of lathe structure, he is even better than his technician. through.

Thinking of the production figures on the report just now, Tianfeng seems to be a little surprised...

The next moment, like a police officer eager to make meritorious deeds collecting evidence at a crime scene, Tian Feng looked excited and began to check the modification of this lathe.

Tian Feng is a man who must be revengeful. The scene when Duan Yun beat him has become a shame in his life. He must avenge this revenge, and now is a perfect opportunity.

When he opened the tool box next to the lathe, he found some gear workpieces and two servo motors from the bottom of the box.

Just when Tian Feng was about to report these things as evidence to the workshop director, he inadvertently found that there was a notebook inside the tool cabinet.

Out of curiosity, Tian Feng took out the book and looked at it twice.

But when turning to the back, a mechanical sketch full of annotations immediately caught Tian Feng's attention.

Tian Feng recognized at a glance that this should be the drawing of this lathe modification!

Looking at this drawing, Tian Feng thought for a while, and after a while, he suddenly had another idea.

The next moment, Tian Feng tore the modified sketch from the book, folded it, and put it in his pocket.

Immediately afterwards, he quickly put the modified gear workpieces and servo motors that he originally wanted to report to the workshop director as 'criminal evidence', together with the notebook, and quickly put them back into the toolbox, then clapped his hands in fear, and walked away with a nonchalant expression on his face. ...

(End of this chapter)

Tap the screen to use advanced tools Tip: You can use left and right keyboard keys to browse between chapters.

You'll Also Like