Countercurrent 1982

Chapter 205 Factory Inspection
After the commendation meeting was over, everyone else left, but Duan Yun was stopped by Zhao Dongsheng and left with other factory leaders.

"When the two leaders from the city are going to visit the factory to see your modified automatic lathe, you will be in charge of the operation and perform well." Zhao Dongsheng held Duan Yunan backstage and said.

"Understood." Duan Yun nodded upon hearing this.

Although Duan Yun was still thinking about the antenna business of his workshop at this time, Duan Yun was still a little excited to be in contact with the two leaders in the city.

For Duan Yun, whether it is his future development in the factory or the business of the workshop, especially if he wants to set up his own small private factory in the future, it will be difficult if he does not get the support of his superiors.

In fact, Duan Yun also understands that according to the current national policy, it is impossible for Duan Yun to start a private company in the city. Duan Yun can use his connections in the government to become the first batch of "early adopters" in Daxing.

And it is undoubtedly a very good opportunity for Duan Yun to be able to contact the city leaders for the first time today.

Qin Gang, Zhao Dongsheng and other leaders surrounded Ruiyang and Kong Guoqiang talking and laughing, with smiles on their faces, while Duan Yun walked slowly behind these leaders.

After the group entered the factory area, they went straight to the first workshop.

Ruiyang and Kong Guoqiang obviously have no interest in visiting the entire Hongxing Gear Factory. Their only purpose is to see the automatic lathe modified by Duan Yun.

Although the entire factory has been on holiday since today, there are still some workers staying behind in each workshop. Seeing the factory leaders enter the workshop, they all looked over.

"This is the automatic lathe modified by Comrade Duan Yun. In the past, if workers operated manually, they could process four or five finished products in an hour. Since it was modified by Duan Yun, the processing proficiency in one hour has increased to more than 20, which has increased by five times. efficiency." Zhao Dongsheng introduced to Ruiyang and Kong Jianguo with a red face.

Generally speaking, the opportunity to show up in front of the superiors in technical reform is reserved for the technical director of the factory, and it is impossible for a small worker like Duan Yun to be the protagonist. But today, Chang Lin, the chief engineer, stood behind the crowd. He looked a little embarrassed.

Last time, the lathe technical transformation plan designed for Tian Feng fell short in the end. After losing to Duan Yun, Cheng Changlin's self-esteem was greatly hit. Although only he, Qin Gang and Tian Feng knew about this matter, the dignified chief engineer of the factory actually Can't compare to Duan Yun, a small apprentice, so Cheng Changlin has been depressed and taciturn for a month.

The chief engineer didn't show up, Duan Yun naturally wouldn't give up this opportunity to get close to the city leaders.

Unlike Kong Guoqiangzhe, an official with an administrative background, Ruiyang, director of the Bureau of Light Industry, had a technical background when he was young and knew a lot about machine tools. It was precisely because he knew about machine tools that Duan Yun After the modification of the lathe to improve such a high efficiency, deep doubts arose. Today, I decided to visit the Hongxing Gear Factory in person to see if this is true.

"Duan Yun, show it to Deputy Mayor Kong and Director Rui." Zhao Dongsheng said to Duan Yun with a smile.

"Hey." After Duan Yun heard the words, he rolled up his sleeves, put the tooth embryos in the material storage box on the automatic iron frame of the lathe, and then started the lathe.

This new lathe has been optimized and improved by Bie Duanyun in the past half a month. While the performance has been improved, the waste and iron chip collection device has also been strengthened. It seems that the automatic machine tool can always maintain a very clean processing state. The entire processing process can be seen It looks more refined and safer.

"laugh!"

After the main engine is started, the whole lathe runs very smoothly. The blanks are rolled into the angle iron groove one by one, and after being automatically installed on the spring chuck, with the rolling of iron filings, the finished tooth blanks are produced one by one. been processed.

"In addition to considering the improvement of processing efficiency, our factory's technical transformation this time also attaches great importance to the safety of machine tools and personnel, so as to truly achieve stability, safety, and efficiency!" Duan Yun also saw that Duanyang is a true technical expert. So the focus is on explaining in front of him.

"En." Duanyang nodded lightly when he heard the words, and then said to Duan Yun: "Where is the design drawing of your machine, I want to see it."

"Go get the drawings." Qin Gang turned his head and said to Cheng Changlin.

"Yes." Cheng Changlin turned and left the station upon hearing this.

This scene seemed somewhat unbelievable. Duan Yun, a small apprentice, was standing at his work station to introduce the product technology to the superiors, while the majestic chief engineer of the factory was running errands to get the blueprints.

It can be seen from this that Duan Yun has indeed become a benchmark in the technical transformation of the factory, and has the right to speak in this regard.

This is definitely a good sign for Duan Yun. Today's situation also means that there will be technical problems in the factory in the future. He also has the opportunity to make suggestions and speak.

After staring at the machine for more than ten minutes, Cheng Changlin took Duan Yun's design drawings from the reference room of the technical department.

When there was no technical transformation competition before, the blueprints were always kept by Zhao Dongsheng. After the competition, Duan Yun's technical transformation drawings and materials belonged to the factory, and in exchange for Duan Yun's current title of model worker and a house , this deal is quite a bargain.

Ruiyang is very strict in his work style. He used to be responsible for the maintenance of MiG fighters on the ground in the Air Force, and he also developed a meticulous technical style there. Later, he specialized in technical work in the 616 factory for a period of time. Although Ruiyang has been engaged in administrative work in the Light Industry Bureau in recent years, he has always maintained a rigorous style of technical work.

Seeing that the machine tool has been running very stably for more than ten minutes, Ruiyang nodded slightly, then spread out the design drawings and looked at them carefully.

As soon as the experts make a move, they will know if there is any.

Rui Yang looked down at the drawing, but soon, a look of surprise flashed across his face.

"Wonderful...it actually uses such a double sliding gear design..." After a while, Rui Yang couldn't help asking Duan Yun: "You really designed this drawing by yourself?"

In Ruiyang's view, this design drawing is very sophisticated and concise, basically without any notes, it is easy to see Duan Yun's design ideas, and the dimensions and labels of each workpiece are also quite rigorous and accurate. It doesn't look like a novice can draw it, but more like the work of a master with more than ten years of working experience and technical attainments.

"This is indeed a drawing designed and drawn by Comrade Duan Yun." Zhao Dongsheng also interjected at this time, saying: "Comrade Duan Yun is very smart and has always been obsessed with the mechanical profession. A model of self-taught talent."

"Self-taught? This is really rare." Ruiyang looked at Duan Yun with a little more approval.

(End of this chapter)